Sharp 37VT-26H (serv.man6) User Manual / Operation Manual ▷ View online
3 7 V T- 2 6 H - c ; 9 9 / 7 / 2 6 / 1 8 : 0 0
G . K . A s s o c i a t e s , To k y o
31
Recording with the Timer
Example:
Programme Timer Setting
8:30
End
Recording
7:00
Start
Start
Recording
10:00
End
Recording
8:00
Start
Recording
10:00
End
Recording
8:30
Start
Start
Recording
Actual Timer Recording
8:30
End
Recording
7:00
Start
Start
Recording
8:00
PROGRAMME TIMER 1
PROGRAMME TIMER 2
PROGRAMME TIMER 1
PROGRAMME TIMER 2
VPS/PDC Recording
Video Programme System (VPS)/Programme Delivery Control (PDC) is an advanced system that allows you to record a
timer-set programme from the beginning to the end even if there is a change in actual broadcast time. The VPS/PDC signal
broadcast by the TV station controls the timer recording.
• This TELEVIDEO is equipped with a decoder that detects the VPS/PDC signal. Even if the actual programme time changes
timer-set programme from the beginning to the end even if there is a change in actual broadcast time. The VPS/PDC signal
broadcast by the TV station controls the timer recording.
• This TELEVIDEO is equipped with a decoder that detects the VPS/PDC signal. Even if the actual programme time changes
(e.g., the starting time is delayed, the programme time is extended, etc.), the set automatically and accurately records
only the timer-set programme. Also, even if the programme is interrupted (e.g., a special news bulletin during a movie),
the set automatically skips the interruption and records only the timer-set programme.
only the timer-set programme. Also, even if the programme is interrupted (e.g., a special news bulletin during a movie),
the set automatically skips the interruption and records only the timer-set programme.
• This TELEVIDEO can be set for VPS/PDC recording from 0:00 on the programme starting day and to 4:00 on the following
day.
• If the VPS/PDC recording is set for between 0:00 and 4:00, the set will be ready for VPS/PDC recording from 20:00 on the
previous day.
• If the VPS/PDC signal is not broadcast or if it is too weak to be detected, the set records according to the regular timer
settings.
19:00
news
21:00
19:00
soccer game
21:00
19:00
movie
21:00
19:30
21:30
19:00
21:30
19:00
Interruption
20:00 20:30
21:30
19:00 19:30
21:30
21:00
19:00
21:00 21:30
19:00
Not recorded
Not recorded
20:00
21:00 21:30
Not recorded
19:30
21:30
19:00
21:30
19:00
Skips interruption and
records entire movie
Records till end
Records till end
20:00 20:30
21:30
Example 1
Delayed Broadcast
Scheduled
Broadcast
(Timer setting)
Broadcast
(Timer setting)
Actual Broadcast
Timer Recording
without VPS/PDC
without VPS/PDC
Timer Recording
with VPS/PDC
with VPS/PDC
Example 2
Extended Broadcast
Example 3
Interrupted Broadcast
• VPS/PDC recording with this TELEVIDEO only works when the unit is set to standby mode.
• If two Programme timer settings overlap, the end recording time of PROGRAMME TIMER 1 will have priority over the start
recording time of PROGRAMME TIMER 2.
Overlapped sections
Not recorded
3 7 V T- 2 6 H - d ; 9 9 / 7 / 1 2 / 1 8 : 0 0
G . K . A s s o c i a t e s , To k y o
32
Confirming Timer Setting
A. To confirm the programme content:
Press the
CONFIRM
button.
The display disappears when you press the same
button again.
“ ” will be displayed next to the time when VPS/PDC
recording is set.
button again.
“ ” will be displayed next to the time when VPS/PDC
recording is set.
B. To add the programme content:
(1) Cancel the Timer setting by pressing the
TIMER
ON/OFF
button. (The Programme timer indicator
will go off.)
(2) Press the
CONFIRM
button.
(3) Press the j / k buttons to select “ADD”, and press
the
SET
button.
(4) To add a programme, follow steps @ to W of
“Setting the Programme Timer”
.
C. To change the programme content:
(1) Cancel the Timer setting by pressing the
TIMER
ON/OFF
button. (The Programme timer indicator
will go off.)
(2) Press the
CONFIRM
button.
(3) Press the j / k buttons to select “CHANGE”, and
press the
SET
button.
(4) Press the j / k buttons to select the programme
you wish to correct, and press the
SET
button.
To reset the programme, follow steps $ to W of
“Setting the Programme Timer”
.
Recording with the Timer
D A T E C H S T A R T S T O P
1 1 ( S U N ) 8 1 4 1 1 4 8
2 1 6 ( M O N ) 1 2 0 0 1 2 5 4
1 1 ( S U N ) 8 1 4 1 1 4 8
2 1 6 ( M O N ) 1 2 0 0 1 2 5 4
AV1
3 D A I L Y 4 0 1 0 3 0 1 0 4 5
P R O G R A M C O N F I R M A T I O N
A D D C H A N G E D E L E T E
:
A M
A M
S P
:
A M
:
A M
A M
:
:
:
:
:
S P
L P
L P
S E L E C T [ - / + ]
S E T [ S E T ]
S E T [ S E T ]
5
A M
4 M O N - F R I 1 1 1 5 2 1 5
:
P M
P M
S P
:
Programme timer indicator
D. To delete the programme content:
(1) Cancel the Timer setting by pressing the
TIMER
ON/OFF
button. (The Programme timer indicator
will go off.)
