DOWNLOAD Sharp XG-C40XE Service Manual ↓ Size: 857.03 KB | Pages: 50 in PDF or view online for FREE

45

Since the lamp reaches a very high temperature during units operation replacement of the
lamp should be done at least one hour after the power has been turned off. (To allow the
lamp to cool off.)
Installing the new lamp, make sure not to touch the lamp (bulb) replace the lamp by holding
its reflector 2.
[Use original replacement only.]

DANGER! –– 

Never turn the power on without the lamp to avoid electric-shock or damage

of the devices since the stabiliser generates high voltages at its start.

Since small amounts of UV-Radiation are emitted from an opening between the duct cover
and the lamp housing, it is recommended to place the LENS CAP on the opening during
servicing to avoid eye and skin exposure.

46

Pixel Failures
Test Conditions

Room light:

10-Lux max.

Input signal:

Bright spot – black pattern
Black spot – white pattern or R, G, B

Settings:

Factory defaults

Lens:

40 inches (102cm) in maximum zoom-in.

Focus:

Best position

Monitoring distance:

3.0m

This specification is in accordance with the product specification.

Allowable quantity of defective pixels on screen:

1. Bright Spot

Pixel Type

Red

Green

Blue

Brightness Rate

More than 2.5%

More than 1.5%

More than 5%

Quantity of pixels

5

5

5

2. Black Spot

Pixel Type

Red

Green

Blue

Quantity of pixels

5

5

5

Allowable quantity of dust on screen

Red

Green

Blue

Dust Dot

6

4

8

47

48