DOWNLOAD Sharp 15JF-26H (serv.man18) Service Manual ↓ Size: 924.43 KB | Pages: 30 in PDF or view online for FREE

Teletext is an information service, organised like a magazine, provided by some television stations in
addition to regular television broadcasting.

Switching ON, selecting a page number and switching OFF the Teletext.

Select the TV channel which is broadcasting the Teletext
programme you would like to watch.

Press 

 to select the TELETEXT Mode.

Enter three digits using the 0~9 digit buttons to select a page
number.
(

/

 can also be used.)

Press 

 to superimpose a Teletext broadcast onto the

current TV programme screen (MIXED Mode).

Press 

 to exit the TELETEXT Mode.

Select the TV channel which is broadcasting the Teletext
programme you would like to watch.

Press 

 to select the TELETEXT Mode.

To recall a page number displayed in the coloured brackets, simply
press the corresponding coloured button 

.

;;

;;

9 : 0 0

100

;;

;;

300

300

[

!

] More information on “How to Operate Page Memory” (page 26).

In TV  Mode: Pressing this button when the TEXT data is received, the real time information will
appear on the screen.
In TELETEXT  Mode: When a selected Teletext page has hidden subpages or timed pages, these
pages can be seen in the following manner:

1 Press 

. <<SUBPAGE: - - - - >> will be displayed on the screen.

2 Enter 4-digit numbers corresponding to the desired subpage, e.g. 0021 for subpage number
21.
3 Wait until the page appears.

NOTE: You can use this button together with 

. This means that you can view the main TV

picture until the subpage has been found. The on screen icon 

 at the top left side of the screen

will change when the subpage has been found.

Press 

 to view the subpage.

Cancel the Teletext information and restores the TV picture. 

 is shown on the screen.

The TV programme cannot be changed while in Teletext/Cancelled mode. When a change takes
place in the Teletext information, the upper time of the cancelled page or some other indication of
special pages is shown on the screen.

To restore the Teletext, press 

.

NOTE: This button can be used together with 

 while waiting for subpages to appear.

Press to magnity the
upper/lower half of the
Teletext page.

Press to reveal or hide
information such as the
answer to a quiz.

Press to return to TV
mode.

Press to change the
system:
FLOF 

↔

 LIST Mode

[

!

].

Press to hold or cancel
the hold on the current
page.

Press to return to index
page.

Press to store in the
memory the page
numbers in the LIST
Mode [

!

].

Press the corresponding
coloured button, to recall
a page displayed in the
coloured brackets.

Your TV has 64 Teletext page number memories for fast recall of Teletext information.
Four Teletext page numbers can be stored in each position in programme positions 1 through 15; a total of 60
pages.
Only one programme with 4 page numbers can be stored in programme positions 16 through 99, SCART
and FRONT. If you try to store more than 4 page numbers in a programme position between 16 and 99,
SCART and FRONT, the previously stored page numbers will be erased.

Select the programme number into which you want to store Teletext
page numbers.

Press 

 to select the TELETEXT Mode.

Press 

 to change from FLOF system to LIST Mode.

Press a coloured button 

 corresponding to the coloured brackets

on the screen for page number storage.

Enter the Teletext page number using the 0 ~ 9 digit buttons (enter
three digits).

Repeat steps 4 and 5 until the numbers for the desired pages have
been entered.

Press 

 for more than two seconds to store the page numbers

you wish to store in memory. “STORE” appears on the screen.

Press 

 twice to exit the TELETEXT Mode.

Select the appropriate programme channel.

Press 

 to select the TELETEXT Mode.

Press 

 to change from FLOF system to LIST Mode.

To recall a page number displayed in the coloured brackets, simply press the corresponding coloured
button.

(FLOF TELETEXT)

(LIST TELETEXT)

Press 

and 

buttons

Input 

If you want to store, 

press        .

If the fault cannot be corrected by using this guide, remove the mains plug from the wall socket and
contact the dealer or supplier from whom it was purchased. Where this is not possible, please visit our
web-site at www.sharp.co.uk/support. Customers without internet access may telephone 08705
274277 during office hours (or (01) 676 0648 if telephoning from Ireland).

Certain replacement parts and accessories may be obtained from our Main Parts Distributor, who can
be contacted on the following numbers:

Willow Vale Electronics Ltd.

0121 766 5414 and 0161 205 7531

In the unlikely event of this equipment requiring repair during the guarantee period, you will need to
provide proof of the date of purchase to the repairing company. Please keep your invoice or Receipt,
which is supplied at the time of purchasing.

Remote control does not work

Bars on screen

Picture distorted

Picture rolls vertically

No colour

Poor reception on some channels

Picture weak

Picture lines or streaks

Picture ghosting

Picture blurred

Sound OK, picture poor

Picture OK, sound poor

No picture or sound

T

ry a ne

w channel to chec

k f

or possib

le

station trouble

The 

TV set not plugged in

Outlet power OFF

P

o

wer b

utton of the 

TV set not on

Antenna not connected to terminal at the

bac

k of the 

TV set

If outside antenna is used, check for broken

wires

Check for local interference

T

u

rn

 off the 

TV set b

y

 pressing the P

o

wer b

utton

on the 

TV set, then tur

n on again after a min

ute

Adjust COLOUR control

Check batteries in the Remote Control

T

ry fine tuning to correct

Chec

k if the Br

ightness or Contr

ast setting in

Picture Adjustment might be set to the min

us

side

.

Increase the volume

This TV set is equipped with a microprocessor. Its performance could be adversely affected by external
electrical noise or interference. If this should happen, unplug the TV set and plug it in again after a few minutes.