Sharp XG-NV1E (serv.man4) Service Manual ▷ View online
XG-NV1E
XG-NV1EA
XG-NV1EA
9
XG-NV1E
XG-NV1EA
XG-NV1EA
10
XG-NV1E
XG-NV1EA
XG-NV1EA
11
REMOVING OF MAJOR PARTS
Before starting this job, detach the lamp cage unit and the filter cover.
1. Removing the top cabinet
1-1. Remove the three screws at the carrying handle side.
1-2. Remove the two screws at the terminals side.
1-3. Detach the terminal door, and remove the four screws off the terminal cover.
1-4. Slowly lift the back of the top cabinet and disconnect the operation key unit connector (KY). Pull up and
1-3. Detach the terminal door, and remove the four screws off the terminal cover.
1-4. Slowly lift the back of the top cabinet and disconnect the operation key unit connector (KY). Pull up and
away the top cabinet.
1-5. Place the top cabinet upside down. Remove the four screws off the operation key unit. Take out the
operation key unit.
(KY)
1-2
1-4
1-3
1-2
Top Cabinet
Terminal Door
1-1
XG-NV1E
XG-NV1EA
XG-NV1EA
12
2. Removing the front cabinets
2-1. Tilt the front-right cabinet forward. Pull it up out of position.
2-2. Tilt the front-left cabinet forward. Disconnect the infrared R/C receiver unit. Pull up the cabinet out of
2-2. Tilt the front-left cabinet forward. Disconnect the infrared R/C receiver unit. Pull up the cabinet out of
position.
2-2
2-1
Front-right Cabinet
Infrared R/C Receiver Unit
Front-left Cabinet
Click on the first or last page to see other XG-NV1E (serv.man4) service manuals if exist.