Sharp XV-Z100 (serv.man2) Service Manual ▷ View online
33
XV-Z100
YES
Check peripheral circuits of
IC703.
IC703.
YES
Is 13 V applied to pins (3)
and (4) of the connector
P704?
and (4) of the connector
P704?
YES
YES
Is DC voltage of 380 V
applied to both ends of
C704?
applied to both ends of
C704?
YES
Check circuits R766 and
after or replace R766.
after or replace R766.
YES
Is R766 in the OPEN
status?
status?
Is pin (11) of the connector
P704 at "H"?
P704 at "H"?
Are connectors P704 and
CN901 fully inserted?
CN901 fully inserted?
Is 6 V applied to pins (7)
and (8) of the connector
P704?
and (8) of the connector
P704?
NO
NO
NO
Securely insert the
connectors.
connectors.
Check peripheral circuits
of IC902.
of IC902.
YES
NO
NO
Is LAMP-EN/SYNC signal
properly sent to pin (14) of
the connector P704?
(Refer to the waveform
chart
properly sent to pin (14) of
the connector P704?
(Refer to the waveform
chart
1
.)
Are GATE waveforms of
Q901 and Q903
appropriate?
(See waveform diagram
Q901 and Q903
appropriate?
(See waveform diagram
8
.)
NO
Does the lamp turn on?
YES
Check the main PWB.
Check the main PWB.
NO
Check the main PWB.
NO
Check the ballast PWB.
NO
Power supply PWB
check
check
1
34
XV-Z100
YES
YES
YES
Securely insert the connectors.
NO
Replace F701.
NO
Press the red button on the
bimetal.
bimetal.
NO
YES
NO
YES
NO
Are connectorsP701 and
P702 fully inserted?
P702 fully inserted?
Is AC voltage between 100
−
240 V applied to both
ends of C707?
Is the bimetal broken?
(Connection between 1 and
2 of P702)
(Connection between 1 and
2 of P702)
Is R717 open?
Check that P704 connector
pin (11) is at "H". Replace
R717.
pin (11) is at "H". Replace
R717.
Is R705 open?
Replace F705.
Check that the power
supply FAN FB and FC
are not stopped.
Check that the power
supply FAN FB and FC
are not stopped.
Check peripheral circuits of
IC703.
IC703.
1
35
XV-Z100
NO
Go to "Check when the
lamp turns off soon after
turning on".
lamp turns off soon after
turning on".
YES
Securely insert the
connectors.
connectors.
YES
Securely insert the
connectors.
connectors.
YES
Check IC3581 and
peripheral circuits. (Refer
to the waveform chart
peripheral circuits. (Refer
to the waveform chart
2
.)
NO
Check IC1701 and
peripheral circuits. (Refer
to the waveform chart
peripheral circuits. (Refer
to the waveform chart
1
.)
NO
Fully insert the connectors
or replace the harnesses.
or replace the harnesses.
YES
Replace the lamp.
YES
Go to "Power supply PWB
check".
check".
NO
Replace both D911 and
D912.
D912.
YES
Replace D914 or D910,
whichever is short-circuited.
whichever is short-circuited.
YES
Replace the color wheel.
YES
Checking the lamp
light-up
Does the lamp turn on
when the power is turned
when the power is turned
Is the lamp tight in the
socket?
socket?
NO
Has the FPC cable to
SC3581 come off or is it
loose?
SC3581 come off or is it
loose?
Is rotating sound of the
color wheel heard?
color wheel heard?
NO
Is approx. 0.7 V applied to
TL1706?
TL1706?
YES
NO
Has the harness connected
to P702 on the power
supply unit come off, or is it
loose? Otherwise, is it
broken?
to P702 on the power
supply unit come off, or is it
loose? Otherwise, is it
broken?
NO
Dose the lamp turn on after
the replacement?
the replacement?
YES
Is 340 VDC applied to both
ends of C914?
ends of C914?
NO
Is D911 or D912 short-
circuited?
circuited?
Is D914or D910 short-
circuited?
circuited?
YES
36
XV-Z100
NO
Securely insert the
connectors.
connectors.
YES
Check the cooling fan.
NO
Check peripheral circuits of
Q1721.
Q1721.
NO
Check IC1761, IC3581 and
peripheral circuits.
peripheral circuits.
NO
Go to "DMD system check".
Is 3.3 V applied to TL1762?
NO
Check IC1791 and
peripheral circuits.
peripheral circuits.
NO
Check PHOTO SENSOR
PWB.
PWB.
NO
Check IC1701 and
peripheral circuits.
peripheral circuits.
NO
Check IC1762 and
peripheral circuits.
peripheral circuits.
YES
Is 5 V applied to TL1712
with P1703 removed?
with P1703 removed?
NO
Check connection of
FB1710.
FB1710.
NO
Check when the lamp turns
off soon after turning on
off soon after turning on
Have connectors P1703,
P1721, P1722, P1723 and
P1724 come off or are they
loose?
P1721, P1722, P1723 and
P1724 come off or are they
loose?
Is each cooling fan
rotating?
rotating?
Is approx. 3 V applied to
TL1721?
TL1721?
YES
Is 12 V applied to TL1761?
YES
Is 2.5 V applied to
TL1763?
TL1763?
YES
Check IC1763 and
peripheral circuits.
peripheral circuits.
NO
Is 5 V applied to TL1712?
YES
Is the signal of 180 Hz
sent to TL1716?(When
vertical frequency of the
input signal is 60 Hz)
sent to TL1716?(When
vertical frequency of the
input signal is 60 Hz)
YES
Is the signal of 180 Hz
sent to TL1706? (When
vertical frequency of the
input signal is 60 Hz)
sent to TL1706? (When
vertical frequency of the
input signal is 60 Hz)
YES
YES
Is 5 V applied to TL1791?
YES
Check the power supply
ballast PWB.
ballast PWB.
YES
Click on the first or last page to see other XV-Z100 (serv.man2) service manuals if exist.