DOWNLOAD Sharp 32LF-92H (serv.man3) Service Manual ↓ Size: 1.87 MB | Pages: 29 in PDF or view online for FREE

- 12 -

Setting Hue (In AV mode only) :

• Using “ ” or “ ” button select Hue.
• Press “ ” button to increase Hue level.
• Press “ ”  button to decrease Hue level.

Hue adjust is functional only when NTSC 3.58/4.43 is applied in

AV mode. It does not appear when other colour systems used.

%5,*+71(66

&2175$67

&2/285

6+$531(66

7,/7

+8(

3,&785(02'(

0$18$/

Picture Mode

This item is used to change the picture mode. By pressing
“ ”  or  “ ”  button  you  may  choose  one  of  these  options:

BRIGHT, STANDARD, SOFT, MANUAL.

%5,*+71(66

&2175$67

&2/285

6+$531(66

7,/7

3,&785(02'(

&2/2857(03

0$18$/

1250$/

Colour Temp

• Using “ ” or “ ” button select  Colour Temp.
This  item  is  used  to  change  the  Colour Temperature.  By
pressing “ ” or “ ” button you may choose one of these op-

tions: COOL, WARM, NORMAL.

%5,*+71(66

&2175$67

&2/285

6+$531(66

7,/7

3,&785(02'(

&2/2857(03

0$18$/

1250$/

Wide Mode :

• Using “ ” or “ ” button select Wide Mode.
With  this  item  you  can  select  the  width  of  the  picture.  By
pressing “ ” or “ ” button you may choose one of these op-

tions : AUTO, NORMAL, ZOOM 14:9, CINEMA, 16:9ZOOM S

or FULL.
Wide mode can be set by “

” wide mode button also.

&2175$67

&2/285

6+$531(66

7,/7

3,&785(02'(

&2/2857(03

:,'(02'(

0$18$/

1250$/

$872

Each time you press the wide mode button “

”, the width

of the picture changes as indicated:

$872 1250$/=220&,1(0$=2206)8//

When you select ZOOM 14:9 or CINEMA, you can  change

the vertical scroll by pressing  “ ” / “ ”.
* Auto mode (VPS code): The VPS signal is sent by some

broadcasting stations with information of the original size.

 When the TV is in AUTO mode and receives the VPS sig-

nal, it changes the size automatically as indicated below:

When  the  TV  is  receiving  VPS  code  16:9  the  TV  selects

CINEMA automatically.

When  the  TV  is  receiving  VPS  code  14:9  the  TV  selects

ZOOM 14:9 automatically.

When  the  TV  is  receiving  VPS  code  4:3  the  TV  selects

NORMAL automatically.

When the TV does NOT receive VPS code the TV selects

FULL automatically.
External  source:  When  you  are  watching  the  TV  set

through the Euro-SCART AV-1 terminal and it receives infor-

mation of 16:9 format (through the audio-video control pin)

the TV selects FULL automatically.

Wide Mode (Special detail information)

Special  detail  information  about  FULL,  NORMAL,  ZOOM

14:9, CINEMA (16:9) and 16:9ZOOM S.
FULL
With Full Mode you adapt the picture 16:9 format while also

stretching the centre of view. This is an advantage, for exam-

ple, when watching sports games where there is no real fixed

centre of the picture.

NORMAL
You can watch 4:3 programs in 4:3 format by switching to

NORMAL Mode function.

ZOOM 14:9 
Adapts the 14:9 broadcast cinema movies to the 14:9 Mode.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28

12

- 13 -

CINEMA (16:9) 
Adapts the 16:9 broadcast cinema movies to the 16:9 Mode,

thereby getting rid of the black borders.

16:9ZOOM S 
Adapts up to the wide picture (16:9 aspect ratio) with subtitle

to the full screen.

68%7,7/(

Adjusting the visible area of the picture:
If subtitles or the top (or bottom) of the picture are cut off,

you can adjust the visible area of the picture manually.
1. Press Wide mode “

” button once.

The WIDE MODE  indicator appears. The WIDE MODE

will not be changed.

2. While it is displayed, press “ ” or “ ” to change the po-

sition of the picture.

$872

)8//

=220

1250$/

&,1(0$

=2206

•You cannot adjust the visible area in NORMAL or FULL mode.

To Store the Settings

• Press “ ” or “ ” button on “STORE” option to store Picture

menu settings or press “OK” button.

&2/285

6+$531(66

7,/7

3,&785(02'(

&2/2857(03

:,'(02'(

6725(

0$18$/

1250$/

$872

Auto Store:

Wide mode is stored automatically.

Feature Menu

• Press  “M”  button, now you are in main menu. In the main

menu, select FEATURE, using “ ” or “ ” button. Then enter
the feature menu pressing “ ” or “ ”  button.

6281'
3,&785(
)($785(
,167$//
352*5$0

Sleep Timer

The sleep timer is used to turn the TV off after a defined peri-
od. Press “ ” or “ ” button to choose a period of time after

selecting this item. The timer can be programmed between

Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020,

030, 040, ......... ,120.)
If sleep timer is activated, at the end of the selected the time,

the TV goes automatically to stand-by mode.

