Sharp LC-19SH7E Service Manual / Specification ▷ View online
2008-03-14
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
17
Fig.19
2. Remove the 4 screws. Detach the Neck as Fig.19.
Step 2. Remove the REAR COVER Assy.
1. Remove the 7 screws. Detach the
REAR COVER
as Fig.20.
Fig.20
Step 3. Remove the Main, Power board and the Speakers.
Fig.21
1. Remove the 5 screws and disconnect 4 cables. Detach the Main board as Fig.22 and Fig.23.
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
18
Fig.22
Fig.23
2. Remove the 5 screws and disconnect 2 cables. Detach the Power board as Fig.24.
Fig.24
3. Remove the 4 screws. Detach the Speakers as Fig.25.
Fig.25
Step 4. Remove the Bracket and Bezel.
1. Remove the 8 screws. Detach the Bracket as Fig.26 and Fig.27.
2008-03-14
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
19
Fig.26
Fig.27
2. Remove the 4 screws. Detach the Bezel as Fig.28.
Fig.28
Panel:
Fig.29
Step 5. Remove the IR and Key board.
1. Remove the 2 screws and disconnect 1 cable. Detach the IR board as Fig.30.
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
20
Fig.30
2. Disconnect 1 cable. Detach the Key board as Fig.31.
Fig.31
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
Click on the first or last page to see other LC-19SH7E service manuals if exist.