DOWNLOAD Sharp 66FW-54H (serv.man11) Service Manual ↓ Size: 648.44 KB | Pages: 36 in PDF or view online for FREE

22

Press the MENU button  

●

to see the MAIN Menu.

Press the GREEN button 

to see the AUDIO EFFECTS

Press the YELLOW button 

to see the EQUALIZER Menu.

Press the YELLOW button 

to select a pre-defined

equalization: Personal / Classic / Jazz / Pop / In concert / Sport .

To change the Personal option:

a) Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select:

100Hz, 330Hz, 1KHz, 3.3KHz or 10KHz 
The red point mark indicates the selected item.

b) Press the Cursor UP/DOWN buttons  

E

/ 

F

to

Adjust.

Note: The Equalizer adjustments are not operative for the    

headphones.

Press the BLUE button 

to see the STEREO Menu.

Press the Cursor UP/DOWN buttons  

E

/ 

F

to select:

Speakers matrix, Headphones matrix, AV Matrix [

] or

Identification.
The red point mark indicates the selected item.

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to change.

Select Speakers matrix to change the sound mode in the
speakers.
Select Headphones matrix to change the sound mode in the
headphones.
Select AV matrix to change the sound mode in the audio output
of the external connector (AV-1/AV-2).
Select Identification to activate (ON) or deactivate (OFF) the
automatic Identification of audio system of the current program
[

] .

Press the MENU button 

●

to close the STEREO Menu.

About Matrix: Depending on the sound transmission the sound reproduction can be chosen in the STEREO Menu.

In this menu you can select a sound mode to the speakers, another to the headphones and another to the external connectors (AV-1/AV-2).
When the TV set is receiving a STEREO NICAM programme, the TV selects STEREO automatically, and you can change:

STEREO 

MONO

When the TV is receiving a BILINGUAL NICAM programme, the TV selects DUAL CHANNEL A automatically, and you can change:

DUAL CHANNEL A 

DUAL CHANNEL B 

DUAL CHANNEL A B 

MONO

When the TV set is receiving a MONO NICAM programme, the TV set selects MONO NICAM automatically, and you can change:

MONO NICAM 

MONO

When the TV is receiving a MONO FM programme, the TV set selects MONO automatically but the sound mode cannot be change.

 

IDENTIFICATION ON: The TV automatically identifies the received audio system MONO FM, STEREO NICAM or DUAL NICAM SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into MONO FM.
This mode can be convenient when the level of the signal received is extremely weak. This function is independent for every program.

23

In this mode you can set the ON-TIMER and OFF-TIMER, set the CHILD LOCK, activate or deactivate the interactive
HELP, view the all functions implemented in your TV set demonstration and set the Post code.

Press the MENU button 

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

The On-Timer is used to programme switching ON the TV set during
the 24 hours of the day.
In order to be able to run this function, it is essential to adjust the
current time

Press the Cursor UP/DOWN buttons 

E

/

F

to select

“Current time”. The red point mark indicates the selected item.

Automatic TIME adjustment: If a programme with teletext is being
received, the “Current time” can be adjusted automatically with that
signal's clock.
To synchronize “Current time”, press Text/Mix button 

a

/

b

.

*

Important: If a signal via satellite is being received, or if correct time

cannot be obtained, the time will have to be adjusted manually.

Manual time adjustment: Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to adjust the “Current time” manually.

Press the Cursor UP/DOWN buttons  

E

/

F

to select “Programmed switch on at”. The red point mark

indicates the selected item.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to adjust the switch on.

To cancel the switch on, select 

.

Press the MENU button 

●

to close the ON TIMER Menu.

Press the Stand-by button ( 

æ 

TV) on the remote control to put the TV set into Stand-by Mode.

When the preset time is reached, the TV set turns ON and a picture appears on the screen.

* As a safety precaution, in the case of nobody being home when the television switches on automatically, the television
will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be
pressed.

