DOWNLOAD Sharp LC-15L1E (serv.man17) Service Manual ↓ Size: 3.64 MB | Pages: 59 in PDF or view online for FREE

• Game devices must always be connected to the input terminal of the main unit. If a game device is connected to the Wireless Centre, you

cannot enjoy the game comfortably because of a delay in the transmission of pictures and sound.

• When connecting to both the VIDEO input and S-VIDEO input terminals for AV-IN 4, priority is given to the S-VIDEO input terminal.

• When signals from external devices connected to the Wireless Centre do not appear to be transmitted to the main unit properly, connect

the external devices to the AV-IN4 terminal of the main unit.

VIDEO

S-VIDEO

AUDIO

R

L

(Red)

(Yellow)

(White)

(Red)

(White)

(Yellow)

Audio/Video cord
(commercially
available)

S-Video cord (commercially available)

Cable clamps

AC wall outlet 

1 Insert cable clamps into the hole for 

the Table stand.

2 Cables are fitted in the cover of the Table 

stand and then fitted into the cable 
clamps.

Reference

page

Picture

There is no
picture or sound.

There is no
sound.

Picture is not
clear.

Picture is too
light or
improperly
tinted.

The picture is
too dark.

Remote control does not work.

There is no
picture or sound,
just noise.

Sound

Picture

Before calling for repair services, make the following checks for possible remedies to the symptoms encountered.

There is no
picture.
There is no
picture from  AV-
IN terminals.

Problem

Check item

• Make sure the AC adapter is properly inserted in the power

outlet.

• Reception other than that of broadcasting stations could be the

problem.

• Make sure the input mode is set to TV.
• Make sure the main power switch of the main unit is on.
• Is the power supply for Wireless Centre on?
• Change the orientation or location of the main unit or Wireless

Centre.

• Make sure Picture adjustment is properly adjusted.
• The fluorescent lamp may have reached the end of its service

life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure the headphones are not connected.

• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
• Change the orientation or location of the main unit or Wireless

Centre.

• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.

• Check the colour adjustment.

• Check if “Brightness” is set to “dark”.
• Check “Contrast” and “Black level”.
• The fluorescent lamp may have reached the end of its service

life.

• Check if batteries in the remote control have sufficient power.
• Make sure the remote sensor window is not under strong

lighting.

9

–

17
17
10

–

21

–

45

18
18
12

9
–
–

9
–

21

27, 28

21

–

8
8

• The radio waves used by the product are high frequency, so that

there are features such as direct advance travelling, reflection,
refraction, diffraction, interference etc., similar to that of light.
The strength of the waves therefore varies depending on the
location, which may cause the pictures and sound to become
unclear, become wavy, or stop.

• Is the distance between the Wireless Centre and the television

product too far? Use within a range that the radio waves can
reach.

• Are you at a location that is particularly susceptible to electrical

noise?.

• Set “Distance” to “far”.
• The product utilises wireless transmissions, so that fast moving

images may become distorted, but this is not a malfunction.

• Are there any devices operating in the vicinity of the product

such as Bluetooth devices, or wireless LANs, or microwave
ovens, etc. that utilise the same frequency band (2.4 GHz) as
the product?

• There are good and bad positions in terms of wave conditions

with regards to the influence of obstacles and reflectors. Try
changing the location of the television product slightly.

• Is the video controller connected?
• Is the transmitter of the video controller facing the infrared

receiver of the remote control for the VCR?

• Does the VCR work when operating the remote control by

directly facing the VCR? (If the VCR is still not working, it can be
considered that the battery of the remote control has run out.)

Reference

page

6

–

6

30

–

6

6

45
45

45

■ Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C (–4°F to +140°F))

Problem

Check item

Blocks of noise appear on the pictures.
Sound becomes interrupted.

Pictures are suddenly stopped and
sound is interrupted.

Pictures and sound cannot be received.

The VCR will not operate even though
the remote control is operated by facing
towards the TV main unit.

■ It is not a malfunction in the following cases.

• There are cases where reception of pictures is not good because of the distance between the main unit and Wireless Centre,

or obstacles. Install the main unit and Wireless Centre where you can get better pictures by changing the installation location
or removing obstacles.

• There may be bad reception of pictures if a microwave is being used nearby.
• Microwave units and the use of the so called “blue tooth function” (W LAN) on mobile phones or notebooks may impair the

quality of the transmission. If this is the case, switch these devices off.

Problem

Check item

• The reception may be weak.
• The quality of the broadcast may also be bad.
• Make sure the antenna is facing the correct direction.
• Make sure the outside antenna has not been disconnected.

• Make sure the antenna is facing the correct direction.
• Broadcast waves may be reflected from adjacent mountains or buildings.

• There may be interference from automobiles, trains, high-voltage lines, neon lights, etc.
• There may be interference between the antenna cable and power cable. Try positioning

them further apart.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations and transmission antennas of
amateur radios and cellular phones may also cause interference.

• Use the unit as far apart as possible from devices that may cause possible interference.

The picture is
not sharp.

The picture has
ghosting.

There are
stripes on the
screen or
colours fade.

The picture
shakes.

The picture is
spotted.