DOWNLOAD Sharp MX-M623U / MX-M753U (serv.man7) Service Manual ↓ Size: 13.53 MB | Pages: 104 in PDF or view online for FREE

MX-M753N  AR-PF1  19 – 2

• If the fax box unit is installed, carry out steps 1) and 2).
1)

Pass the interface cable through the hole of the sheet metal of
the control PWB, connect it to the control PWB.

2)

Attach the snap band to the sheet metal of the control PWB
unit.

3)

Push the control PWB unit into the main unit.

4)

Secure the unit with the four screws.

• If the fax box unit is installed, carry out step 5).

5)

Fit the interface cable into the right cabinet upper.

6)

Attach the right cabinet upper to the main unit.

7)

Secure the right cabinet upper with the three screws.

• Reconnect the cables that have been removed in step B to the

original positions of the control PWB unit.

1)

Insert the power plug of the main unit to the outlet.

2)

Turn on the main power switch.

3)

Turn on the power switch located on the operation panel.

1)

PCL expansion font list check
Select the PCL expansion font list by the procedures described
in the printer test page in the system setup guide.
Check to confirm that the barcode font list is printed.

1

Code128TT-Regular

2

Code128-NarrowTT-Regular

3

Code128-WideTT-Regular

4

Code39HalfInch-Regular

5

Code39OneInch-Regular

6

Code39QuarterInch-Regular

7

Code39SmallHigh-Regular

8

Code39Slim-Regular

9

Code39SmallLow-Regular

10

Code39SmallMedium-Regular

11

Code39Wide-Regular

12

Codabar-Regular

13

Interleaved2of5-Regular

14

Interleaved2of5-Thin-Regular

15

OCR-A

16

OCR-B

17

OCR-B-C39-Regular

18

UPC-Half

19

UPC-Half-Bars

20

UPC-HalfMusic

21

UPC-HalfNarrow

22

UPC-HalfThin

23

UPC-Tall-Regular

24

UPC-TallBarsThin-regular

25

UPC-TallMusicThin-Regular

26

UPC-TallNarrow-Regular

27

UPC-TallThin-regular

28

ZipCodeBarcode-Regular

ON

MX-M753N  MX-NSX1  20 – 1

MX-M753N

Service Manual

 

<Note before installation>
• To enable the network scanner function, the product key must be

acquired.

• For the models in which the printer and the network function can-

not be used, the expansion memory board must be installed in
advance. (Refer to the Operation Manual attached to the
machine and the Service Manual.)

1)

To enable the network scanner function, enter the product key
by the key operation of the operation panel.
a)

Touch [Product Key].

b)

Enter the product key with the 10-key, and touch [Submit]
key.

2)

After completion of the product key entry, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again.

1)

Perform Scan to Desktop to check the operation of the network
scanner function.

2)

Use the included CD-ROM (package part No. 1) to install the
software program of "Sharpdesk/Network Scanner Tool."
For the installing procedures, refer to the installation guide
(pakage part No. 3) included in the package. (For details, refer
to the installation guide in the included CD-ROM.)
* Installation and setup of the software program to the PC

must be performed by the user or by the serviceman under
consultation with the user.

3)

Set the destination profile by referring to the contents of the
Network Scanner Tool User’s Guide in the included CD-ROM,
and send image data. Check that the image data are properly
received.

1

CD-ROM

1

2

Product key sheet

1

3

Installation guide

1

MX-M753N  MX-AMX1  21 – 1

MX-M753N

Service Manual

 

<Note before installation>
To enable the Application Integration Module function, the product
key must be acquired.

1)

To enable the Application Integration Module function, enter
the product key by the key operation of the operation panel.
a)

Press the system setting key on the operation panel.

b)

Select page 2/2 of the system setting, and touch [Product
key input] key.

c)

Touch the input column.

d)

Enter the product key with numeric key (10-key), and
touch [Submit] key.

2)

After entering the product key information, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again. (For the models with the main power switch
only, turn OFF/ON the main power switch only.)

1)

Send image data and meta data by referring to MX-AMX1
GETTING STARTED GUIDE (included in package). Check to
confirm that image data and meta data are properly received.

1

CD-ROM

1

2

MX-AMX1 GETTING STARTED GUIDE

1

3

Sharpdesk license kit Operation Manual

1

1

2

3

MX-M753N  MX-AMX2  22 – 1

MX-M753N

Service Manual

 

<Note before installation>
* To enable the external account kit, the product key must be

acquired.

1)

Press the [SYSTEM SETTINGS] key.

2)

Touch the [Admin Password] key.

3)

Touch the [Password] key and enter the administrator pass-
word.

4)

Touch the [OK] key.

5)

Touch the [Product Key] key.
You may have to scroll down the screen to show this key.

6)

Touch the input column.

7)

Enter the product key with the 10-key, and touch [OK] key.

• The product key can be entered from the Web page. 

For details, refer to [HELP] on the right upper side of the Web
page.

1)

By performing procedure (1), "OSA setting" key is added to the
menu screen of the system setting or the key operator pro-
gram.

2)

When "OSA setting" key is touched, the menu below is dis-
played.

3)

When the [Default Display Setting] key is touched, the screen
for setting the default display that appears when the [DOCU-
MENT FILING] key is pressed will appear.
• To set the base screen of document filing as the default dis-

play, touch the [Document Filing] key.

• To set the external application selection screen as the

default display, touch the [OSA] key.

4)

After selecting the setting, touch the [OK] key.
• "Default Display Setting" also appears in "Document Filing

Settings" in the system settings (administrator).

• If the [CA] key is pressed in document filing mode or OSA

mode, the base screen of that mode will appear regardless
of the default display setting.

1)

Click the [Login] button that appears in the upper right-hand
corner of the Web page.

2)

Select [Administrator] in [Login Name] and then enter your
password.

3)

Click [External Applications Setup] in the menu frame.

4)

Configure the standard application settings.
• Up to 8 standard applications can be stored.
• For each setting item, refer to [Help].

1

CD-ROM

1

2

Operation manual

1

1

2