6/((37,0(5

&+,/'/2&.

/$1*8$*(

(;7287387

%/8(%$&.*5281'

2))

2))

(1*/,6+

79

21

Child lock:

You can disable the control panel buttons (except the POW-

ER button) with this item.
Press “ ” or “ ” button to change the setting to On or Off af-

ter selecting this item.
When you set this item to On, the TV can be operated only

by using the remote control handset.

6/((37,0(5

&+,/'/2&.

/$1*8$*(

(;7287387

%/8(%$&.*5281'

2))

2))

(1*/,6+

79

21

Language:

Menu Language can be selected by pressing “ ” or “ ” but-

ton on Language item.

6/((37,0(5

&+,/'/2&.

/$1*8$*(

(;7287387

%/8(%$&.*5281'

2))

2))

(1*/,6+

79

21

Setting External Source Output

• You  can  use  this  menu  to  select  the  internal  or  external

source that will be output at EXT-2 terminal.

• In the “Feature” menu select “EXT-2 Output” using “ ” or

“ ” button. Then select the source you want to be output
at EXT.2 pressing “ ” or “ ” button (one of the sources: TV,

EXT-1, F-AV.

6/((37,0(5

&+,/'/2&.

/$1*8$*(

(;7287387

%/8(%$&.*5281'

2))

2))

(1*/,6+

79

21

Blue Background During No-Signal

The Blue Background feature can be set by “ ” or “ ” but-

ton to either On or Off.

6/((37,0(5

&+,/'/2&.

/$1*8$*(

(;7287387

%/8(%$&.*5281'

2))

2))

(1*/,6+

79

21

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28

13

- 14 -

INSTALL. (Installation) Menu

You can store a channel manually, or modify the current set-

tings of a channel (for example, fine-tuning a channel).

You can also change the colour system.

• Press “M” button to display the main menu.
• Press “ ” or “ ” button to select “INSTALL.” item. Then

“ ” or “ ” button to display the “INSTALL.” menu.

6281'
3,&785(
)($785(
,167$//
352*5$0

Note:
• If you want to modify the current settings of a channel, se-

lect the channel of which you want to modify the setting.

Then display the main menu on screen.

• In AV mode, you can change only the “COLOUR SYSTEM”

item.

1. PROGRAMME is the first selected item as you enter the

INSTALL. menu. Press the “ ” or “ ” button to select the

programme number where you want the tuned channel to

be stored. (You may also type the programme number us-

ing the digit buttons)

Note:
•  Do  not  use  the  PROGRAMME  item  when  you  want  to

modify the current programme number setting as this may

cause other programmes to be changed that are in the ex-

isting programme number.

2. Press “ ” or “ ” button to select Tuning Mode. By press-

ing “ ” or “ ” button , you can select the mode in which

you  want  the  search  to  be  made,  "Channel  Search"

mode or "Frequency Search" mode.

• When you select "Channel Search" ("Channel" will be

displayed  in  the  menu.),  the  display  of  the

INSTALL.(Installation) Menu will be as below :

352*5$00(

781,1*02'(

%$1'

&+$11(/

&2/2856<67(0

),1(781,1*

6($5&+

3

&+$11(/

6

3$/

3. Press “ ” or “ ” button to select BAND. Using “ ” or “ ”

button to select the band in which you want to search a

channel.

4. Press “ ” or “ ” button to select SEARCH. Press “ ” or

“ ” button to start searching. (Press “ ” button to search
forward. Press “ ”  to search backwards.)

• If the found channel is not the desired one, press “ ” or

“ ” button to start searching again.

• To stop searching before a channel is found, press the

reverse direction button. For example, when the TV is
searching forward with “ ” button, press “ ” button to

stop searching.

• If you know the channel number which you want to find,

you can find the channel directly. Follow the step 5 to

select the correct standard, then press “ ” or “ ” to

select CHANNEL again, and press“ ” or “ ” button to

select the channel number, or enter the number with the

digit buttons.

5. If the picture is not clear or no colour appears, change the

colour system to display the picture normally. Press “ ”
or “ ” button to select COLOUR SYSTEM, then press “ ”
or “ ” button to choose the correct one.

• In TV mode: PAL / SECAM
•  In AV  mode:  AUTO  /  PAL  /  SECAM  /  NTSC  3.58  /

NTSC 4.43

6. If  the  channel  reception  is  poor,  fine-tune  the  channel.

Press “ ” or “ ” to select FINE TUNING, then press “ ”
or “ ” button to fine-tune the channel.

7. After  the  all  settings  are  completed,  store  the  new

channel’s setting to the programme number which you se-

lected.  Press  “ ”  or  “ ”  to  select  STORE,  then  press
“ ” or “ ” button to store it.

