Sharp LC-15M4E (serv.man10) User Manual / Operation Manual ▷ View online
19
Connecting to External Devices (Continued)
Watching TV
To view a TV broadcast on the LCD monitor, the set-top box must be used with a TV tuner, satellite tuner
or VCR. Refer to the diagram below for wiring.
or VCR. Refer to the diagram below for wiring.
TV
ROOM ANTENNA
SET-TOP BOX
MONITOR
TERMINAL
TV BROADCAST
(ON AIR)
(ON AIR)
VIDEO
(BNC TYPE)
AUDIO
R
L
TV ANT
RF IN
VIDEO OUT
VCR
VIDEO
AUDIO
R
L
TV TUNER
RF IN
VIDEO OUT
TV ANT
(BNC TYPE)
CABLE
VIDEO
AUDIO
R
L
VIDEO
AUDIO
R
L
RF IN
VIDEO OUT
SET TOP BOX
(BNC TYPE)
SATELLITE
VIDEO
AUDIO
R
L
SATELLITE TUNER
RF IN
VIDEO OUT
(BNC TYPE)
VIDEO
AUDIO
R
L
TEL, LINE
VIDEO OUT
Web
SET TOP BOX
SET TOP BOX
TV ANT
RF IN
(BNC TYPE)
PAY TV
SATELLITE TV
WEB TV
LC-15M4E(16-23)Eng.p65
01.6.15, 4:40 PM
19
20
Example of Application
Mounting the LCD monitor on a wall
Note:
■ Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materi-
als may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)
1
Mount the supplied wall mount bracket on
the wall with 4 wall mount screws
(commercially available).
the wall with 4 wall mount screws
(commercially available).
Note:
■ Make sure that the screws are suitable for the
particular wall material.
CAUTION:
The wall mount bracket must be
installed with 4 screws. Tighten
the screws so that the bracket can
support a weight of at least 20 kg.
the screws so that the bracket can
support a weight of at least 20 kg.
2
Mount the back stand of the main unit on the
wall mount bracket with the supplied fixed
screw.
wall mount bracket with the supplied fixed
screw.
■ To mount the LCD monitor at a larger angle for a
business occasion, use the optional bracket such as
the AN-150AG1. This bracket may not be available
in some countries.
the AN-150AG1. This bracket may not be available
in some countries.
Fixed screw (
× 1)
(Supplied)
Wall Mount Bracket (
× 1)
(Supplied)
Wall Mount Screw (
× 4)
(Commercially available)
* To change the vertical angle of the
monitor, tilt the screen up to 8°
downward. Adjust the angle of the
monitor for the most comfortable
viewing.
downward. Adjust the angle of the
monitor for the most comfortable
viewing.
Mounting with the optional AN-150AG1
wall mount bracket
wall mount bracket
LC-15M4E(16-23)Eng.p65
01.6.15, 4:40 PM
20
21
Troubleshooting
Problem
Check item
Pages
No image on screen, and
no sound from speakers.
no sound from speakers.
• Make sure that the AC power cord plug is securely
inserted in AC power outlet and AC adapter.
• Make sure that the AC adapter’s DC output is securely
connected to main unit’s DC input terminal.
• Make sure that the main power switch of the main unit is
on.
• Make sure that the AV input is properly set.
• Make sure that the cables are correctly connected to
• Make sure that the cables are correctly connected to
rear terminal section of LCD monitor.
• Check to see if the batteries in the remote control have
sufficient power.
• Make sure that the unit is not in the standby mode
(power indicator is red).
Speakers produce sound,
but no image on screen.
but no image on screen.
• Make sure that the cables are correctly connected.
Image is too light or
improperly tinted.
improperly tinted.
• Check COLOUR and TINT adjustments. (NTSC ONLY)
• Check CONTRAST and BLACK LEVEL adjustments.
• Check RED-BLUE adjustments.
• Make sure that the VCR connection cord is correctly
• Check CONTRAST and BLACK LEVEL adjustments.
• Check RED-BLUE adjustments.
• Make sure that the VCR connection cord is correctly
connected to the COMPONENT terminal.
Image is displayed, but no
sound from speakers.
sound from speakers.
• Make sure that the cables are properly connected to
rear terminal section of LCD monitor.
• Check the volume adjustment.
• Make sure that the sound is not muted.
• Make sure that the headphones are not connected.
• Make sure that the sound is not muted.
• Make sure that the headphones are not connected.
Image is too dark.
• Check to see if BRIGHTNESS is set to DARK.
• Check CONTRAST and BLACK LEVEL adjustments.
• Lamp may have reached the end of its life. (Contact a
• Check CONTRAST and BLACK LEVEL adjustments.
• Lamp may have reached the end of its life. (Contact a
Sharp service shop for a lamp replacement.)
No colours on image.
• Check COLOUR adjustment.
• Check the colour system setting.
• Make sure that the VCR connection cord is correctly
• Check the colour system setting.
• Make sure that the VCR connection cord is correctly
connected to P
B
(C
B
) and P
R
(C
R
) of the
COMPONENT terminal.
4
7
7
4
8
16, 17
13
9
9
9
18
14
13
• Check to see if the batteries in the remote control
have sufficient power.
• Make sure that (+) and (–) side of batteries are
properly positioned in remote control.
• Make sure that the remote sensor window is not
under strong fluorescent lighting.
Remote control does not work.
4
13
13
4
13
LC-15M4E(16-23)Eng.p65
01.6.15, 4:40 PM
21
22
Specifications
ITEM
LC-15M4E
LCD
Size
15”
Number of dots
921,600 (640
× 3 × 480) dots
Low reflection
Non-glare
BRIGHTNESS
450cd/m
2
(at normally white)
Viewable angle
Left to right
160°
Upper to lower
160°
Life of back light
60,000 hours (at normal mode)
COLOUR
System
N358/N443/PAL/PAL-M/PAL-N/PAL-60/SECAM
SYSTEM
AUDIO
Output
3.4W (0.7W
× 2 + 2.0W)
Speaker
Full range
3 cm
× 4 cm Oval, 2 pcs.
Woofer
6.5 cm Round, 1 pc.
INTERFACES
AV 1 IN
Audio R/L, Video Composite (BNC TYPE)
(TERMINALS)
Component input, Y/P
B
(C
B
)/P
R
(C
R
)(BNC TYPE)
AV 2 IN/OUT
Audio R/L, Video Composite (BNC TYPE)
Headphone jack
Mini-jack for stereo
POWER SUPPLY
DC operation
DC 12V
AC operation
AC110~240V with AC adapter
Power consumption
35 W (at maximum brightness)
31 W (at normal brightness)
31 W (at normal brightness)
APPEARANCE
Exterior colour
Silver
Outside dimensions
357.0 (W)
× 309.2 (H) × *62.5 (D) mm
Net weight
X.X kg
ACCESSORIES
Operation manual
language: English/German/French/Italian/
Spanish/Swedish/Dutch
Remote control
Infrared wireless type
Wall mount parts
Wallmount bracket
× 1 pc.
fixed screw
× 1 pc.
AC adapter
Auto-wide type
AC cord
#
OSD LANGUAGE
Language
English/German/French/Italian/Spanish/
Swedish/Dutch
Swedish/Dutch
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
* Excluding set stand.
product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
* Excluding set stand.
LC-15M4E(16-23)Eng.p65
01.6.15, 4:40 PM
22
Click on the first or last page to see other LC-15M4E (serv.man10) service manuals if exist.