DOWNLOAD Sharp 32LF-92H (serv.man3) Service Manual ↓ Size: 1.87 MB | Pages: 29 in PDF or view online for FREE

- 16 -

Other  Features

Sound Mute

To cut off the sound from the TV press “ ” button. To restore
the sound press the “ ” button again or use the “

 +” or “-

 ” buttons, in this case the volume will start from minimum

setting.

Stereo / Bilingual

• If the TV channel you are watching broadcasts in two lan-

guages (e.g. Eurosport), you can select the dubbed or the

original language, pressing the “I-II” button.

•  When  the  stereo  broadcast  is  received  poorly,  you  can

change from stereo to mono sound so that you can hear

the broadcast more clearly and easily.

Information on Screen

First  pressing  the  “

”  button  displays  the  current  status

“Programme  number”,“Station  name”  and  “Sound

mode”.

To Display the Time

• While watching a TV programme with Teletext transmission

press “

“ button. The current time information, captured

from Teletext will be displayed at the upper right corner of

the screen.

•  If  the  programme  being  watched  does  not  have Teletext

transmission, no time information will be displayed.

• The time information will disappear after pressing “

“ but-

ton again.

Flash back (  )

This button is used to return to the previous viewed preset.
By pressing the " " button repeatedly it is possible to tog-
gle between two presets.

Teletext

Teletext is an information system that displays text on your

TV screen. Using the Teletext information system you can

view a page of information on a subject that is available in the

list of contents (index).
No on screen display will be available in text mode.
No contrast, brightness or colour control, but volume control

is available in text mode.

To operate Teletext

• Select a TV station on which Teletext is being transmitted.
• Press (TELETEXT) “

” button. Usually the list of contents

(index) is displayed on the screen.

To select a page of Teletext

• Press the appropriate digit buttons for the required Teletext

page number.

The selected page number is displayed at the top left corner

of the screen. The Teletext page counter searches until the

selected page number is located, so that the desired page is

displayed on the screen.
• Press “ ” button  to move the Teletext screen forward one

page at a time.

• Press “ ” button  to move the Teletext screen backward

one page at a time.

To Select Index Page

• To  select  the  page  number  of  the  index  (generally  page

100), press “

“ button.

To Select Teletext with a TV Programme

• Press “

“ button. The text is now superimposed over the

programme on the screen.

• Press “ “ button again to return to the Teletext page.

Searching for a page while watching TV

• To search for a specific page whilst viewing the TV picture,

whilst  viewing  teletext  enter  the  desired  Page  number,
then press the 

“ button will restore the TV picture. Once

the desired page is found the Header of this page will ap-
pear on the screen. Press the “

“ button to view the full

page.

To Select Double Height Text

• Press “

“ button for the top half of the information page to

be displayed in double height text.

• Press “

“ button again for the bottom half of the informa-

tion page to be displayed in double height text.

•  Press  “

“button  once  more  for  the  full  page  of  normal

height text.

To Reveal “concealed” Information

• Pressing “

“ button once will reveal answers on a quiz or

games page.

• Pressing “

“ button again will conceal the revealed an-

swers.

To Stop Automatic Page Change

The teletext page you have selected may contain more infor-

mation than can be displayed on one screen, in such cases

the page will uptade periodically.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-2.p65

21.01.2004, 08:29

16

- 17 -

• Press “ “ button to stop the automatic page change.
• Press “

“ button again to allow the next page to be dis-

played.

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that

can only be displayed on the screen one section at a time.
• Select the required Teletext page.
• Press “

“ button.

• Select the required subcode page number by pressing four

digit buttons (e.g. 0001).

•  If  the  selected  subcode  page  is  not  displayed  in  a  short

time, press “

“ button. TV programme will be displayed on

the screen.

• Teletext page number will be displayed on the upper left

corner of the screen when the selected page is found.

• Press “ “button to display the selected Teletext page.

Fastext

Teletext mode will be selected according to transmission au-

tomatically.
Your TV  supports  the  7  page Teletext  system.  When  the

page number of any of the 7 pages in memory is entered, the

system will not search for the requested page; instead it will

display the page automatically.
• Press “ ” button  to move the Teletext screen forward one

page at a time.

• Press “ ” button  to move the Teletext screen backward

one page at a time.

