DOWNLOAD Sharp XG-C68X Service Manual ↓ Size: 1.09 MB | Pages: 60 in PDF or view online for FREE

5

Specification
ANSI Lumens

3600

Native Resolution

XGA

Dimensions (W x H x D mm)

390 x 99 x 294

Weight

5.2kg

Panel Size

0.9” TFT LCD x 3

Contrast Ratio

400:1

Fan Noise

36dB

Inputs
Composite

Y

Component

Y via PC RGB

S-Video

Y

PC RGB

Y x 2

RS-232

Y

DVI

N

PCMCIA

N

Audio

Y

Outputs
PC RGB

Y (inc Component)

Audio

Y

RS-232

Y

Other Outputs

N

Configuration
Ceiling Mountable

Y

Throw Ratio

1.74 – 2.18:1

Focus

Manual

Lens Shift

N

Supported Resolutions

UXGA, SXGA+, SXGA,

XGA, SVGA, VGA, 

MAC 21”/19”/16”/13”

Audio

3W

Control

Via RS-232

Available Lenses

3

Remote Control

InfraRed/Wired

Mouse Function

Y

Pointer

N

Lamp

310W

Lamp Life

3000

Warranty

3Yr RTB

Lamp Warranty

90 days

Additional Features

Lockdown feature, Carry

Handle, Quick Release

Lens

6

General Terms & Conditions
Product warranty is offered on the terms specified in this policy, provided that:
(a) The product is serviced by the approved service company.
(b) Repairs or alterations have not been performed or attempted by unauthorised personnel.
(c) The product is of original design and specification.
(d) The product has been properly maintained and operated in accordance with the
manufacturers specifications.
(e) The product is within its stated warranty period.
(f) Proof of purchase is available on request.
(g) The fault has been caused by a genuine manufacturing defect.

Exclusions to Warranty
The following items are not covered by the warranty. Any work carried out relating to these
items will be on a chargeable basis:
(a) Faults caused directly or indirectly by incorrect installation, maintenance or operation.
(b) Accidental damage, misuse, abuse or neglect.
(c) Alteration or repairs carried-out by person(s) not authorised by Sharp.
(d) General wear & tear.
(e) Internal cleaning & maintenance.
(f) Act of God, such as fire, flood, lightening etc.
(g) The supply of fraudulent or negligent information to the Help-Desk or service company.
(h) Cosmetic parts, including cabinet & exterior parts.
(i) Consumable items, including projector lamps & air filters.
(j) Cables (unless faulty-as-new).
(k) Fuses (unless related to an applicable fault).
(l) Batteries.
(m) Use of the product in conjunction with other products or accessories not approved by
Sharp.
(n) Pixel failures within the specification of the product. (LCD & DMD panels)
(p) Installation and/or decommissioning (unless otherwise stated).

No Fault Found
Product returned to the approved service company with no-fault-found, or is found to be
operating in accordance with its specification, will be subject to a handling charge.

Routine Maintenance
Routine maintenance, such as external cleaning, replacement of air filters etc, should be
carried out at the intervals specified in the product operation manual by the reseller (or end-
user where applicable).

Projector Products:
Where these products are used in dusty and/or smoky environments, then the frequency of
routine maintenance should be increased appropriately

Internal Cleaning: 
Where periodic internal cleaning is required, this must only be carried out by qualified
personnel.

7

Geographical Areas Covered
UK; Republic of Ireland

Warranty Service Arrangements
3-years standard
The reseller should return the product to the approved service company at their cost. The
approved service company will repair and return to the reseller under warranty.

Lamp Warranty Service Arrangements
90-days standard
The end-user returns the faulty lamp and lamp warranty claim form (Provided with the
projector) to the approved service company who will inspect and replace under warranty.

Prince of Wales Industrial Park
Vulcan St
Oldham
Lancashire OL1 4ER
Tel: 0161 626 4067
Fax: 0161 627 1741
Internet: 

www.tpgroup.co.uk

8

• 

The warning lights on the projector indicate problems inside the projector.

• 

If a problem occurs, either the temperature warning indicator or the lamp replacement
indicator will illuminate red, and the power will turn off. After the power has been turned
off, follow the procedures given below.

If the temperature inside the projector increases, due
to blockage of the air vents, or the setting location,
“TEMP ” will blink in the lower left corner of the
picture. If the temperature keeps on rising, the lamp
will turn off and the temperature warning indicator
will blink, the cooling fan will run for further 90
seconds, then the power will be shut off. After
“TEMP” appears, be sure to perform the following
measures.

• 

The lamp life becomes 0%, when used for
approximately 3,000 hours with “ON” in “Power
Save” or when used for approximately 2,000
hours with “OFF” in “Power Save”.

• 

When the remaining lamp life becomes 6% or
less, “Lamp Warning Icon” will be displayed on
the screen in yellow. When the percentage
becomes 0%, “Lamp Warning Icon” will change
to “Lamp Warning Icon” (red), the lamp will
automatically turn off and then the projector as
well. At this time, the lamp replacement indicator
will illuminate in red.

• 

If you try to turn on the projector a fourth time
without replacing the lamp, the projector will not
turn on.