DOWNLOAD Sharp XG-C330X Service Manual ↓ Size: 33.67 MB | Pages: 127 in PDF or view online for FREE

XG-C330X/C430X

4 – 2

1. Projector software rewriting will be done with the Flash Up grader. 

2. Unpack the software file. 

3. Double-click on the "FlashUpgrader.exe ", so below window will be displayed on PC. 

4. Click on the “Choose” button.

Then, below window will be displayed on PC. 

XG-C330X/C430X

4 – 3

5. Clock on the above position and select the latest software

If you mistook the folder, please select the unpacked folder.

6. There is file named " pwSDK.inf " in this folder.

XG-C330X/C430X

4 – 4

7. Double-click on the "pwSDK.inf". 

Note: 

Options: Continuous Flash Mode; Do not put check point.

                Notify On Completion; Do not put check point.

                Reset Target After download; Put the check point.

 Modes: Put the check point in “Flash”.

8. Click on the “Flash” button. 

Then, below image will be appeared.

Now, preparation is completed.

XG-C330X/C430X

4 – 5

9. Next, connect the AC cord of the projector and software rewriting will start automatically. 

If the gauge is not started, please check the “LEAF SW JIG” or “Write SW”.
Rewriting times are about 3 or 4 minutes.
Do not disconnect the AC cord by at this time. 

Below window is under writing.

And below window will appear after software rewriting is completed.

Please click on “Close “ and software rewriting is finished. 

10.Remove the LEAF SW JIG : PSPAZB245WJKZ and attach the filter cover.

Or select S2701 of main PWB to “NORMAL” side and attach the top cabinet.
Projector will be Normal mode(Non-writing mode)