DOWNLOAD Sharp PG-M25XE (serv.man33) Service Manual ↓ Size: 9.93 MB | Pages: 127 in PDF or view online for FREE

When using the default setting.

▼On-screen Display

■ Place a translucent screen between the projector and the

audience.

■ Reverse the image by setting “Rear” in “PRJ Mode”. See

 for use of this function.

■ Place a mirror (normal flat type) in front of the lens.

■ Reverse the image by setting “Rear” in “PRJ Mode”, when the

mirror is placed on the audience side. See 

 for use of

this function.

• When using a mirror, be sure to carefully position both the pro-

jector and the mirror so the light does not shine into the eyes of
the audience.

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.) (AN-
PGCM90 ceiling-mount bracket, its AN-EP101B extension tube
and AN-JT200 universal bracket, adaptor for non-level ceiling
installation (for U.S.A.), BB-M20T ceiling adaptor, its BB-
NVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY), or AN-60KT ceiling-
mount bracket, its AN-TK301/AN-TK201 and AN-TK302/AN-
TK202 extension tubes (for countries other than the U.S.A. and
GERMANY))

■ Be sure to adjust the position of the pro-

jector to match the distance (H) from
the lens center position (see 

)

to the lower edge of the image, when
mounting the projector on
the ceiling.

■ Invert the image by

setting “Ceiling + Front”
in “PRJ Mode”.

The image is reversed.

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is inverted.

Note

• Before connecting, be sure to turn off both the projector and the devices to be connected. After making all

connections, turn on the projector and then the other devices.
When connecting a computer, be sure that the computer is the last device to be turned on after all the
connections are made.

• Be sure to read the operation manuals of the devices to be connected before making connections.

■ A DVI to 15-pin D-sub cable (See 

■ A DVI cable (type AN-C3DV) (sold separately)

■ A wireless LAN PC card (See 

■ A DVD player or DTV* decoder (See 

■ A VCR, Laser disc player or other audio-visual equipment

*DTV is the umbrella term used to describe the new digital television

system in the United States.

■ An RGB monitor loop-out adaptor (AN-A1MY) (sold sepa-

Supplied
accessory

Power cord

1

DVI to 15-pin D-sub cable

• Secure the connectors by tightening

the thumbscrews.

Note

• See 

 “Computer Compatibility

Chart” for a list of computer signals com-
patible with the projector. Use with com-
puter signals other than those listed may
cause some of the functions not to work.

• When connecting the projector to a com-

puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See 

• A Macintosh adaptor may be required for

use with some Macintosh computers. Con-
tact your nearest Shar p Authorized
Projector Dealer or Service Center. See

■ Connect the thumbscrew cable making sure that it

fits correctly into the port. Then, firmly secure the
connectors by tightening the screws on both sides
of the plug.

■ Do not remove the ferrite core attached to the DVI

to 15-pin D-sub cable.

Supplied
accessory

DVI to 15-pin
D-sub cable

To RGB Output port

To Audio Output port

Notebook computer

2

ø3.5 mm stereo audio
cable (commercially
available or available as
Sharp service part
QCNW-4870CEZZ)

1

DVI cable

(sold separately)

Note

• This DVI input port is DVI version 1.0 com-

patible. Therefore when the signal is in-
put from copy guard system compatible
(DVI version 2.0) equipment, no signal will
be received.

■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC

compatible computer will communicate their setting requirements, allowing for quick and easy setup.

■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected

computer last.

Note

• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a

VESA DDC compatible computer.

Optional
accessory

DVI cable
Type: AN-C3DV
(9'10" (3.0 m))

To DVI Digital Output port

To Audio
Output port

2

ø3.5 mm stereo
audio cable
(commercially
available or available
as Sharp service part
QCNW-4870CEZZ)

Desktop computer