Sharp PG-F150X (serv.man5) User Manual / Operation Manual ▷ View online
15
Intr
oduction
Usable Range
The remote control can be used to control the
projector within the ranges shown in the
illustration.
projector within the ranges shown in the
illustration.
Note
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control
• Ensure that you do not drop it or expose it to
moisture or high temperature.
• The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
jector away from the fluorescent lamp.
Remote control sensor
Remote control
signal transmitters
signal transmitters
Remote control
23n (7 m)
30°
30°
PGF150X_E_P13_15.p65
07.5.31, 6:25 PM
15
16
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than a computer, see
pages 22 and 23.
pages 22 and 23.
3. Remove the lens cap and turn the projector on
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
On the projector
On the remote control
KEYSTONE button
INPUT buttons
STANDBY/ON
button
button
HEIGHT
ADJUST lever
ADJUST lever
Focus ring
STANDBY button
_PP. 21, 24
_P. 25
ENTER button
ENTER button
6
4
3
5
8
3
5
6
8
KEYSTONE
button
button
4
4
ON button
COMPUTER button
4
1. Place the projector facing a wall or a screen
_P. 18
5
Adjustment buttons
(P/R/O/Q)
(P/R/O/Q)
5
Adjustment buttons
(P/R/O/Q)
(P/R/O/Q)
Zoom ring
4
PGF150X_E_P16_17.p65
07.5.31, 6:25 PM
16
17
Quic
k Star
t
4. Adjust the projected image with the Setup Guide
_PP. 26, 27
1
After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”. See page 42.)
(When “Setup Guide” is set to “On”. See page 42.)
2
Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle).
3
After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup
Guide.
Guide.
Correcting trapezoidal distortion using Keystone Correction.
5. Correct trapezoidal distortion
8. Turn the power off
Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the
button again while the confirmation message is displayed to put the projector into standby mode.
button again while the confirmation message is displayed to put the projector into standby mode.
On-screen display
On the
projector
On the remote
control
_P. 25
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
_P. 28
Select the “COMPUTER” using INPUT on the projector or COMPUTER on the remote control.
6. Select the INPUT mode
• When you press INPUT on the projector, the INPUT list appears.
Press '/" to switch the INPUT mode.
On the
projector
On the remote
control
INPUT list
_P. 29
INPUT
COMPUTER
DVI-D Computer
D
DVI-D Video
D
On-screen display (RGB)
RGB
1024 × 768
1024 × 768
COMPUTER
7. Turn the computer on
PGF150X_E_P16_17.p65
07.5.31, 6:25 PM
17
18
Ceiling-mount Setup
■ It is recommended that you use the optional
Sharp ceiling-mount bracket for this installa-
tion. Before mounting the projector, contact
your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the rec-
ommended ceiling-mount bracket (sold
separately).
tion. Before mounting the projector, contact
your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the rec-
ommended ceiling-mount bracket (sold
separately).
Setting up the Projector
Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet
flat and level. Doing so will eliminate the need for Keystone correction and provide the best image
quality. (See page 28.)
flat and level. Doing so will eliminate the need for Keystone correction and provide the best image
quality. (See page 28.)
Side View
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according
to the desired picture size. (See page 20.)
Example of standard setup
Screen
Lens center
H
L
• Refer to page 20 for additional information concerning “Screen Size and Projection Distance”.
Note
PGF150X_E_P18_20.p65
07.5.31, 6:25 PM
18
Click on the first or last page to see other PG-F150X (serv.man5) service manuals if exist.