DOWNLOAD Sharp LC-15M4E (serv.man10) Service Manual ↓ Size: 1.06 MB | Pages: 26 in PDF or view online for FREE

Power ON/OFF
button

AV INPUT
button

SELECT (])/([) buttons

Sound MUTE button

Infrared transmitter window

MENU button

VOL (+)/(–) buttons

■ The side control section of the main unit is also provided with the AV INPUT, SELECT (])/([),

VOL (+)/(–) and MENU buttons.
* When this manual describes button functions, it is referring to the buttons on the remote control.

+

The main power
switch is not
provided on the
remote control.

Menu control section

LC-15M4E(05-10)Eng.p65

01.6.15, 4:42 PM

7

Slide MAIN POWER, located on the

right side of the main unit, to the 
position.

The power indicator instantaneously
changes from red to green and the
main unit is turned on.

■ When the Power indicator is red, press

ON/OFF on the remote control to turn on
the monitor.
The Power indicator changes from red to
green.

■ The input mode indication disappears after

five seconds.

Initial mode (AV1)

Turn on the power of the connected
video equipment.

Press AV INPUT and select the
applicable input source. The screen
displays AV1 or AV2 mode at the
upper right corner each time AV
INPUT is pressed.

■ The AV input mode indication remains for

five seconds.

• AV1: Video equipment connected to the

AV1 input terminals.
The display of the AV1 mode indicates
either AV1 or COMPONENT depend-
ing on the adjustment of the FEA-
TURE settings.
AV1 is displayed when AV1 is set to
NORMAL in the FEATURE settings,
and COMPONENT is displayed when
AV1 is set to COMPONENT.
(see page 14)

• AV2: The AV2 mode can be set to either IN

or OUT in the FEATURE settings.
(see page 14)
AV2 indication is not displayed when
the mode is selected to OUT.

Power/Standby indicator

▼ On-screen display

AV1 mode

AV2 mode

LC-15M4E(05-10)Eng.p65

01.6.15, 4:42 PM

8

| Press VOL (+) to increase the sound

volume. The indicator segment
increases.

| Press VOL (–) to decrease the sound

volume. The indicator segment
decreases.

| Press MUTE to temporarily turn off the

sound.
The MUTE mark 

 is displayed.

| Press MUTE or VOL (+)/(–) to turn the

sound back to the previous level.
The MUTE mark 

 disappears.

■ MUTE is automatically cleared when the

following button is pressed: ON/OFF,
VOL (+)/(–) or MUTE.

Press ON/OFF.
The power indicator turns red.

Press ON/OFF again.
The power indicator turns green.

LC-15M4E(05-10)Eng.p65

01.6.15, 4:43 PM

9

• This LCD monitor set allows you to adjust the picture, sound, and other features using the On-screen

Display. Select the desired menu item by following the steps below and then refer to the indicated page
for details.

Press MENU to display the MENU
screen.

Press SELECT (])/([) to select
the desired menu item.

• The cursor moves up or down.
• The cursor indicates the selected

menu item.

Press VOL (+)/(–) to enter.

Press MENU again to exit.

■ The displayed items differ depending

on the setting conditions.

■ The selected item is highlighted in

yellow.

■ Items in purple cannot be selected.

■ The original screen is restored by

pressing MENU on the menu screen
or any of the adjustment screens.
The original screen is also restored
when no buttons have been pressed
for about a period of 30 seconds.
The adjustment values and settings
that were changed before the screen
is restored are saved as is in the
memory.

SELECT
(])/([)

* The screen indications shown above are larger than actual size for easy reading.

(Pages 14 and 15)

(Pages 12 and 13)

(Page 11)

LC-15M4E(05-10)Eng.p65

01.6.15, 4:43 PM

10