Sharp XV-Z10000 (serv.man33) User Manual / Operation Manual ▷ View online
-70
Overview of All Menu
Settings
Settings
Select the “Status” menu on the menu
screen and press
screen and press
.
➝For operating the menu screen, see
pages 40 to 43.
pages 40 to 43.
This function can be used to display all the adjusted settings as a list on the screen.
Displaying the Adjustment Settings
-70
Appendix
Appendix
-72
Cleaning the lens
■ Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the coat-
ing film on the surface of the lens.
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the coat-
ing film on the surface of the lens.
■ As the surface of the lens can easily get dam-
aged, be sure not to scrape or hit the lens.
Cleaning the exhaust and intake vents
■ Use a vacuum cleaner to clean dust from the
exhaust vent and the intake vent.
Maintenance
Cleaning the projector
■ Be sure to unplug the power cord before clean-
ing the projector.
■ The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or thinner,
as these can damage the finish on the cabinet.
as these can damage the finish on the cabinet.
■ Do not use volatile agents such as insecticides
on the projector.
Do not attach rubber or plastic items on the pro-
jector for long time.
Do not attach rubber or plastic items on the pro-
jector for long time.
The effects of some of the agents in the plastic
may cause damage to the quality or finish of the
projector.
projector.
■ Wipe off dirt gently with a soft flannel cloth.
■ When the dirt is hard to remove, soak a cloth in a
neutral detergent diluted with water, wring the
cloth well and then wipe the projector.
Strong cleaning detergents may discolour, warp
or damage the coating on the projector.
Make sure to test on a small, inconspicuous area
on the projector before using.
cloth well and then wipe the projector.
Strong cleaning detergents may discolour, warp
or damage the coating on the projector.
Make sure to test on a small, inconspicuous area
on the projector before using.
Wax
Thinner
Neutral detergent
diluted with water
diluted with water
Neutr
al detergent
Cleaning
Paper
Appendix
-73
Cleaning the Ventilative Holes
Power
(OFF)
button
(OFF)
button
Power
(OFF)
button
(OFF)
button
Cleaner
hose
hose
Cleaner
hose
hose
Ventilative
holes
holes
Ventilative
holes
holes
• This projector is equipped with
ventilative holes to ensure the opti-
mal operating condition of the projec-
tor.
mal operating condition of the projec-
tor.
• Periodically clean the ventilative hole
by vacuuming it off with a vacuum
cleaner.
cleaner.
• The ventilative holes should be
cleaned every 100 hours of use. Clean
the ventilative holes more often when
the projector is used in a dirty or
smoky location.
the ventilative holes more often when
the projector is used in a dirty or
smoky location.
Cleaning the
Ventilative Holes
Ventilative Holes
1
Press
on the projector or
on the remote control to turn
off the power.
off the power.
•
Wait until the cooling fan stops.
2
Disconnect the Power Cord.
3
Clean the dust off by putting
the cleaner hose on the intake
ventilative holes.
the cleaner hose on the intake
ventilative holes.
Side and Rear view
Bottom view
Click on the first or last page to see other XV-Z10000 (serv.man33) service manuals if exist.