DOWNLOAD Sharp 56FW-53H (serv.man22) Service Manual ↓ Size: 1.49 MB | Pages: 12 in PDF or view online for FREE

6

L/S/G/I

R/D/D/D

AUDIO

S-VIDEO

VIDEO

Main Power On/Off Switch

Power Indicator

Program Selector (UP/DOWN)

Volume Buttons (UP/DOWN)

Remote Control Sensor

Sound Indicator

Remote Control Indicator

Door

Press the top of the door, opening it slightly
hook your finger inside and pull open.

9. Headphone Socket (3.5 mm 

ø

/ 16~600 B)

10. S-Video input terminal
11. Video Input Terminal (PAL/SECAM/NTSC)
12. Audio Input Terminal (left)
13. Audio Input Terminal (right)

21-pin Audio/Video (AV-2)
With PAL/SECAM/NTSC Video Input

21-pin Audio/Video (AV-1)
With PAL/SECAM/NTSC/S-Video Input 

21-pin Euro SCART (RGB) 
With PAL/SECAM/NTSC Video Input

Aerial terminal

1

2

3

4

5

6

7

8

7

STATION

REAL CHANNEL

FREQUENCY

SIGNALS

NUMBERS

MHZ

VHF

I-1 (A) ÷ I-9 (J)

CH-01 ÷ CH-09

45.75 ÷ 215.25

UHF

I-21 ÷ I-69

CH-21 ÷ CH-69

471.25 ÷ 855.25

C

M1/S1 ÷ M10/S10

CC-01 ÷ CC-10

105.25 ÷ 168.25

A

U-1/S-11 ÷ U-10/S-20

CC-11 ÷ CC-20

231.25 ÷ 294.25

T

S-21 ÷ S-41

CC-21 ÷ CC-41

303.25 ÷ 463.25

V

CC-42 ÷ CC-63

48 ÷ 304

CC-64 ÷ CC-68

69.25 ÷ 98.25

This TV memorizes the Mode last used when it was switched off. When the
main power button (

I

) is pressed to turn on the set, the power indicator will

light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.

When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (

B

l

TV) on the remote control, or one of the four buttons on the TV

( Va/\, VCH/\ ). The TV will change from Stand-by mode to Programme
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (

B

l

TV) again and the TV will return

to Stand-by mode.

If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati-
cally switch to Stand-by mode after 15 minutes.

Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme preset memory.

Power indicator

Main power button

8

Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.

Procedure:
1. Put batteries into the remote control and connect the antenna jack into the antenna input terminal at the rear of your

TV, as shown on pages 3 and 4.

2. Connect the TV power cable to a 220 ~ 240 V system.

3. Press the main power button (

I

), on the right hand side of the TV

set, to start the “AUTO INSTALLATION”.

4. The red power indicator will light.

5. The “AUTO INSTALLATION” message will appear on your TV

screen.

•

The TV is ready to preset automatically all local channels for you.

•

If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.

6. Now, press any button on the TV remote control and follow the

instructions on the screen, to start Auto Channel Preset.

Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.

Notes: This tuning process may take several minutes to perform.
If you need to repeat the “AUTO INSTALLATION”, please read TV
Channel Setting (page 28).

Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name with the available options:

a) Select programme to be edited.
b) Delete this programme.
c) go to sorting mode.
d) Edit this programme.
e) Exit.

For a more detailed explanation see page 9.
If you wish exit from the menu, press the BLUE button.

Automatic searching and sorting.
Press the menu button to cancel.

Power indicator

Main power button

9

Select programme to be edited.
Use this option to select a programme from the list. Each time you

press 

E

or

F

the memorised channel will be viewed and

will remain selected on the list by means of white background.

Delete this programme.
Use this option for cancelling programmes which are badly tuned
or repeated.

b.1 Select the programme (Pr) you wish to delete using Cursor 

UP/DOWN buttons 

E

/ 

F

(marked with white 

background).

b.2 Press the YELLOW button 

to see the “Delete Menu”.

When the YELLOW button 

is pressed, the TV will ask for

confirmation that you wish to cancel, and you must press the

YELLOW button 

again. The channels that follow it on the list

will automatically rearrange themselves by moving up one
programme (Pr) place, to restore the space of the cancelled
channel (CH).

Go to sorting mode
Use this option for sorting the channels (CH) into the desired
programme (Pr), as follows:

c.1 Select the programme (Pr) you wish to change using Cursor

UP/DOWN buttons 

E

/ 

F

(marked with white

background).

c.2 Press the GREEN button 

to see the “Sorting Menu”.

c.3 Press the Cursor UP/DOWN buttons 

E

/ 

F

to move the

channel (CH) to the required position.

c.4 Press the GREEN button 

to finish.

Edit this programme
Use this option for giving a name made up of four digits to the
channels or for changing the one which appears on some
channels, in the following way:

d.1 Select the channel using the Cursor UP/DOWN buttons

E

/ 

F

.

d.2 Press the RED button 

to see the “Edit Menu”.

d.3 Press the Cursor UP/DOWN buttons 

E

/ 

F

to change the

first letter. Letters A to Z of the alphabet, a blank space and the
numbers 0 to 9 will appear sequentially. Some of the broadcasting
stations names such as BBC1 or CH4 are already incorporated in
the TV and appear among the alphabet to make this task easier.

d.4 Press the

I

button for changing the position of the cursor and the

E

/ 

F

buttons for changing the letters (repeat this action

for other letters).

d.5 When you have finished the fourth letter, press the 

I

button to quit

the “Edit Menu” option.

Use this option to quit the menu by pressing the BLUE button 

.