DOWNLOAD Sharp PG-F320W (serv.man13) Service Manual ↓ Size: 4.96 MB | Pages: 72 in PDF or view online for FREE

Model
PG-F320W (serv.man13)
Pages
72
Size
4.96 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector
File
pg-f320w-sm13.pdf
Date

Sharp PG-F320W (serv.man13) User Manual / Operation Manual ▷ View online

17
Quic
k Star
t
4.  Adjust the projected image with the Setup Guide
_PP. 27, 28
1
After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”.  See page 
45
.)
2
Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle).
3
After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup
Guide.
Correcting trapezoidal distortion using Keystone Correction.
5. Correct trapezoidal distortion
8. Turn the power off
Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the
button again while the confirmation message is displayed to put the projector into standby mode.
On-screen display
On the
projector
On the remote
control
_P. 26
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
_P. 29
Select the “COMPUTER” using INPUT on the projector or COMPUTER on the remote control.
6. Select the INPUT mode
• When you press INPUT on the projector, the INPUT list appears.
Press '/" to switch the INPUT mode.
On the
projector
On the remote
control
INPUT list
_P. 30
INPUT
COMPUTER 
DVI-D Computer
D
DVI-D Video
D
On-screen display (RGB)
RGB
1024 × 768
COMPUTER
7. Turn the computer on
18
Ceiling-mount Setup
■ It is recommended that you use the optional
Sharp ceiling-mount adaptor and unit for this
installation. Before mounting the projector,
contact your nearest Sharp Authorized Pro-
jector Dealer or Service Center to obtain the
recommended ceiling-mount adaptor and unit
(sold separately).
Setting up the Projector
Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet
flat and level. Doing so will eliminate the need for Keystone correction and provide the best image
quality. (See page 
29
.)
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according
to the desired picture size. (See page 
20
.)
Example of standard setup
Screen
Lens center
H
L
• Refer to page 
20
 for additional information concerning “Screen Size and Projection Distance”.
Note
Side View
19
Setup
300"
200"
100"
60"
254"
×159"
170"
×
106"
85"
×
53"
51"
×
32"
28'11
"– 33'
8"
(8.8 m – 10.3 m)
19'6
"– 22'6
"
(5.9 m 
– 6.9 m)
9'9
"– 11'1
"
(3.0 m 
– 3.4 m)
5'10
"– 6'8
"
(1.8 m – 2.0 m)
Projection (PRJ) Mode
The projector can use any of the 4 projection modes shown in the diagram below. Select the mode
most appropriate for the projection setting in use.  (You can set the PRJ mode in “SCR-ADJ” menu.
See page 
45
.)
■ Table mounted, front projection
[Menu item 
➞ “Front”]
■ Ceiling mounted, front projection
[Menu item 
 “Ceiling + Front”]
■ Table mounted, rear projection
(with a translucent screen)
[Menu item 
 “Rear”]
■ Ceiling mounted, rear projection
(with a translucent screen)
[Menu item 
 “Ceiling + Rear”]
Indication of the Projection Image Size and Projection Distance
Picture Size
Projection
Distance
Example: 16:10 Signal Input (Normal Mode)
20
Setting up the Projector (Continued)
300" (762 cm)
250" (635 cm)
200" (508 cm)
150" (381 cm)
120" (305 cm)
100" (254 cm)
80" (203 cm)
60" (152 cm)
40" (102 cm)
646 cm (254")
538 cm (212")
431 cm (170")
323 cm (127")
258 cm (102")
215 cm (85")
172 cm (68")
129 cm (51")
86 cm (34")
32 cm
27 cm
22 cm
16 cm
13 cm
11 cm
  9 cm
  6 cm
  4 cm
404 cm (159")
337 cm (132")
269 cm (106")
202 cm (79")
162 cm (64")
135 cm (53")
108 cm (42")
81 cm (32")
54 cm (21")
8.8 m (28' 11")
7.4 m (24' 2")
5.9 m (19' 6")
4.4 m (14' 5")
3.6 m (11' 8")
3.0 m (9' 9")
2.4 m (7' 9")
1.8 m (5' 10")
1.2 m (3' 11")
10.3 m (33' 8")
8.6 m (28' 1")
6.9 m (22' 6")
5.1 m (16' 8")
4.1 m (13' 4")
3.4 m (11' 1")
2.7 m (8' 11")
2.0 m (6' 8")
1.4 m (4' 5")
(12")
(10")
(8")
(6")
(5")
(4")
(3")
(2")
(1")
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.03341χ
L2 (m) = 0.03853χ
H (cm) = 0.12248χ
Screen Size and Projection Distance
16:10 Signal Input (Normal Mode)
• Refer to page 
18
 concerning “Projection distance [L]” and “Distance from the lens center to the
bottom of the image [H]”.
• Allow a margin of error in the values in the diagrams above.
Picture (Screen) size
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.02952χ
L2 (m) = 0.03408χ
H (cm) = 0.10828χ
χ: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
χ: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
Projection distance [L]
Diag. [χ]
Width
Height
Minimum [L1]
Maximum [L2]
457 cm (180")
381 cm (150")
305 cm (120")
229 cm (90")
183 cm (72")
152 cm (60")
122 cm (48")
107 cm (42")
91 cm (36")
61 cm (24")
300" (762 cm)
250" (635 cm)
200" (508 cm)
150" (381 cm)
120" (305 cm)
100" (254 cm)
80" (203 cm)
70" (178 cm)
60" (152 cm)
40" (102 cm)
610 cm  (240")
508 cm  (200")
406 cm  (160")
305 cm  (120")
244 cm  (96")
203 cm  (80")
163 cm  (64")
142 cm  (56")
122 cm  (48")
  81 cm  (32")
10.0 m
8.3 m
6.7 m
5.0 m
4.0 m
3.4 m
2.7 m
2.3 m
2.0 m
1.3 m
(32' 9")
(27' 4")
(22' 0")
(16' 4")
(13' 3")
(11' 0")
(8' 10")
(7' 7")
(6' 7")
(4' 5")
11.6 m
9.7 m
7.8 m
5.8 m
4.6 m
3.8 m
3.1 m
2.7 m
2.3 m
1.5 m
(38' 1")
(31' 9")
(25' 6")
(18' 10")
(15' 1")
(12' 7")
(10' 1")
(8' 10")
(7' 7")
(5' 0")
37 cm
31 cm
24 cm
18 cm
15 cm
12 cm
10 cm
9 cm
7 cm
5 cm
(14")
(12")
(9")
(7")
(5")
(4")
(3")
(3")
(2")
(1")
Note
Distance from the lens center
to the bottom of the image [H]
Picture (Screen) size
Projection distance [L]
Diag. [χ]
Width
Height
Minimum [L1]
Maximum [L2]
Distance from the lens center to
the bottom of the image [H]
[Feet/inches]
L1 (ft) = 0.02952χ / 0.3048
L2 (ft) = 0.03408χ / 0.3048
H (in) = 0.10828χ / 2.54
[Feet/inches]
L1 (ft) = 0.03341χ / 0.3048
L2 (ft) = 0.03853χ / 0.3048
H (in) = 0.12248χ / 2.54
4:3 Signal Input (Normal Mode)
Page of 72
Display

Click on the first or last page to see other PG-F320W (serv.man13) service manuals if exist.