DOWNLOAD Sharp 15JF-26H (serv.man18) Service Manual ↓ Size: 924.43 KB | Pages: 30 in PDF or view online for FREE

Before using the TV set for the first time, install the supplied dry batteries in the remote control.

• Remove batteries if weak or if the TV set is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.

#

Close the battery cover.

!

With your thumbnail, pull up
the slit as indicated by the
arrow to remove the battery
cover.

@

Insert two batteries 1.5 V (size
“AA”). Be sure to match the
battery 

/

 terminals with

the 

/

 marks inside the

compartment.

Safety Precautions ............ 3
Accessories ....................... 4
Remote Control

Battery Installation ........ 4

Aerial Connecitons ............ 5
Typical Connections .......... 5
Location of Controls .......... 6

Initial Setting/

Auto Tuning ................... 7

After Initial Setting/

Auto Tuning .................. 7

Manual Tuning ................... 8
Fine Tuning ...................... 10
Skipping Programmes ..... 11
Manual Channel Sorting .. 13
Channel Sorting

(Delete) ....................... 14

Watching a TV Programme .. 15

Picture Adjustment .......... 16
Timer Setting ................... 17
Child Lock

(Channel Block) .......... 19

Flashback, Sound Mute ..... 22
TV/VIDEO, Call .................. 23
Teletext Mode .................. 24

Troubleshooting ............... 27
Specifications .................. 28

Please read this operation manual carefully

before using the colour television.

75-ohm coaxial cable (round cable)

• To enjoy a clearer picture, we recommend that you use an outdoor aerial. The following is a brief

explanation of the types of connection that are used for coaxial:

Aerial Lead: Connect the cable from the aerial to a
standard DIN45325 plug (IEC169-2) and plug it
into the aerial terminal at the back of the TV set.

SCART

PERITELEVISION

Rear  of  TV

SCAR

T

PERITELEVISION

SCART-terminal

Aerial terminal

Enjoy the stunning visuals of a VCR or DECODER by connecting them to this TV set through its Euro-
SCART 21-Pin terminal.
Please refer to the Operation Manual of your VCR for details.

SCAR

T

PERITELEVISIO

N

LINE 2 IN/DECODER

LINE 1 IN/OUT

TEST SIG

ON

OFF

CHANNEL

ANTENNA IN

RF OUT

Back of VCR

Rear of TV

SCART Terminal

Aerial IN

Aerial Lead
(not supplied)

Aerial Lead
(not supplied)

Aerial Lead
(not supplied)

Antenna in

RF Out

SCART Lead 
(not supplied)

Outdoor aerial
(not supplied)

Power (    ) button

Power/On Timer indicator

Remote Control Sensor

Menu button

Earphone Jack
3.5 mm ø Jack PLUG 
Earphone impedance
16 ~ 600 ohm

Volume Up (     )/Down (     ) buttons

Channel Up (     )/Down (     ) buttons

VIDEO input terminal

AUDIO input terminal

CALL (    )/CHILD LOCK (    ) button                       ~

Aim this window at the infrared sensor 
on your TV set

FLASHBACK (     ) button

Returns to previously viewed 
programme

23

TV/VIDEO Select button

23

19

21

SOUND MUTE (     ) button

22

POWER/STANDBY (      ) button

15

Programme Select buttons

15

REVEAL (     ) button (Teletext)

25

HALF PAGE (     ) button (Teletext)

25

22

CLOCK (     ) button (Teletext)

25

VOLUME UP (     )/DOWN (     ) button

(     ) Increases sound 
(     ) Decreases sound 
(These are also used for menu setup)

15

CANCEL (     ) button (Teletext)

25

RESET (     ) button (Teletext)

25

Single/Double Entry button (       )

15

Text/Mix/Picture (                    ) Select 
button (Teletext)

24

~           COLOURED buttons

24

25

~           LIST Select button (Teletext)

25

26

25

26

INDEX (     ) button (Teletext)

25

HOLD (     ) button (Teletext)

25

~           STORE (     ) button (Teletext)

CHANNEL (PROGRAMME) UP (     )/
DOWN (     ) button

(     ) Selects next higher programme
(     ) Selects next lower programme
(These are also used for menu 
setup)

7

This function will automatically tune all local channels for you.
The following steps are carried out using the remote control.

Press the Power button on the TV
set. When you turn on the TV set
for the first time, the screen on the
right will appear.

AUTO TUNING will start when
selecting “START”, using 

 or

 and pressing 

 on the

remote control, or pressing 

 on

the TV.

All the TV stations in your area
that can be received by the TV set
are automatically preset between
programme position from 1 to 99.

The screen shows whatever is on
programme position 1 when full
auto channel preset is finished.

NOTE: Make sure to execute AUTO TUNING until tuning is complete. When EXIT has been

selected during tuning or when the power has been turned off and turned on again, the
AUTO TUNING screen will be displayed.

Automatically tunes in and presets receivable TV stations

The AUTO TUNING screen will

appear by holding down 

  on

the TV set for more than 2
seconds.

Repeat step 2 above (Initial setting).

• To stop AUTO TUNING, press 

 on the remote

control.

• When AUTO TUNING is not done, select EXIT by

using 

 or 

 on the remote control or

press 

 on the TV set to return to the TV

screen.

• Make sure to start AUTO TUNING after connecting the antenna, as the AUTO TUNING

screen will be displayed when the power is turned on for the first time.

• Make sure to execute AUTO TUNING until tuning is complete. When EXIT has been

selected during tuning or when the power has been turned off and then turned on again,
the AUTO TUNING screen will be displayed.

• When the Child Lock is set, it is not possible to enter the Tuning mode. This is to make

sure that Child Lock is not over-ridden by re-tuning the TV set. (To cancel Child Lock,
please refer to page 21)

          A U T O   T U N I N G

      S T A R T             E X I T

          A U T O   T U N I N G

      S T A R T             E X I T

 

PR 1

          A U T O   T U N I N G

      P R   1               C H   2

0

0

          A U T O   T U N I N G

      S T A R T             E X I T