Sharp XV-Z10000 (serv.man33) User Manual / Operation Manual ▷ View online
E-66
Setting the Video System
The video input system mode is preset to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
Setting the Video
System
System
Select “Video System” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•
The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
PUT 3 or INPUT 4 mode.
•
In “Auto”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
even if PAL-N or PAL-M input signals are
received.
When connected to PAL video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
PAL
SECAM
SECAM
NTSC4.43
NTSC3.58
* If the input signal has interference, the screen will be displayed with the interference.
Selecting a
Background Image
Background Image
Select “Background” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Selected Item
Blue
None
Description
Blue screen
Black screen
*
Setting a Background Image
This function allows you to select the image displayed when no signal is being sent to the projector.
-66
Easy to Use Functions
-67
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Select “Power Save” in “Economy
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•
Although noise is reduced when “Power
Save” is set to “ON”, brightness decreases
by 20%.
Save” is set to “ON”, brightness decreases
by 20%.
•
“Power Save” mode is factory preset to
“OFF”.
“OFF”.
•
“Power Save” is switched on and off by
pressing
pressing
.
RS-232C Off Function
This projector consumes power when using a
computer connected to the RS-232C terminal.
When not using these terminals, “RS-232C
Port” can be set to “OFF” to reduce standby
power consumption.
computer connected to the RS-232C terminal.
When not using these terminals, “RS-232C
Port” can be set to “OFF” to reduce standby
power consumption.
Select “RS-232C Port” in “Economy
Mode” under the “Options” menu on the
menu screen.
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
pages 40 to 43.
Note
•
Set “RS-232C Port” to “ON” when using the
SharpVision Manager Software.
SharpVision Manager Software.
•
“RS-232C Port” is switched on and off by
pressing
pressing
.
ON
OFF
RS-232C connection is set to “ON”.
The RS-232C is operating at all
times (to accept communications).
The RS-232C is operating at all
times (to accept communications).
RS-232C connection is set to
“OFF”. RS-232C does not operate
when the power supply is in
standby.
“OFF”. RS-232C does not operate
when the power supply is in
standby.
Brightness
80%
100%
Status
ON
(Low power mode)
(Low power mode)
OFF
(Standard mode)
(Standard mode)
Power
consumption
220 W
270 W
Automatic Power Off
Function
Function
When no input signal is detected for more than
15 minutes, the projector will automatically
turn off if set to “ON”.
The Auto Power Off function will be disabled
when it is set to “OFF”.
15 minutes, the projector will automatically
turn off if set to “ON”.
The Auto Power Off function will be disabled
when it is set to “OFF”.
Select “Auto Power Off” in “Economy
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•
When the Auto Power Off function is set
to “ON”, 5 minutes before the power turns
off, the message “Power OFF in X min.”
will appear on the screen to indicate the
remaining minutes.
to “ON”, 5 minutes before the power turns
off, the message “Power OFF in X min.”
will appear on the screen to indicate the
remaining minutes.
•
“Auto Power Off” is switched on and off
by pressing
by pressing
.
Selecting the Economy Mode
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
sion Speed (RS-232C)
Select “RS-232C” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•
Make sure that both the projector and
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.
-68
Easy to Use Functions
-69
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
invert the projected image for various applications.
Setting the Projection
Mode
Mode
Select “PRJ Mode” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Selected Item
Front
Ceiling + Front
Rear
Ceiling + Rear
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Front
Ceiling+Front
Rear
Ceiling+Rear
Note
•
This function is used for the reversed im-
age and ceiling-mount setups. See page 30
for these setups.
age and ceiling-mount setups. See page 30
for these setups.
Click on the first or last page to see other XV-Z10000 (serv.man33) service manuals if exist.