Sharp PG-A10X (serv.man34) User Manual / Operation Manual ▷ View online
Easy to Use Functions
-45
Video System
(Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select “Video System” on the “Options” menu
and the appropriate video system.
and the appropriate video system.
Description of Video Systems
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
• In “Auto”, images are displayed in PAL even if
PAL-N or PAL-M input signals are received.
Background
(Selecting a
Startup and Background Image)
Select “Background” on the “Options” menu
and the image displayed upon the projector’s
startup and when no signal is being sent to
the projector.
and the image displayed upon the projector’s
startup and when no signal is being sent to
the projector.
Description of Background Images
Note
• If the input signal has interference, the screen
will be displayed during interference.
Eco Mode
(Setting the Eco
Mode)
Select “
” (Eco Mode) or “
” (Standard
Mode) in “Eco Mode” on the “Options”
menu.
menu.
Description of Eco Mode
Note
• Although lamp life and noise are improved when
“Eco Mode” is set to “
” (Eco mode), bright-
ness decreases by 20%.
• “Eco Mode” mode is factory preset to “
” (Stan-
dard mode).
Sharp
Blue
None
Blue
None
Selectable settings
PAL
SECAM
NTSC4.43
NTSC3.58
Description
When connected to PAL video
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
Selectable settings
Sharp
Blue
None
Description
SHARP default image
Blue screen
Black screen
Brightness
80%
100%
Selectable settings
(Eco mode)
(Standard mode)
Power consumption
(When using AC 100V)
190 W
240 W
Lamp
life
4,500 hours
3,000 hours
-46
Auto Power Off
(Auto
Power Off Function)
When no input signal is detected for more than 15
minutes, the projector will automatically power off
if set to “ON”.
The Auto Power Off function will be disabled if it
has been set to “OFF”.
minutes, the projector will automatically power off
if set to “ON”.
The Auto Power Off function will be disabled if it
has been set to “OFF”.
Select “
” (ON) or “
” (OFF) in “Auto
Power Off” on the “Options” menu.
Note
• When the Auto Power Off function is set to “ON”,
5 minutes before the power turns off, the mes-
sage “Power OFF in X min.” will appear on the
screen to indicate the remaining minutes be-
fore power off.
sage “Power OFF in X min.” will appear on the
screen to indicate the remaining minutes be-
fore power off.
Menu Position
(Selecting
the Menu Screen Position)
Select “Menu Position” on the “Options”
menu and the desired position for the menu
screen.
menu and the desired position for the menu
screen.
Description of Menu Positions
Menu Color
(Selecting the
Menu Color)
Select “
” (Opaque) or “
” (Translucent)
in “Menu Color” on the “Options” menu.
Description of Menu Colors
Using the “Options” Menu
Selectable settings
Center
Upper Right
Lower Right
Upper Left
Lower Left
Upper Right
Lower Right
Upper Left
Lower Left
Description
Displayed on the center of the image.
Displayed on the upper right of the image.
Displayed on the lower right of the image.
Displayed on the upper left of the image.
Displayed on the lower left of the image.
Displayed on the upper right of the image.
Displayed on the lower right of the image.
Displayed on the upper left of the image.
Displayed on the lower left of the image.
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Selectable settings
Opaque
Translucent
Translucent
Description
The menu is displayed opaquely.
The menu is displayed translucently.
The part of the menu on the image
becomes transparent.
The menu is displayed translucently.
The part of the menu on the image
becomes transparent.
Easy to Use Functions
-47
Password
(Setting a Pass-
word)
A password must be set to activate the “Anti-Theft”
function (Page
function (Page
48
).
There is no factory preset for the password or the
“Anti-Theft” settings. In this way, anyone can freely
set a new password and “Anti-Theft” settings. It is
therefore recommended that even if you do not want
to use the “Anti-Theft” function, you at least set a
password to prevent others from setting the “Anti-
Theft” function.
A password can only be set by using the remote
control.
“Anti-Theft” settings. In this way, anyone can freely
set a new password and “Anti-Theft” settings. It is
therefore recommended that even if you do not want
to use the “Anti-Theft” function, you at least set a
password to prevent others from setting the “Anti-
Theft” function.
A password can only be set by using the remote
control.