For Fastext

The subject-heading for the information may have a particular

colour or can be in a form located in a coloured box.
• Press an appropriate RED, GREEN, YELLOW or BLUE but-

ton in order to reach the relevant page quickly.

To exit Teletext

• Press “

79

” button. The screen will switch to TV mode.

Connecting  external  equipment

Via the Euro connector

You TV set has two euro connector sockets. If you wish to

connect  external  equipment  (e.g.  video  recorder,  decoder,

etc.) which have Euro connectors, to your TV, use the EXT.1

(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euro connector sockets

the TV will be switched to AV mode automatically.

RGB mode

If a piece of equipment outputs RGB signals use the EXT-1

Euro connector as this is RGB ready.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has

the RCA jacks, connect it to the Front AV (F-AV) terminal

with the video and audio cables.
• If the equipment has the mono audio jack, connect it to the

AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA

jacks, connect it to the TV with an aerial cable. For details,

see the manual provided with the equipment.
• To  store  the  test  signal  that  comes  from  the  equipment,

see “INSTALL. Menu” on page 14 and store it to the pro-

gramme number 0. You can watch images from that equip-

ment to select the programme number which you stored the

test signal.

TV and Video Recoder (VCR)

•  Connect  the  Video  Recorder  to  the ANT  (antenna  input)

socket of the TV with the aerial cable.

• Connect the Video Recorder to the EXT.1 or EXT.2 terminal

with the SCART cable, or connect it to the Front AV (F-AV)

terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press
“

(;7

” button to select the corresponding AV mode.

NTSC  3.58/4.43  system  is  detected  automatically  in AV

mode.

Copy Facility

You can output the video and audio signals which inputs from

TV or EXT.1 (EXT-1) terminal to the video recorder connected

to the EXT.2 (EXT-2) terminal.
•  To  select  the  output  source,  see  “Setting  External

Source Output” on page 13.

To connect to S-VHS input

Connect your camera or camcorder at the front or back side

of your TV.
• Connect your equipment to the TV via S-VHS input and au-

dio inputs of F-AV inputs by using S-VHS cables.

Connecting Headphones

Use  the  stereo  headphone  socket  of  your TV,  to  connect

headphones.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-2.p65

21.01.2004, 08:29

17

- 18 -

Connecting  external  equipment

Before connecting anything
• Switch off all equipment.
• Read the manuals provided with the equipments.
To select an AV mode

Pressing “

(;7

” button on the remote control selects one of  AV modes (EXT-1, RGB, EXT-2, F-AV, SVHS)

• To return to the TV mode, repeatedly press “

(;7

”

 

button.

EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)
• Video input, Audio L/R inputs and RGB inputs are available.
• TV broadcast outputs (Video and Audio L/R) are available.
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)
• V

ideo input and Audio L/R 

inputs are available.

• Video and Audio L/R outputs are available. (see “Setting External Source Output” on page 13.)
Front AV (F-AV) terminal: RCA connectors x 

3 and S-VIDEO (Y/C) connector

• Video input and Audio L/R inputs 

are available

.

• S-VIDEO  input is available.

(;7

(;7

$QWHQQD

(;7

(;7

9LGHR,QSXW

7HUPLQDO

$XGLR,QSXW

7HUPLQDO

)5217$9

)$9

+HDGSKRQH

&+

69,'(2 9,'(2 /6*,5'''

$8',2

69+6

$17,1

'HFRGHU

&DPFRUGHU

$XGLR

+HDGSKRQH

)RU6DWHOOLWH5HFHLYHU

9LGHR

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-2.p65

21.01.2004, 08:29

18

- 19 -

Typical  Connections

Note: For further details, please refer to operation manual of your VCR.

$HULDOFRQQHFWLRQ79VHWRQO\

$HULDO,1

%$&.2)79

$HULDO

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

$17

(;7

(;7

$1 7

( ;7 

(;7 

$HULDO&RQQHFWLRQV79DQG9&5

$HULDO

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

$17

(;7

(;7

$HULDO/HDG

1RWVXSSOLHG

6FDUW/HDG

1RWVXSSOLHG

%$&.2)79

$HULDO,1

%$&.2)9&5

$XGLR9LGHR

5)287

$97(50,1$/

$9

$HULDO,1

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-2.p65

21.01.2004, 08:29

19