Sharp MX-M904 / MX-M1204 (serv.man2) Handy Guide ▷ View online
SHARP
MAINTENANCE
25
Every
500K
Every
1000K
Every
3000K MX-ST10 Large Capacity Stacker
Check/Clean ALL Paper Path Sensors & Transport Rollers.
x
Lubricate Stack Drive Worm Gear Section every 1000K.
x
Replace Paddle Shaft Assembly
[00Q072M00620/]
every 1000K.
MX-FN21 & MXFN22 (Saddle) Finishers (4K)
Check/Clean Discharge Needle – replace every 1000K:-
[0CWFC93335001]
Check Oscillation Guide Discharge Needle (Front/Rear) – replace every 1000K:-
[0CWFC93151001 & 0CWFC93150001]
Clean Upper Bundle Exit Rollers (Front & Rear)
[0CWFC93148001 x2]
Clean Bundle Exit Centre Roller
[0CWFC93149001]
X
Replace Finisher Shutter Clutch every 1000K:-
[0CWFK28207001]
X
Replace Finisher Safety Switch2 Solenoid every 1000K:-
[0CWFK28206001]
X
Replace Paper Holder Torque Limiter every 1000K:-
[0CWFC93323001]
Clean Paper Return Rollers (Front & Rear) – Replace every 1000K:-
[0CWFM02388004 & 0CWFM02390004]
X
Replace Upper & Lower Tray Paper Holder Torque Limiters every 1000K:-
[0CWFC93111001 x 3]
Check Grid Lower Guide Section Discharge Needle – replace every 1000K:-
[0CWFL32575001] MX-FN21 only.
Check Shutter Torque Limiter – replace every 1000K:-
[0CWFC93559001] MX-FN21 only.
X
Replace Upper & Lower Tray Torque Limiters every 200K:-
[0CWFC93559001 x 2]
Check/Replace Paper Feed Dispose One Way Clutch every 1000K:-
[0CWFC93119001]
Check/Replace Saddle Joint Assembly One Way Clutch every 1000K bundles:-
[0CWFU537280//] MX-FN22 only
Check/Replace Saddle Paper Delivery One Way Clutch every 1000K bundles:-
[0CWFC927540//] MX-FN22 only
Clean Saddle Adjustment Roller – replace every 1000K bundles:-
[0CWFC874950// x 4] MX-FN22 only
Clean Saddle Roller – replace every 1000K bundles:-
[0CWFL320100// x 2] MX-FN22 only
Replace Main Staple Unit every 50K staples:-
[0CWFM023520//]
Replace the Saddle Staple Unit every 100K staples:-
[0CW4F513130//]
MX-TM10 Trimmer Unit
Check/Replace Paddle Solenoid when Trimmer counter reaches 120K cuts.
[0CWFK281820//]
Check Static Charge Eliminator (Discharge Needle) – replace when Trimmer
counter reaches 120K cuts:-
counter reaches 120K cuts:-
[0CWFL333330//]
Check Delivery Lower Path Guide (Moquette) – replace when Trimmer counter
reaches 120K cuts
reaches 120K cuts
[0CWFL333320//]
Replace Cutter Assembly Unit
[0CWFM402180//]
when Trimmer counter
reaches 50K cuts.
MAINTENANCE
SHARP
26
Every
500K
Every
1000K
Every
3000K MX-FN24 Finisher, MX-FN25 Saddle Finisher
(90cpm only)
Check/Replace the Offset Tray Drag (Shift Sponge) Rollers when the Total
Counter reaches 500k
Counter reaches 500k
[0PPB4783503// x 2]
Check/Replace Staple Unit (edge binding) when Staple Counter reaches 500k
[0PPAJ011015//]
Check/Replace Saddle Staple Unit (centre binding) when Saddle Staple Counter
reaches 200k
reaches 200k
[0PPB7007852// x 1 set]
x
x
Check the Shift (Positioning) Roller when the Total Counter reaches 2500K –
replace if worn
replace if worn
[0PPB4082435// x 1]
SHARP
OPERATING SYSTEM SUPPORT
27
MX-M904
MX-M1205
WINDOWS OS
WINDOWS SERVER
APPLE OSX
10
32/64
8, 8.1
32/64
7, Vista
32/64
2008(R2)
32/64
2012
64
2012R2
64
10.4 to
10.10.x
10.11.x
PRINTER DRIVER:
SHARP ADVANCED
PRINTER LANGUAGE
PCL6
WHQL
WHQL
WHQL
WHQL
WHQL
WHQL
PS
WHQL
WHQL
WHQL
WHQL
WHQL
WHQL
PPD
WHQL
WHQL
WHQL
WHQL
WHQL
WHQL
UPD2
WHQL
WHQL
WHQL
WHQL
WHQL
WHQL
XPS
*V
WHQL
PC-FAX
*1
*1
*1
*1
*1
*1
SAP
Use SH1DP010 (PCL) or SH1HP010 (PS) Device Type
AIRPRINT [NATIVE]
IMAGE SEND:
TWAIN SCAN
WHQL
WHQL
WHQL
WHQL
WHQL
WHQL
SCAN TO FOLDER
*2
*2
SCAN TO FTP
SHARPDESK
V3.5:
SCAN TO DESKTOP
*3
*3
*3
COMPOSER
*3
*3
*3
UTILITY:
SRDM v2.3.3
Notes:
*1
MX-FX11 is required [MX-M904/1054/1204 series only].
*2
For MX-M904/1054/1204 only, supported on Mac OSX 10.4 to 10.9 therefore, operation is not
guaranteed.
*3
Sharpdesk is supported on MX-M904/1054/1204 series only.
*V
XPS Driver is only supported on Windows Vista (32/64bit) – MX-PUX1 is required.
OPERATING SYSTEM SUPPORT
SHARP
28
MX-PE11
WINDOWS OS
WINDOWS SERVER
APPLE OSX
10
32/64
8, 8.1
32/64
7, Vista
32/64
2008(R2)
32/64
2012
32/64
2012R2
32/64
10.4 to
10.10.x
10.11.x
PRINTER DRIVER:
SHARP ADVANCED
PRINTER LANGUAGE
PCL6
PS
PPD
*1
*1
UPD2
XPS
PC-FAX
SAP
AIRPRINT [NATIVE]
IMAGE SEND:
FIERY SCAN
SCAN TO FOLDER
SCAN TO FTP
SHARPDESK
V3.5:
SCAN TO DESKTOP
COMPOSER
EFI FIERY:
FIERY SYSTEM
*2
EXT. APPLICATIONS
V4.4 SP2
UTILITY:
SRDM
Notes:
*1
Supported from Mac OSX 10.7 onwards only.
*2
MXPE11 Fiery System is supported on Windows 8.1 platform only therefore, do not upgrade the host
Operating System to Windows 10.
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man2) service manuals if exist.