Select “Password” on the “Options” menu,
then press
then press
and follow the procedure be-
low to enter the password.
1
Press '
'
'
'
' or "
"
"
"
" to select the desired
number and then press |
|
|
|
|.
2
Enter the 3 remaining digits and
press
press
.
3
Enter the password again in “Recon-
firm” and press
firm” and press
.
Note
• When a password is set, you need to enter the
password to change the “Anti-Theft” setting.
If you want to change the password, follow
the procedure below.
the procedure below.
1
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to enter the pass-
word in “Old Password” and press
.
2
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to set the new
password and press
.
3
Enter the new 4-digit password
again in “Reconfirm” and press
again in “Reconfirm” and press
.
Note
• If you do not want to set a password, leave the
fields in steps 2 and 3 blank and press
.
• To cancel the password settings, press
.
If You Forget Your Pass-
word
word
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
lowing procedure and set a new password.
Press
Note
• You can only use the buttons on the projector
to delete the password.
• The password cannot be deleted using the
above described procedures while the “Anti-
Theft” function is set. If you forget your pass-
word while the “Anti-Theft” function is activated,
you will need to contact your nearest Sharp Au-
thorized Projector Dealer or Service Center (see
page
Theft” function is set. If you forget your pass-
word while the “Anti-Theft” function is activated,
you will need to contact your nearest Sharp Au-
thorized Projector Dealer or Service Center (see
page
65
). You may need to bring your projector
to them to restore the projector to original fac-
tory condition (password and keycode reset).
tory condition (password and keycode reset).
-48
Anti-Theft
(Setting the Anti-Theft)
The anti-theft function prevents unauthorized use
of the projector. You can choose to use this func-
tion or not. If you do not want to use this function,
just do not enter the keycode. Once the anti-theft
function is activated, users will need to enter the
correct keycode each time the projector is turned
on. Failure to enter the correct keycode will cause
images to not be projected. The following proce-
dures explain how to use this function.
of the projector. You can choose to use this func-
tion or not. If you do not want to use this function,
just do not enter the keycode. Once the anti-theft
function is activated, users will need to enter the
correct keycode each time the projector is turned
on. Failure to enter the correct keycode will cause
images to not be projected. The following proce-
dures explain how to use this function.
Select “Anti-Theft” on the “Options” menu,
then press
then press
and follow the procedure be-
low to enter the keycode.
Note
• “Anti-Theft” cannot be selected unless
“Password” is set. (See page
47
.)
• When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode after
the right password is entered.
the right password is entered.
Info
• Once the function is activated, you must remem-
ber the correct keycode. We suggest you record
the keycode in a safe place where only authorized
users have access. If you lose or forget your
keycode, you will need to contact your nearest
Sharp Authorized Projector Dealer or Service Cen-
ter (see page
the keycode in a safe place where only authorized
users have access. If you lose or forget your
keycode, you will need to contact your nearest
Sharp Authorized Projector Dealer or Service Cen-
ter (see page
65
). You may need to bring your pro-
jector to them to restore the projector to original
factory condition (password and keycode reset).
factory condition (password and keycode reset).
Using the “Options” Menu
1
Press any button you like on the re-
mote control or projector to set the
first digit in “New Code”.
mote control or projector to set the
first digit in “New Code”.
Note
• The following buttons on the remote con-
trol and projector cannot be set as
keycodes:
• POWER ON/OFF buttons
keycodes:
• POWER ON/OFF buttons
• ENTER button
• UNDO button
• MENU button
• FORWARD button
• BACK button
2
Enter the remaining 3 digits by
pressing any buttons you like.
pressing any buttons you like.
3
Enter the same keycode once more
in “Reconfirm”.
in “Reconfirm”.
Info
When “Anti-Theft” is set, the keycode in-
putting box appears after the power is
turned on. When it appears, enter the right
keycode.
putting box appears after the power is
turned on. When it appears, enter the right
keycode.
• Press the buttons on the remote control if the
buttons on the remote control are used for set-
ting the keycode. In the same manner, press
the buttons on the projector if the buttons on
the projector are used for setting the keycode.
ting the keycode. In the same manner, press
the buttons on the projector if the buttons on
the projector are used for setting the keycode.
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Click on the first or last page to see other PG-A10X (serv.man34) service manuals if exist.