Sharp MX-M700U (serv.man3) Service Manual ▷ View online
: Feb. 9 2004
2
AR-M550/M620/M700 MECHANICAL COUNTER INSTALLATION 11 - 1
[11] MECHANICAL COUNTER
INSTALLATION
NOTE: The mechanical counter (KCOUM0027FCZZ) is treated as a
service part. When ordering, order as a service part.
1) Open the front cabinet of the main unit, and cur off the counter
cover with a cutter and pliers.
2) Connect the connector on the mechanical counter side with the
connector on the main unit side.
3) Insert the mechanical counter into the main unit and fit it securely.
: Feb. 9 2004
2
AR-M550/M620/M700 DRY HEATER INSTALLATION 12 - 1
[12] DRY HEATER INSTALLATION
1. Dry heater switch and dehumidifying
heater relay PWB installation
1) Cut off the slit cover with nippers, and install the dehumidifying
heater switch.
2) Remove the rear cabinet.
3) Install the supporter and install the dehumidifying heater relay
PWB.
4) Connect the ACWH harness and pass it through the wire saddle.
2. Scanner dry heater installation
1) Loosen the screw, and push down the metal fixture.
2) Open the SPF, and slide the SPF drop-prevention stopper pin of
the hinge L to the drop-prevention position.
No.
Part name
Part code
Q’ty
1
Dehumidifying heater switch
QSW-C1030QCZZ
1
2
Supporter
LSUPP0118FCZZ
4
3
Dehumidifying heater relay PWB
CPWBF1569FCE1
1
4
ACWH harness
DHAI-3525FCZZ
1
1
2
2
2
3
No.
Part name
Part code
Q’ty
1
Scanner dry heater (120V)
RHETP0113FCZZ
1
Scanner dry heater (230V)
RHETP0105FCZZ
2
Screw (M3 x 4S tight)
XHBSD30P04000
2
3
Clamp (HP-4N)
LBNDJ0002FCZZ
2
4
Screw (M3 x 8)
XHBSD30P08000
2
5
Clamp (YMC-15-00)
LHLDW7003XCZZ
6
6
SCN WH harness
DHAI-3540FCZZ
1
4
: Feb. 9 2004
2
AR-M550/M620/M700 DRY HEATER INSTALLATION 12 - 2
3) Remove the white reference glass unit, and remove the table glass.
4) Remove the dark box.
5) Remove the screws.
6) Install the scanner dry heater.
7) Install the clamp, connect the SCN WH harness, and pass it
through the clamp and fix with the snap band.
8) Install the clamp, and install the dark box to the scanner base plate.
NOTE: When installing the dark box, check to insure that the blade
spring is in the original position.
9) Pass the SCN WH harness through the clamp and fix it with the
snap band. Connect the connector.
2
4
3
4
2
1
3
5
5
6
5
5
5
: Feb. 9 2004
2
AR-M550/M620/M700 DRY HEATER INSTALLATION 12 - 3
3. Dry heater (Paper feed trays 1, 2)
installation
1) Pull out the paper feed tray until it stops.
2) Slightly lift the paper feed tray and remove it diagonally from the
right side.
3) Install the dry heater (paper feed trays 1, 2) unit.
4) Fix the harness with the snap band, and pass it through the edge
saddle.
5) Connect the connector to the dehumidify8ing heater relay PWB.
4. Dry heater (paper feed trays 3, 4)
installation
1) Open the left under cabinet.
No.
Part name
Part code
Q’ty
1
Heater mounting plate
LPLTM6089FCZZ
1
2
Heater harness sheet
PSHEZ5135FCZZ
1
3
Dry heater (120V)
(Paper feed trays 1, 2)
(Paper feed trays 1, 2)
RHETP0118FCZZ
1
Dry heater (230V)
(Paper feed trays 1, 2)
(Paper feed trays 1, 2)
RHETP0123FCZZ
4
Screw (M3 x 8)
XHBSD30P08000
3
5
Heater cover
PCOVP1654FCZ1
1
6
Heater cover sheet
PSHEZ5012FCZZ
1
7
Heat-resistant clamp
LHLDW0433FCZZ
1
8
Screw (M4 x 8)
XHBSE40P08000
1
8
1
6
5
3
4
4
2
7
No.
Part name
Part code
Q'ty
1
Heater mounting plate
LPLTM6021FCZZ
1
2
Edge saddle (EH11)
LHLDW1285FCZZ
1
3
Heater radiating fin
PRDAR0087FCZZ
1
4
Dry heater (120V)
(Paper feed trays 3, 4)
(Paper feed trays 3, 4)
RHETP0117FCZZ
1
Dry heater (230V)
(Paper feed trays 3, 4)
(Paper feed trays 3, 4)
RHETP0122FCZZ
5
Screw (M3 x 4)
XHBSE30P04000
4
6
Screw (M3 x 6)
XHBSD30P06000
2
Click on the first or last page to see other MX-M700U (serv.man3) service manuals if exist.