Note: In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be
cancelled.

The OFF-Timer is used to programme switching the TV set to Stand-by
mode, after the set length of time has passed.
If necessary, repeat steps (1. ~ 2.) to see the Timer Menu.

Press the Cursor UP/DOWN buttons  

E

/

F

to select   “Off

timer status”. The red point mark indicates the selected item.

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select the desired

period (05 ( 180 minutes).
To cancel the OFF-Timer, select 

.

Press the MENU button 

●

to close the OFF -TIMER Menu.

Note: The off timer data will be cancelled if you turn off the TV by the
Stand-by button ( 

æ 

TV) on the remote control or with the Main power

button (

®

) on the TV set.

24

Your TV  is provided with Interactive Help, indicated on screen with the 

symbol, which contain guidance for TV

operation. With the option Help On/Off, you can display or hide the Help boxes.
1.

Press the MENU button  

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

“Help”. The red point mark indicates the selected item.

Press the Cursor LEFT/RIGHT buttons   

C 

/

I

to activate (On)

or deactivate (Off) the Interactive Help.

Press the MENU button  

●

to close the Menu.

The demonstration function allows you to see all the menus implemented in this TV set.
1.

Press the MENU button 

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

Press the GREEN button 

to see the DEMO Menu.

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select: Complete or Only

autoinstallation

Press the BLUE button 

to begin the demonstration.

Press any button on the remote control to exit this function when you wish.

This option allows you to set a code which will be displayed at TV switch on time. There is a password to change thecode.
1.

Press the MENU button 

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

Press the BLUE button 

to see the POST CODE Menu.

Password: enter the 4-digit using the number buttons.
It is indispensable to enter the «Password» in order to continue
configuring the «Post Code».

Press the BLUE button 

to memorize the «Password» or to

have access to the next item.

Press the Cursor DOWN button 

F

to select «Post code».

Press the Cursor RIGHT button  

I

to select the first position.

Press the Cursor UP/DOWN buttons  

E

/

F

to set or

change the first letter/number. Letters A to Z of the alphabet, a
blank space and the numbers 0 to 9 will appear sequentially.

Press the 

I

button for changing the position of the cursor and

the    

E

/

F 

buttons for changing the letters (repeat this

action for other letters/numbers).

10. When you have finished the eighth letter, press the 

I

button to quit the «Post code» box.

11. Press the BLUE button 

to memorize the «Post Code».

If you wish to cancel all the data, select «Eliminate post code and password» and press the BLUE button 

.

12. Press the MENU button 

●

to close the Menu.

About Post code: If you memorize a «Post Code», in the event of lose or robbery of TV set and later recovery,
you can identify your TV set by «Post Code».
Notes: As a precautionary measure, make a note of your «Password» and the «Post Code», and keep it in a
familiar place.
IF YOU LOSE OR FORGET YOUR «PASSWORD», CONTACT YOUR TECHNICAL SERVICE OR DEALER.

25

You can lock a TV channel to prevent unsupervised TV viewing by following these procedure.
The protection can apply to the television itself «LOCK ALL» or to specific programmes «LOCK PROGRAMME». With the
CHILD LOCK function, you can also programme a time period during which the TV or the programmes will be protected.
(Your children can not select the channel which you locked).

Press the MENU button  

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

Press the RED button 

to see the LOCK ALL Menu.

Use this option for protecting the access to the whole TV.

If you wish to block some specific programme, press the

YELLOW button 

and proceed to stage 5. - LOCK

PROGRAMME - on the next page.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select an option:

NONE: To cancel the protection.
ALWAYS: The access to the TV will be protected throughout the day.
TIMER: The access to the TV will be protected during the programmed
period.

If you have selected TIMER, press the Cursor UP/DOWN buttons

E

/

F 

to select:

Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons  

C 

/

I

.

Press the MENU button 

● 

to close the LOCK ALL Menu.