DOWNLOAD Sharp MX-M623U / MX-M753U (serv.man7) Service Manual ↓ Size: 13.53 MB | Pages: 104 in PDF or view online for FREE

MX-M753N  MX-FR22U  14 – 4

5)

After completion of reading, installation (update) of the firm-
ware is processed. 

* The code name of the firmware which is currently installed

(updated) is displayed sequentially on the right upper corner.

* The display may flash at a moment during installing (update)

procedures. This is a normal operation. 

6)

Check the result of installation (update) of the firmware.
By using [UP] key and [DOWN] key, the results of installation
(update) of all the firmware files. 

• OK: Update is successfully completed. 
• NG: Update is failed.
• Not Update: Update itself is not executed. 

Reason why Update is not executed: 
No option device for the target firmware is not installed. 

7)

Turn OFF the power to terminate the boot mode. 

8)

Turn ON the power, and enter the DSK product key. Then, turn
OFF/ON the power to boot the machine as a DSK-installed
machine.

Firm Update

IcuM

Writing Data

Firm Update

IcuM

Result : NG

Firm Update

IcuM

Result : OK

Firm Update

IcuM

Result : Not Update

MX-M753N  MX-PB13  15 – 1

MX-M753N

Service Manual

 

1)

To enable the MX-PB13, enter the product key by the key
operation of the copier machine.
a)

Press the system setting key on the operation panel.

b)

Select [Product key input] key display page, and touch the
key. 

c)

Touch the input column.

d)

Enter the product key with numeric key (10-key), and
touch [Registration] key.

2)

After completion of entry of the product key, turn OFF the
power switch on the operation panel. Turn OFF the main
power switch, then turn ON the power switch and the main
power switch again.

3)

Use the attached CD-ROM to install the driver.
For installing procedures, refer to the Start Guide.
Installation of the driver must be performed by the user or the
serviceman with assistance or the user.

1

CD-ROM (Driver)

1

2

Product key sheet (With Application Number)

1

1

2

APPLICATION
NUMBER

MACHINE
SERIAL
NUMBER

PRODUCT
KEY

Please keep below important information.
This information will use for other products.

MX-M753N  MX-PKX1  16 – 1

 

MX-M753N

Service Manual

 

NOTE:
• N model

To set up the PS driver, do not use the CD-ROM which is
included in the MX-PKX1 but use the PCL CD-ROM which is
included in the main unit.

• U model

In the case of the U model, the PCL CD ROM is not packed with
the main unit. It is packed with the optional printer expansion kit
MX-PB13.

NOTE: To enable PS3, the product key must be acquired. (For

details of the acquiring method of the product key, refer to
the distributor.)
Write down the acquired product key on the product key
sheet and pass it to the user.

1)

To enable PS3, enter the product key by the key operation of
the copier machine.
a) Touch [PRODUCT KEY INPUT].
b) Touch the input column.
c) Enter the product key with the 10-key, and touch [OK] key.

2)

After completion of the product key entry, turn OFF the power
switch and the main power switch and turn them ON.

1)

Print the test page in PS3 fonts by the key operation of the
operation panel. (Select the PS font list by the procedures
described in the data list print printer test page of the system
setup guide.)
Check to confirm that printing is made normally.

1

CD-ROM (For Screen Font)

1

2

Product key sheet

1

1

2

APPLICATION
NUMBER

MACHINE
SERIAL
NUMBER

PRODUCT
KEY

Please keep below important information.
This information will use for other products.

MX-M753N  MX-PUX1  17 – 1

MX-M753N

Service Manual

 

<Note before installation>
To enable XPS, an expansion memory (MX-SMX3) must be
installed.
To install an expansion memory, refer to the descriptions of "[18]
MX-SMX3" on this Installation manual.

1)

To enable XPS, enter the product key by the key operation of
the copier machine.
a)

Press the system setting key on the operation panel.

b)

Select page 2/2 of the system setting, and touch [Product
key input] key.

c)

Touch the input column.

d)

Enter the product key with numeric key (10-key), and
touch [Registration] key.

2)

After completion of entry of the product key, turn OFF the
power switch on the operation panel. Turn OFF the main
power switch, then turn ON the power switch and the main
power switch again.

3)

Use the CD-ROM packed together with the machine to install
the XPS driver.
For installing procedures, refer to the Start Guide.
Installation of the driver must be performed by the user or the
serviceman with assistance or the user.

1

CD-ROM

1

2

Operation manual

1

3

Product key sheet

1

1

2

3

APPLICATION
NUMBER

MACHINE
SERIAL
NUMBER

PRODUCT
KEY

Please keep below important information.
This information will use for other products.