DOWNLOAD Sharp 28LW-92H (serv.man9) Service Manual ↓ Size: 1.87 MB | Pages: 27 in PDF or view online for FREE

- 17 -

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that

can only be displayed on the screen one section at a time.
• Select the required Teletext page.
• Press “

“ button.

• Select the required subcode page number by pressing four

digit buttons (e.g. 0001).

•  If  the  selected  subcode  page  is  not  displayed  in  a  short

time, press “ “ button. TV programme will be displayed on

the screen.

• Teletext page number will be displayed on the upper left

corner of the screen when the selected page is found.

• Press “

“button to display the selected Teletext page.

Fastext

Teletext mode will be selected according to transmission au-

tomatically.
Your TV  supports  the  7  page Teletext  system.  When  the

page number of any of the 7 pages in memory is entered, the

system will not search for the requested page; instead it will

display the page automatically.
• Press “ ” button  to move the Teletext screen forward one

page at a time.

• Press “ ” button  to move the Teletext screen backward

one page at a time.

For Fastext

The subject-heading for the information may have a particular

colour or can be in a form located in a coloured box.
• Press an appropriate RED, GREEN, YELLOW or BLUE but-

ton in order to reach the relevant page quickly.

To exit Teletext

• Press “

79

” button. The screen will switch to TV mode.

Connecting  external  equipment

Via the Euro connector

Your TV set has two euro connector sockets. If you wish to

connect  external  equipment

  (e.g.  video  recorder,  decoder,

etc.) which have Euro connectors, to your TV, use the EXT.1

(EXT-1) or EXT.2 (EXT-2) terminals.

If an external device is connected via Euro connector sockets

the TV will be switched to AV mode automatically.

RGB mode

If a piece of equipment outputs RGB signals use the EXT-1

Euro connector as this is RGB ready.

EXT-2S Mode

If the equipment connected to your TV set supports S-Video

(Y/C) output from Euroconnector, you can have a better pic-

ture quality by selecting EXT-2S mode and connecting your

equipment to the EXT.2 (EXT-2S) terminal of TV. See your

equipment's  booklet  to  check  if  your  equipment  has  such

feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has

the RCA jacks, connect it to the Front AV (F-AV) terminal

with the video and audio cables.
• If the equipment has the mono audio jack, connect it to the

AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA

jacks, connect it to the TV with an aerial cable. For details,

see the manual provided with the equipment.
• To  store  the  test  signal  that  comes  from  the  equipment,

see “INSTALL. Menu” on page 13 and store it to the pro-

gramme number 0. You can watch images from that equip-

ment to select the programme number which you stored the

test signal.

TV and Video Recoder (VCR)

•  Connect  the  Video  Recorder  to  the ANT  (antenna  input)

socket of the TV with the aerial cable.

• Connect the Video Recorder to the EXT.1 or EXT.2 terminal

with the SCART cable, or connect it to the Front AV (F-AV)

terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press
“

(;7

” button to select the corresponding AV mode.

NTSC  3.58/4.43  system  is  detected  automatically  in AV

mode.

Copy Facility

You can output the video and audio signals which inputs from

TV or EXT.1 (EXT-1) terminal to the video recorder connected

to the EXT.2 (EXT-2) terminal.
• To select the output source, see “Setting External Source

Output” on page 13.

Connecting Headphones

Use  the  stereo  headphone  socket  of  your  TV,  to  connect

headphones.

ENG-2842W-3242W-AK45-SHARP -1548 UK-TV-2.p65

30.10.2003, 13:46

17

- 18 -

Connecting  external  equipment

Before connecting anything
• 

Switch off all equipment.

• Read the manuals provided with the equipments.
To select an AV mode

Pressing “

(;7

” button on the remote control selects one of six AV modes (EXT-1, RGB, EXT-2, EXT-2S, F-AV)

• To return to the TV mode, repeatedly press “

(;7

”

 

button.

EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)
• Video input, Audio L/R inputs and RGB inputs are available.
• TV broadcast outputs (Video and Audio L/R) are available.
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
• Video and Audio L/R outputs are available. (see “Setting External Source Output” on page 13.)
Front AV (F-AV) terminal: RCA connectors x 3
• Video input and Audio L/R inputs are available.

(;7

(;7

$QWHQQD

(;7

(;7

/

5

9LGHR,QSXW

7HUPLQDO

$XGLR,QSXW

7HUPLQDO

)5217$9

)$9

+HDGSKRQH

$17,1

'HFRGHU

&DPFRUGHU

$XGLR

+HDGSKRQH

)RU6DWHOOLWH5HFHLYHU

9LGHR

ENG-2842W-3242W-AK45-SHARP -1548 UK-TV-2.p65

30.10.2003, 13:46

18

- 19 -

Typical  Connections

Note: For further details, please refer to operation manual of your VCR.

$HULDOFRQQHFWLRQ79VHWRQO\

$HULDO,1

%$&.2)79

$HULDO

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

&21752/

$17

(;7

(;7

$HULDO&RQQHFWLRQV79DQG9&5

$HULDO

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

&21752/

$17

(;7

(;7

$HULDO/HDG

1RWVXSSOLHG

6FDUW/HDG

1RWVXSSOLHG

%$&.2)79

$HULDO,1

%$&.2)9&5

$XGLR9LGHR

5)287

$97(50,1$/

$9

$HULDO,1

ENG-2842W-3242W-AK45-SHARP -1548 UK-TV-2.p65

30.10.2003, 13:46

19

- 20 -

Typical  Connections  (Continued)

Note: For further details, please refer to operation manuals of your DVD Player, DECODER and VCR.

&RQQHFWLRQV79'9'3OD\HU'(&2'(5DQG9&59LGHRUHFRUGHU

$97(50,1$/

$9

%$&.2)79

'9'3/$<(5

'(&2'(5

6FDUW/HDG

1RWVXSSOLHG

6FDUW/HDG

1RWVXSSOLHG

$97(50,1$/

$9

$HULDO,1

6FDUW/HDG

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

$HULDO

1RWVXSSOLHG

$HULDO/HDG

1RWVXSSOLHG

$HULDO,1

$XGLR9LGHR

%$&.2)9&5

5)287

ENG-2842W-3242W-AK45-SHARP -1548 UK-TV-2.p65

30.10.2003, 13:46

20