(2) Press the
CONFIRM
button.
(3) Press the j / k buttons to select “DELETE”, and
press the
SET
button.
(4) Press the j / k buttons to select the programme
you wish to delete, and press the
SET
button.
(5) Press the
CONFIRM
button to return to normal
screen.
• When the Programme timer is set (the Programme timer
indicator lights up in red), it is impossible to correct, add
or delete the programme content. To perform these op-
erations, press the
or delete the programme content. To perform these op-
erations, press the
TIMER ON/OFF
button to cancel the
Timer standby mode.
3 7 V T- 2 6 H - d ; 9 9 / 7 / 1 2 / 1 8 : 0 0
G . K . A s s o c i a t e s , To k y o
33
Sharp Super Picture
This function creates clearer modulation during
playback for high picture quality.
playback for high picture quality.
Press the
S. PICTURE
button on the set.
“S. PICTURE ON (or OFF)” will appear on the screen
for a few seconds. Each time the button is pressed,
the mode switches between ON and OFF. (The Sharp
Super Picture is preset to ON at the factory.)
for a few seconds. Each time the button is pressed,
the mode switches between ON and OFF. (The Sharp
Super Picture is preset to ON at the factory.)
S. PICTURE button
S . P I C T U R E O N
Normally leave the mode set to ON.
This high picture quality function
will create a clearer image during
playback.
This high picture quality function
will create a clearer image during
playback.
Set to OFF when playing back a
tape while editing or when strong
noise appears on the screen.
tape while editing or when strong
noise appears on the screen.
ON
OFF
2-Way Child-Proof Lock
Operation Mode Lock
• If the
(CHILD-PROOF LOCK)
button is pressed
during operation of this TELEVIDEO, the current op-
eration mode will not change until the Child-proof
lock is released, even if another operation button is
pressed.
eration mode will not change until the Child-proof
lock is released, even if another operation button is
pressed.
Power-Off Mode Lock
• If the
(CHILD-PROOF LOCK)
button is pressed
to engage the Child-proof lock while the
STANDBY/
ON
(
) button is set so that the power is off, power
will not be turned on even if the
STANDBY/ON
(
)
button is pressed.
Example:
Engaging the Child-proof lock during playback
! Press and hold down the
(CHILD-PROOF
LOCK)
button on the remote control for about
three seconds. The “
” Child-proof lock indica-
tor on the TELEVIDEO will flash, and then remain
lit to indicate that the lock is engaged.
lit to indicate that the lock is engaged.
• This function only operates during playback. It will not op-
erate when recording or watching a TV programme with
the set.
the set.
@ Now, regardless of what other operation buttons
are touched, the unit will continue to play the tape.
The Child-Proof Lock can be disengaged by the
following method:
following method:
• Press the
(CHILD-PROOF LOCK)
button on the
remote control for about three seconds. The “
”
Child-proof lock indicator on the TELEVIDEO will
flash (red), and then go out to indicate that the lock
is disengaged.
flash (red), and then go out to indicate that the lock
is disengaged.
3 7 V T- 2 6 H - d ; 9 9 / 7 / 1 2 / 1 8 : 0 0
G . K . A s s o c i a t e s , To k y o
34
This feature allows you to quickly locate a desired section of the tape. The DPSS feature uses index
signals search for specified tape segments and begins playback automatically.
signals search for specified tape segments and begins playback automatically.
Index Signal
An index signal is automatically recorded on the tape at the start of ordinary recording and timer record-
ing.
ing.
DPSS (Digital Programme Search System)
Example:
To play back the third programme after
the current one. (The third programme’s
index signal is used to find the starting
point.)
the current one. (The third programme’s
index signal is used to find the starting
point.)
! Load a tape containing index signals into the cas-
sette compartment.
@ Using the DPSS and buttons, select the num-
ber of index signals to be skipped in order to go
to the desired programme. With each press of the
button the number changes. One of up to 19
programmes can be selected in either direction
( : fast forward, : reverse). In this example,
press the button three times to display “3”.
to the desired programme. With each press of the
button the number changes. One of up to 19
programmes can be selected in either direction
( : fast forward, : reverse). In this example,
press the button three times to display “3”.
# Search starts immediately after you have released
the button. (When an index signal is located, the
displayed number will decrease.)
displayed number will decrease.)
1
–1
2
3
Index signals
Fast Forward
Rewind
Current tape position
0 : 0 0 . 0 0 1 0 : 1 0 A M
D P S S 2
$ When the specified index signal–marked section
is found, playback will begin automatically.
• DPSS may not function properly if the index signals are
too close together (within about five minutes of each other).
• DPSS can be cancelled by pressing the
PLAY
or
STOP
button.
• If the tape reaches its end or is rewound completely be-
fore locating the desired index signal, DPSS will be can-
celled.
celled.
• DPSS may not function for damaged or worn tapes.
• This function cannot be used with tapes that contain no
• This function cannot be used with tapes that contain no
index signals.
• The starting point of a programme may vary slightly.
• DPSS will not operate during Fast forwarding, Rewinding,
• DPSS will not operate during Fast forwarding, Rewinding,
Recording, Timer standby, and Timer recording modes,
or when there is no tape in the cassette compartment.
or when there is no tape in the cassette compartment.
0 : 0 0 . 0 0 1 0 : 1 0 A M
D P S S 3
Click on the first or last page to see other 37VT-26H (serv.man6) service manuals if exist.