DOWNLOAD Sharp LC-15L1E (serv.man17) Service Manual ↓ Size: 3.64 MB | Pages: 59 in PDF or view online for FREE

• Video camera
• Home video game system
• VCR
• Laser disc player
• DVD
• Decoder

* The home video game system is connected to the AV-IN4 terminal on the rear of the main unit.
* PC connection is not possible.

• Use a commercially available audio/video cord for the cable.

• Only connect audio/video signals to AV-IN 1, 2 and 3 terminals. Connecting other signals may result in a malfunction.

• The VIDEO input terminal and the S-VIDEO input terminal on the AV-IN 3 side are shared connections with priority given to the S-VIDEO

terminal. If both terminals are connected, the video signals from the S-VIDEO input terminal are selected for the AV-IN 3 input.
When viewing video from the VIDEO input terminal, do not connect anything to the S-VIDEO input terminal.

• For details concerning usage and connection of external devices, see the respective operation manuals.

It is possible to enjoy video and sound by connecting a VCR and home video game system to the terminals located on the
rear of the main unit or Wireless Centre.
When connecting an external device, turn off the power of the main unit, Wireless Centre and connecting device to prevent
any possible damage.

To AV-IN1, AV-IN2 or 3 terminal

1. Audio right output

8. Audio-video control

15. RED input

2. Audio right input

9. Earth for green

16. RED/GREEN/BLUE control

3. Audio left output

10. Not used

17. Earth for video

4. Common earth for audio

11. GREEN input

18. Earth for RED/GREEN/BLUE control

5. Earth for blue

12. Not used

19. Video output

6. Audio left input

13. Earth for red

20. Video input (PAL/SECAM/NTSC)

7. BLUE input

14. Not used

21. Plug shield

21-pin Euro-SCART
connector

To AV-IN1
(21-pin Euro-SCART)
terminal

1

3

5

7

9

11 13 15 17 19 21

2

4

6

8

10 12 14 16 18 20

■ Place where Wireless Centre is installed

Wireless Centre should be placed on or beside video equipment. However, make sure that the Wireless Centre is as far as
possible away from the antenna input terminal of a television or video equipment.

Regarding S-VIDEO terminal
• When VIDEO input/output and S-VIDEO input/output are connected at the AV3/AV4 input/output of this unit at the same time, S-VIDEO

input/output has priority over the other.

Regarding video controller
• Connect VIDEO terminal and AUDIO output terminals of equipment to play an image to VIDEO terminal and AUDIO input terminals on the

Wireless Centre respectively. After that, connect the video controller to the video control terminal of Wireless Centre.

• When installing video controller, make sure that this transmitter is facing the infrared receiver of the remote control for the connected

equipment. It is possible to operate a connected equipment by facing the remote control for the equipment connected to the Wireless
Centre towards the infrared receiver of the remote control for the main unit (TV unit) and pressing the button.

AC wall

outlet 

AC adapter

AC cord*

AC wall outlet 

AC cord

ANT

S-VIDEO

AUDIO

DIGITAL

OPTICAL

CO-

AXIAL

OUT

IN

TV

R

L

AUDIO

VIDEO

R

L

AUDIO

VIDEO

R

L

To Audio/Video

output terminal

To Video control terminal

To AV-IN3 (S-VIDEO) terminal

To AV-IN2 (AV) terminal

To S-VIDEO output terminal

To Audio/Video 
output terminal

To input/output terminal

Installation
example

(The video controller should be 
fixed with the accessory tape once 
the place where it is to be installed 
has been decided.)

To AV-IN1 (RGB)

terminal

(Red

)

(White

)

(Yellow

)

(Red)

(White)

(Yellow)

The video controller is fixed so that 
the transmitter of the video controller 
faces the infrared receiver of the remote 
control for the video equipment.

Video controller (supplied)

* Product shape varies in some countries.

When connecting to 
equipment with 
an S-video terminal.

S-video cord
(commercially available)

Audio/Video cord
(commercially available)

Connect to the terminal 
of the same colour.

Infrared receiver of the remote
control (an example)

■ Cautions regarding installation of video controller

•

The position of the infrared receiver of the remote control varies depending on the manufacturer or the type of the video
cassette recorder. Generally, it is a small round-shaped part close to the liquid crystal display portion.

•

Make sure that the transmitter of the video controller is facing the infrared receiver of the remote control.

•

When installing the video controller, try first to transmit remote control signals from the equipment connected with the Wireless
Centre to the main unit to find a position where the connected equipment can be operated.

When watching played back images from external equipment, operations are carried out
such as switching over the input source using the remote control for the TV main unit, and
playing back and selecting channels using the remote control for the external equipment.

/

PLAY

STOP

OPEN/

 CLOSE

OPERATE

VCR/DVD

SELECTOR

VCR MENU
DVD SETUP

TAPE

SPEED

ON

SCREEN

TIMER

ON/OFF

TITLE

DVD MENU

DISPLAY

EJECT

FUNCTION
CONTROL

PROG/

REPEAT

CLEAR  

RETURN

REV

FWD

SET

ENTER

ZERO BACK

VCR    DVD

AM/PM

INPUT SELECT

PAUSE/STILL

REC

VCR/DVD COMBINATION

SLOW

CH

VCR

DVD

SKIP

DPSS

AUDIO

OUTPUT

ZOOM

KARAOKE

SELECT

SKIP SEARCH

CH

MENU

E

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

SUBPAGE

TEXT

ROTATE

WIDE

T

CH

OK

E

TV/VIDEO

REVEAL

HOLD

END

MENU

SOUND

SUBTITLE

SUBPAGE

TEXT

ROTATE

BRIGHT

T

M

T

CH

MENU

E

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

SUBPAGE

TEXT

ROTATE

WIDE

T

CH

E

TV/VIDEO

REVEAL

HOLD

END

MENU

SOUND

SUBTITLE

SUBPAGE

TEXT

ROTATE

BRIGHT

T

M

T

OK

Turn on the power supply for Wireless
Centre.

Turn on the power supply for the external
equipment.

Regarding operating method, refer to the
operation manual for the equipment.

Press TV/VIDEO to select the video input
source being connected to.

Make operations such as playing back or
selecting channels using the remote
control for the external equipment.

Power ON

The remote control
for the main unit is
used for switching
over the input of
the main unit.

The remote control
for the external
equipment is used
for operating a
VCR or a DVD.