DOWNLOAD Sharp PG-B10S (serv.man32) Service Manual ↓ Size: 1.98 MB | Pages: 21 in PDF or view online for FREE

All the safety and operating instructions should be read before
the product is operated.

The safety and operating instructions should be retained for
future reference.

All warnings on the product and in the operating instructions
should be adhered to.

All operating and use instructions should be followed.

Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.

Do not use attachments not recommended by the product
manufacturer as they may cause hazards.

Do not use this product near water–for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.

Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury
to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the
manufacturer.

A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.

Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.

This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product
dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the
operating instructions.

This product is provided with one of the following types of
plugs. If the plug should fail to fit into the power outlet,
please contact your electrician.
Do not defeat the safety purpose of the plug.

a. Two-wire type (mains) plug.
b. Three-wire grounding type (mains) plug with a

grounding terminal.
This plug will only fit into a grounding type power
outlet.

Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from
the product.

For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to
lightning and power-line surges.

Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.

Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.

Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.

Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into

the product.

c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following

the operating instructions. Adjust only those controls
that are covered by the operating instructions, as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.

e. If the product has been dropped or damaged in any

way.

f. When the product exhibits a distinct change in

performance, this indicates a need for service.

When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.

Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.

This product should be mounted to a wall or ceiling only as
recommended by the manufacturer.

This product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.

Electrical energy can perform many useful functions. This product has been engineered and manufactured to
assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic
rules for its installation, use and servicing.

■ Potential hazard of glass particles if

lamp ruptures. In case of lamp rupture,
contact your nearest Sharp Authorized
Projector Dealer or Service Center for
a replacement.
See “Replacing the Lamp” on page 

■ For minimal servicing and to maintain high image qual-

ity, SHARP recommends that this projector be installed
in an area free from humidity, dust and cigarette smoke.
When the projector is subjected to these environments,
the lens must be cleaned more often. As long as the
projector is regularly cleaned, use in these environ-
ments will not reduce the overall operation life of the
unit. Internal cleaning should only be performed  by a
Sharp Authorized Projector Dealer or Service Center.

■ Position the screen so that it is not in direct sunlight or

room light. Light falling directly on the screen washes
out the colors, making viewing difficult. Close the cur-
tains and dim the lights when setting up the screen in a
sunny or bright room.

■ Placement should be within ±12 degrees of horizontal.

■ Take care with the lens so as not to hit or damage the

surface of the lens.

■ Continuously watching the screen for long hours will

cause eye strain. Be sure to occasionally rest your eyes.

■ The operating temperature of the projector is from 41°F

to 95°F (+5°C to +35°C).

■ The storage temperature of the projector is from

–4°F to 140°F (–20°C to +60°C).

■ Allow at least 7 

7

/

8

 inches (20 cm) of space between

the exhaust vent and the nearest wall or obstruction.

■ Be sure that the intake vent and the exhaust vent are

not obstructed.

■ If the cooling fan becomes obstructed, a protection cir-

cuit will automatically put the projector into the standby
mode. This does not indicate a malfunction. Remove
the projector power cord from the wall outlet and wait
at least 10 minutes. Place the projector where the in-
take and exhaust vents are not blocked, plug the power
cord back in and turn on the projector. This will return
the projector to the normal operating condition.

■ When transporting the projector, be sure not to subject

it to hard impact and/or vibration, as this can result in
damage. Take extra care with the lens. Before moving
the projector, be sure to unplug the power cord from
the wall outlet, and disconnect any other cables con-
nected to it.

■ Do not carry the projector by holding the lens.

■ When transporting the projector, be sure to attach the

lens shipping block and the lens cap to the projector.

■ When connecting a computer or other audio-visual

equipment to the projector, make the connections AF-
TER unplugging the power cord of the projector from
the AC outlet and turning off the equipment to be con-
nected.

■ Please read the operation manuals of the projector and

the equipment to be connected for instructions on how
to make the connections.

■ The power supply voltage and the shape of the plug

may vary depending on the region or country you are
using the projector in. When using the projector over-
seas, be sure to use an appropriate power cord for the
country you are in.

■ If the projector starts to overheat

due to setup problems or blockage
of the air vents, “

” and “

”

will illuminate in the lower left cor-
ner of the picture. If the temperature continues to rise, the
lamp will turn off, the temperature warning indicator on
the projector will blink, and after a 90-second cooling-off
period the projector will enter the standby mode. Refer to
“Maintenance Indicators” on page 

for details.

•

The cooling fan regulates the internal temperature, and

its performance is automatically controlled. The sound
of the fan may change during projector operation due
to changes in the fan speed. This does not indicate
malfunction.

•

Do not unplug the power cord during projection or cool-

ing fan operation. This can cause damage due to rise
in internal temperature, as the cooling fan also stops.

BQC-PGB10S//1

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4 Double click the “ACROBAT” folder.
5 Double click the language (name of the folder)

that you want to install.

6 Double click the installation program and

follow the instructions on the screen.

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3 Double click the “ACROBAT” folder.
4 Double click the language (name of the folder)

that you want to install.

5 Double click the installation program and

follow the instructions on the screen.

For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com).

For other languages:
If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please
download the appropriate version from the Internet.

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4 Double click the “MANUALS” folder.
5 Double click the language (name of the

folder) that you want to view.

6 Double click the “B10” pdf file to access the

projector manuals.

Note

•

If the desired pdf file cannot be opened by double clicking the mouse, start Acrobat Reader first, then
specify the desired file using the “File”, “Open” menu.

•

See the “readme.txt” file on the CD-ROM for important information not included in this operation manual.

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3 Double click the “MANUALS” folder.
4 Double click the language (name of the

folder) that you want to view.

5 Double click the “B10” pdf file to access the

projector manuals.