Sharp PG-A20X (serv.man24) User Manual / Operation Manual ▷ View online
Introduction
-13
Using the Remote Control
Inserting the Batteries
The batteries (two R-6 batteries (“AA” size, UM/
SUM-3, HP-7 or similar)) are supplied in the
package.
SUM-3, HP-7 or similar)) are supplied in the
package.
1
Press the
▲ mark on the cover
and slide it in the direction of the
arrow.
arrow.
2
Insert the batteries.
• Insert the batteries making sure the po-
larities correctly match the
and
marks inside the battery compartment.
3
Attach the cover and slide it un-
til it clicks into place.
til it clicks into place.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
• Insert the batteries making sure the polarities correctly match the and marks inside the battery compart-
ment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak.
Battery fluid from leaked batteries is harmful to skin, therefore be sure to first wipe them and then remove them
using a cloth.
using a cloth.
• The batteries included with this projector may run down in a short period, depending on how they are kept. Be
sure to replace them as soon as possible with new batteries.
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
Usable Range
■ The remote control can be used to control
the projector within the ranges shown in
the illustration.
the illustration.
Note
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control:
• Be sure not to drop, expose to moisture or high
temperature.
• The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
jector away from the fluorescent lamp.
23' (7 m)
30
°
30
°
45
°
Remote control
Remote control sensor
Remote
control
signal
transmitters
control
signal
transmitters
PG-A20X_E_PDF_P06_14.p65
03.4.23, 9:55 AM
13
-14
Accessories
Remote control
RRMCGA187WJSA
RRMCGA187WJSA
Two R-6 batteries
(“AA” size, UM/SUM-3, HP-7 or similar)
(“AA” size, UM/SUM-3, HP-7 or similar)
Power cord
*
For U.S., Canada, etc.
(6' (1.8 m))
QACCDA016WJPZ
(6' (1.8 m))
QACCDA016WJPZ
For Europe, except U.K.
(6' (1.8 m))
QACCVA006WJPZ
(6' (1.8 m))
QACCVA006WJPZ
*
Use the power cord that corresponds to the wall outlet in your country.
■ 3 RCA to 15-pin D-sub cable (9'10'' (3.0 m))
AN-C3CP
■ Computer RGB cable (32'10'' (10.0 m))
AN-C10BM (15-pin mini D-sub male connector)
■ 5 BNC to 15-pin D-sub cable (9'10'' (3.0 m))
AN-C3BN
■ DIN-D-sub RS-232C adaptor (5
57
/
64
'' (15 cm))
AN-A1RS
■ RS-232C serial control cable (32'10" (10.0 m))
AN-C10RS
■ Remote receiver
AN-MR1EL
Note
•
Some of the cables may not be available depending on the region. Please check with your nearest Sharp
Authorized Projector Dealer or Service Center.
Authorized Projector Dealer or Service Center.
Projector manual and
technical reference
CD-ROM
UDSKAA037WJZZ
technical reference
CD-ROM
UDSKAA037WJZZ
(1)
(2)
(3)
(4)
Extra air filter
PFILDA008WJZZ
PFILDA008WJZZ
Lens cap (attached)
CCAPHA012WJ01
CCAPHA012WJ01
Supplied accessories
Optional accessories
RGB cable
(9'10" (3.0 m))
QCNWGA012WJPZ
(9'10" (3.0 m))
QCNWGA012WJPZ
For U.K., Hong Kong and
Singapore
(6' (1.8 m))
QACCBA015WJPZ
Singapore
(6' (1.8 m))
QACCBA015WJPZ
For Australia, New
Zealand and Oceania
(6' (1.8 m))
QACCLA005WJPZ
Zealand and Oceania
(6' (1.8 m))
QACCLA005WJPZ
Carrying case
GCASNA006WJSA
GCASNA006WJSA
“QUICK GUIDE” label
TLABZA191WJZZ
TLABZA191WJZZ
Operation manual
(this manual)
(this manual)
Connections and Setup
-15
Connecting the Projector to Other Devices
Before Connecting
Note
•
Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the
devices to be connected. After making all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
devices to be connected. After making all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
•
Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
A computer using:
■ An RGB cable and a ø3.5 mm audio cable (commercially
available) (See page
16
.)
■ A DIN-D-sub RS-232C adaptor and an RS-232C
serial control cable (AN-C10RS) (sold separately)
(See page
(See page
20
.)
Component video or audio-visual equipment:
■ A VCR, Laser disc player or other audio-visual
equipment (See page
18
.)
■ A DVD player or DTV
*
decoder (See page
19
.)
*
DTV is the umbrella term used to describe the new
digital television system in the United States.
Connecting the Power
Cord
Cord
Plug the supplied power cord into
the AC socket on the rear of the pro-
jector.
the AC socket on the rear of the pro-
jector.
Power cord
Supplied
accessory
accessory
-16
Connecting the Projector to a Computer
Connecting the thumbscrew cables
■ Connect the thumbscrew cable making sure that it
fits correctly into the terminal. Then, firmly secure
the connectors by tightening the screws on both
sides of the plug.
the connectors by tightening the screws on both
sides of the plug.
■ Do not remove ferrite cores attached to the RGB
cable.
Ferrite core
Connecting to a Computer
Using the RGB Cable
Using the RGB Cable
1
Connect the projector to the
computer using the supplied
RGB cable.
computer using the supplied
RGB cable.
•
Secure the connectors by tightening the
thumbscrews.
thumbscrews.
2
To input an audio signal, connect
the projector to the computer using
a ø3.5 mm audio cable (commer-
cially available or available as Sharp
service part QCNWGA013WJPZ).
the projector to the computer using
a ø3.5 mm audio cable (commer-
cially available or available as Sharp
service part QCNWGA013WJPZ).
Note
•
When connecting the projector to a com-
puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page
puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page
37
.
•
See page
62
“Computer Compatibility
Chart” for a list of computer signals com-
patible with the projector. Use with computer
signals other than those listed may cause
some of the functions to not work.
patible with the projector. Use with computer
signals other than those listed may cause
some of the functions to not work.
•
A Macintosh adaptor may be required for
use with some Macintosh computers. Con-
tact your nearest Sharp Authorized Projec-
tor Dealer or Service Center.
use with some Macintosh computers. Con-
tact your nearest Sharp Authorized Projec-
tor Dealer or Service Center.
•
Depending on the computer you are using,
an image may not be projected unless the
signal output setting of the computer is
switched to the external output. Refer to the
computer operation manual for switching the
computer signal output settings.
an image may not be projected unless the
signal output setting of the computer is
switched to the external output. Refer to the
computer operation manual for switching the
computer signal output settings.
Supplied
accessory
accessory
Connecting the Projector to Other Devices
RGB cable
Computer
2
ø3.5 mm audio cable
(commercially available or
available as Sharp service
part QCNWGA013WJPZ)
(commercially available or
available as Sharp service
part QCNWGA013WJPZ)
1
RGB cable
To RGB output terminal
To audio output terminal
Click on the first or last page to see other PG-A20X (serv.man24) service manuals if exist.