781,1*02'(

%$1'

&+$11(/

&2/2856<67(0

),1(781,1*

6($5&+

6725(

&+$11(/

6

3$/

8. When you select "Frequency Search" , the display of the

Tuning  menu will be as below :

352*5$00(

781,1*02'(

&2/2856<67(0

)5(48(1&<

6($5&+

6725(

3

)5(48(1&<

3$/

• As  "Frequency    Search"  is  selected, TV  will  search  ac-

cording to the channel frequencies.

• With the“ ” or “ ” button, select Search. Search can be

made  either  forward,  pressing  “ ”  button  or  backwards,
pressing “ ” button.

•  The  search  will  be  done  with  steps  of  0.25MHz.  in  each

step.

• If the tuned station is not the desired one, you can continue

searching pressing “ ” or “ ” button again.

•  When  the  desired  station  is  tuned,  select  STORE  using

“ ” or “ ” button and store it to the programme number
you selected pressing “ ” or “ ” button or press “OK” but-

ton.

• Now as you had selected the Frequency Search, the tuning

mode of the program is stored as Frequency Search Mode.

Direct Frequency Access

• If you know the  broadcast band and the channel frequency

of the station you want to tune, you do not need to make

search; select Frequency,  using “ ” or “ ” button in the

Frequency Mode Tuning Menu. You can type the first 3 dig-

its of the frequency using the digit buttons, and then you
can select the decimal part of the frequency by using “ ” or
“ ” buttons with 250kHz steps. For example if you want to

tune the station at frequency 224.25 MHz; first you can di-

rectly type 224. The bar at bottom of the menu will show

224.00 . Then by increasing or decreasing with 0.25 MHz
steps  using  “ ”  or  “ ”  buttons,  you  can  select  the

224.25MHz .When you type and select the frequency, the

corresponding station will be displayed.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28

14

- 15 -

• To store the station to the programme number selected, se-

lect STORE option using “ ” or “ ” button and then press
“ ” or “ ” button or press “OK” button.

• Now as you had selected the Frequency Search, the tuning

mode of the program is stored as Frequency Search Mode.

Note : Channel Search Tuning Mode uses a channel table.

The channels and stations at the table may vary from table to

table and from country to country. Each channel has an ex-

act frequency on the table.
• Frequency Search Tuning Mode does not use a channel

table and it is slower than Channel Search Tuning  Mode.

•  Channel  Search  Tuning    Mode  is  recommended  for  the

countries which uses standard channel table.

•  Frequency  Search  Tuning  Mode  recommended  for  the

countries which uses non-standard channel table.

Program. (Programming) Menu

You can use the Program. (Programming) menu to delete a

channel, to change the programme number of a channel, to

give  a  channel  name  to  a  channel,  and  to  start  the A.P.S

(AUTOSTORE) function.
• Press “M” button to display the main menu.
• Press “ ” or “ ” button to select “PROGRAM.” item, then

“ ” or “ ” button to display the “PROGRAM.” menu.

$8726725(

,16(57

'(/(7(

1$0(

&

&

&

&

&

&

To choose a channel in the PROGRAM. menu:

• Press “ ” / “ ”/ “ ” / “ ” button. The programme number

that  you  choose  is  high-lighted  in  the  PROGRAM.  menu

and you can view the picture of that channel.

Caution:
Using the DELETE or INSERT function it is possible to re-

write the current channel list in the PROGRAM menu. This

can cause other channels to be changed if they were former-

ly in locations affected by this function.

To give a channel name (NAME):

1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press “ ” or “ ” button to choose the position, and press

“ ” or “ ” button to choose each character of channel

name.

4. Press the RED button to store the channel name.

• To cancel the NAME mode, press the BLUE button.

To delete a channel (DELETE):

1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.

• To cancel this DELETE mode, press the BLUE button.

To change the programme number of a channel

(INSERT):

1. Choose the channel you want to change the programme

number.

2. Press the GREEN button to enter the INSERT mode.
3. Press  “ ”  /  “ ”/  “ ”  /  “ ”  button  to  choose  new

programme number.

4. Press the GREEN button to insert the channel to the cho-

sen programme number.

• To cancel this INSERT mode, press the BLUE button.

To start A.P.S (AUTOSTORE)

A.P.S. automatically programmes the received channels in

your TV’s programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.

A warning message appears.

$// 35(6725(' 352*5$00(6

:,// %( (5$6('

&28175<

781,1*02'(

&217,18(

79&$1&(/

8.

&+$11(/

• To cancel the AUTOSTORE mode, press the “

” but-

ton.

2. Press “ ” or “ ” button to choose the “COUNTRY”, then

press “ ” or “ ” button the choose country you are now lo-

cated.

3. By pressing the up and down buttons, come to the Tuning

Mode item and select the mode at which your TV will run

the APS.

4. Press “ ” or “ ” button to choose the “CONTINUE”, then

press “ ” button to start A.P.S. The following message ap-

pears.

$36 ,6 5811,1*

3/($6( :$,7

79  &$1&(/

• To cancel the A.P.S., press the “

” button.

5. After A.P.S. is finalized, the PROGRAM. menu appears

again.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28

15