DOWNLOAD Sharp 32KF-84H (serv.man2) Service Manual ↓ Size: 58.62 KB | Pages: 1 in PDF or view online for FREE

•

White Level

Set brightness control to get total picture tube cathode current of 600 

µ

A under no signal condition.

Maximum necessary correction of each picture tube cathode current to get 8950 degrees

 

K-20 MPCD

screen temperature should not exceed 15% of its original value.

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.

•

Focus ................. High Bipotencial Electrostatic

•

Sweep Deflection ............................. Magnetic

•

Picture Intermediate frequency .......... 38.9MHz

•

Sound  Carrier Trap ........................... 32.9MHz

•

Adjacent Sound Carrier Trap ............. 40.9MHz

•

Adjacent  Picture  Carrier Trap ........... 30.9MHz

•

Aerial Input Impedance

VHF/UHF ................. 75 ohm Unbalanced

•

Tuning Ranges ..... 45.75MHz thru 855.25 MHz

VHF: IR A - J / CC01-CC68 (Hiperband)
UHF: I21 - I69 CH

Specifications are subject to change without prior notice.

•

Power Input .................... 220V-240 Volts AC 50Hz

•

Power Consumption

Normal Operation (Method IEC60107) ...............110W
Stand-by Operation ..........................................1.5W

•

Audio Power Output Rating (MPO) / Impedance

Internal Left Speaker ................................. 10W, 7

Ω

Internal Right Speaker ............................... 10W, 7

Ω

•

Speakers

Left / Right ................................................. 12 x 6cm

•

Convergence (Maximum Misconvergence)

Static (Centre) between any two colours  ... 0.03 cm
Dynamic after static equals zero

Within 32 x 17.4 cm rectangle ........... 0.13 cm
64 x 34.8 cm rectangle........................ 0.15 cm

Everywhere else .......................................... 0.18 cm