DOWNLOAD Sharp 15FS-25H (serv.man3) Service Manual ↓ Size: 4.58 MB | Pages: 44 in PDF or view online for FREE

Note: Do not apply voltage or current to NC pin from outside

1

2

3

4

5

6

7

8

9

V

CC

Output

            GND

Output

Standby

Input

GND

N.C.

V

olume

Pin No.

Pin Name

1

Inverting Input

2

Power Supply

3

Pump-up Output

4

GND

5

Vertical Output

6

Vertical Output Power Supply

7

Non-inverting Input

Pin No.

Description

1

Vcc

2

Ch Output (+)

3

GND

4

Ch Output (-)

5

Stand-by

6

Ch Input

7

GND (Input)

8

N.C

9

Volume

Non-inverting Input

Output Vcc

Output

GND

Pump Up Out

Vcc

Inverting Input

1

2

3

4

5

6

7

Pump Up

Thermal Protection

Amp

+

-

NOTE:
1. The unit of resistance «ohm»is omitted (K=1000
ohms. M= Megaohm).
2. All resistors are 1/16 watt. unless otherwise noted.
3. All capacitors are 

µ

F, unless otherwise noted (P=

µµ

F).

4. The capacitor with Part No. RC-FZ9XXXBMNJ is
designed to with stand 63V.
5. The capacitor with Part No. RC-FZ4XXXBMNJ is
designed to with stand 50V.

WAVEFORM MEASUREMENT CONDITION:
Colour bar generator signal of 70 dB from RF input.

THE AREA ENCLOSED BY THIS LINE (           )
IS DIRECTLY CONNECTED WITH AC MAINS
VOLTAGE.
WHEN SERVICING THE AREA, CONNECT AN
ISOLATING TRANSFORMER BETWEEN TV
RECEIVER AND AC LINE TO ELIMINATE HAZ-
ARD OF ELECTRIC SHOCK.

PARTS MARKED WITH  «

»  (

 

                      

) ARE

IMPORTANT FOR MAINTAINING THE SAFETY
OF THE SET. BE SURE TO REPLACE THESE
PARTS WITH SPECIFIED ONES FOR MAINTAIN-
ING THE SAFETY AND PERFORMANCE OF THE
SET.

!

SAFETY NOTE:
1. DISCONNECT THE AC PLUG FROM THE AC
OUTLET BEFORE REPLACING PARTS.

2. SEMICONDUCTOR HEAT SINKS SHOULD BE
REGARDED AS POTENTIAL SHOCK HAZARDS
WHEN THE CHASSIS IS OPERATING.