DOWNLOAD Sharp 66GS-62 (serv.man16) Service Manual ↓ Size: 646.71 KB | Pages: 34 in PDF or view online for FREE

Model
66GS-62 (serv.man16)
Pages
34
Size
646.71 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / CTR / , whole document
File
66gs-62-sm16.pdf
Date

Sharp 66GS-62 (serv.man16) User Manual / Operation Manual ▷ View online

4
Remote Control
TV
1.  Stand-by ON/OFF switch (TV)
Video
2.  Power ON/OFF switch (VCR)
TV 
3.  Digit buttons 0~9
4.  Flashback button
Teletext
5.  Colour button (green)
6.  Colour button (red)
TV
7.  Volume Down/Cursor control left
8.  Menu button
Teletext
9.  Reveal button
10.  List selector
11.  Store button
12.  Cancel button
13.  Top/Bottom/Full button
14.  Reset button
Video
15.  Rewind/picture search/reverse
16.  Play button
17.  Pause / Still button
18.  Stop button
TV
19.  TV/VIDEO selector
20.  Channel call button
21.  Single/Double entry
Teletext
22.  Colour button (yellow)
23.  Colour button (cyan)
TV
24.  Channel Up/Cursor control Up
25.  Volume Up/Cursor control Right
26.  Channel Down/Cursor control Down
27.  TV button / Subtitle
TV/Teletext
28.  Time button
TV
29.  Sound mode selector
Teletext
30.  Hold button
TV
31.  Sound Mute button
Teletext
32.  Text/Mix button
33.  Index button
Video
34.  Channel Up selector
35.  Fast forward/picture search/forward
36.  Channel Down selector
37.  Record button
1.
19.
23.
21.
24.
25.
26.
27.
28.
29.
30.
31.
32.
34.
37.
36.
35.
33.
22.
20.
4.
5.
6.
7.
8.
10.
11.
12.
13.
15.
18.
17.
16.
14.
9.
2.
3.
5
HOW TO OPEN THE DOOR
Press the top of the door, opening it slightly.
Hook your finger inside and pull open.
FRONT TV
1. Main Power On/Off Switch
2.  Power Indicator
3.  Program Selector (UP/DOWN)
4. Volume Buttons (UP/DOWN)
5. Remote Control Sensor
6.  Sound Indicator
7.  Remote Control Indicator
8. DOOR
Behind the door
9.  Headphone Socket
(3,5 mm Ø 16 ~ 600 ohms)
Controls & Terminals
REAR TV
RF Input
1. Antenna terminal
21-pin In/Out
2. 21-pin Euro SCART (RGB)
3. 21-pin Audio/Video (AV-1) 
With S-Video Input
2
3
1
VIDEO
AUDIO
L/S/G/I
R/S/G/I
n
9
8
6
7
5
4
3
2
1
6
Aerial connections - TV set only -
Aerial connections - VCR and TV -
REAR OF TV
Mains Outlet Socket 
AC 220~240V, 50 HZ
Mains Outlet Socket 
AC 220~240V, 50 HZ
Mains Outlet Socket 
AC 220~240V, 50 HZ
Aerial Cable
(Not supplied)
Aerial (Not supplied)
Aerial Lead
(Not supplied)
Audio/Video
Aerial in
RF 
out
SCART Lead
(Not supplied)
NOTE: See on - Typical connections - (page 28) for details of further connection possibilities.
7
Auto Installation System
Your television set is provided with an Automatic Installation System
which makes installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. 
Connect the antenna jack in the antenna input terminal on the rear side
of your TV-set. Then connect the TV power cable to a 220 ~ 240V a.c.
system.
2. Press the main power button (
®), on the right hand side of the TV set,
and the AUTO INSTALLATION message will appear on the screen.
3. Put batteries into the remote control and follow the instructions on
the screen.
The TV will go through the following steps Automatically and sequentially:
Automatic Channel Sorting System (ASS): The TV set SEARCHES FOR
FREQUENCIES, memorises the channels found, and sorts them (accor-
ding to technical criteria) from Pr-01 of the TV, to a maximum of 99 pro-
grammes.
This tuning system may take several minutes to perform.
Editing: When the AUTOMATIC SEARCH has been completed, the list of
memorised programmes appears. In this menu, you can change the order
of the channels and change or give the channels a four letter name.
NOTE: You may not have to follow this procedure if it has already been
done for you at the establishment where you purchased your TV. If this is
the case, please go on to the section entitled «Switching ON» (page 9).
If you need to repeat the AUTO INSTALLATION, read on.
TO REPEAT THE AUTO INSTALLATION
1. 
Press the MENU button 
 to see the Main Menu.
2. Press the BLUE button 
to see the «TUNING Menu».
3. Press the Cursor UP button 
to select AUTO-TUNE.
4. Press the MENU button 
 to start the AUTO INSTALLATION.
Stored programmes
When the TV has finished the automatic search, the «Stored
programmes» menu will appear on screen with a list of the channels
which have been memorised with the available options:
a) Select programme to be edited 
/
b) Edit this program 
 Red button 
c) Go to sorting mode 
 Green buton 
d) Delete this program 
 Yellow button 
e) Exit this menu 
 Blue button 
With these options, you will be able to organise the real channels (CH **)
memorised in the TV programmes (Pr 01 … Pr 99) and put them into your
own preferred order.
The following is a detailed explanation of options a), b),c), d) and e), on
page 8.
CH
CH
CH
Auto Installation
Pr 01
CH21 BBC1
Pr 02
CH31 BBC2
Pr 03
CH41 ITV
Pr 04
CH51 CH4
Pr 05
CH61 CNN
Pr 06
––––
––––
Pr 07
––––
––––
Pr 08
––––
––––
Pr 09
––––
––––
Pr 10
––––
––––
Stored programmes:
 Edit this program
 Go to sorting mode
 Delete this program
 Exit this menu
Be sure the antenna cable ...
Press any button in
the handset to start.
Searching,
please wait.
Pr 01
01 %
SHARP
AUTO INSTALLATION
(red)
(green)
(yellow)
(blue)
Power Indicator
Main power button
1., 4.
3.
2.
Page of 34
Display

Click on the first or last page to see other 66GS-62 (serv.man16) service manuals if exist.