Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man5) Handy Guide ▷ View online
Test Simulations
21
Document Solutions After Sales Service
Main Sub Functions
27
13
Check the history of paper transport time between sensors.
14
Set the FSS function connection test mode.
15
Display the FSS connection status.
16
Set the FSS alert send.
17
Set the FSS paper order alert.
18
Clear the FSS paper feed retry counter.
30
1
Check the operations of the sensors in other than the paper feed section.
2
Check the operations of the sensors and the detectors in the paper feed section
and the control circuits.
and the control circuits.
40
2
Manual paper feed tray paper width sensor adjustment.
7
Set the adjustment value of the manual paper feed tray paper width sensor.
41
1
Check the operations of the document size sensor and the control circuit.
2
Adjust the document size sensor detection level.
3
Check the operations of the document size sensor and the control circuit.
43
1
Set the fusing temperature in each mode.
4
Set the fusing temperature 2 in each mode.
10
Set the postcard feed cycle
20 Perform
the
low-temperature, low-humidity (L/L) environment correction for the
fusing temperature setting of each paper (SIM43-01).
22 Perform
the
low-temperature, low-humidity (L/L) environment correction for the
fusing temperature setting of each paper (SIM43-04).
44
1
Set each correction operation function in the image forming section.
9
Display the result data of the high density process control operation.
14
Display the output level of the temperature and humidity sensor.
43
Display the identification information of the developing unit.
46
2
Adjust the copy density in the copy mode.
4
Adjust the density in the image send mode.
5
Adjust the density in the image send mode.
8
Adjust the image send mode colour balance RGB.
9
Adjust the scan image density.19Used to set the operating conditions for the
density scanning (exposure) of monochrome auto copy mode documents.
density scanning (exposure) of monochrome auto copy mode documents.
30
Adjust the resolution in the sub scanning direction in the copy mode.
32
Adjust the document background density reproducibility in the monochrome auto
copy mode.
copy mode.
37
Adjust the reproduction capability of monochrome mode colour.
39
Adjust the sharpness of FAX send images.
40
Adjust the FAX send image density.
41
Adjust the FAX send image density. (Normal)
42
Adjust the FAX send image density. (Fine)
43
Adjust the FAX send image density. (Super Fine)
44
Adjust the FAX send image density. (Ultra fine)
45
Adjust the FAX send image density. (600dpi).
47
Set the compression rate of copy and scan images (JPEG).
Test Simulations
22
Document Solutions After Sales Service
Main Sub Functions
46 60 Adjust
the
sharpness
in
the colour auto copy mode.
61
Adjust the area separation recognition level.
62
Set the operating conditions of the ACS, the area separation, the background
image process, and the auto exposure mode.
image process, and the auto exposure mode.
63
Adjust the density in the copy low density section.
48
1
Adjust the scan image magnification ratio (main & sub scanning direction).
5
Correction the scan image magnification ratio (in the sub scanning
direction).Scanner section.
direction).Scanner section.
49
1
Perform the firmware update.
3
Update the operation manual in the HDD.
5
Perform the watermark update.
50
1
Copy image position, image loss adjustment
2
Adjust the copy image position and the image loss. (This simulation is a simplified
version of SIM 50-1.)
version of SIM 50-1.)
5
Adjust the print lead edge image position. (PRINTER MODE)
6
Adjust the copy image position and the image loss.
7
Adjust the copy image position and the image loss (RSPF mode). (This simulation
is a simplified version of SIM 50-6.)RSPF
is a simplified version of SIM 50-6.)RSPF
10
Adjust the black print image magnification ratio and the off-centre position. (The
adjustment is made separately for each paper feed section.)
adjustment is made separately for each paper feed section.)
12
Perform the scan image off-centre position adjustment. (The adjustment is made
separately for each scan mode.)
separately for each scan mode.)
27
Perform the image loss adjustment of scanned images in the FAX or image send
mode.
mode.
28
Automatically adjust the image loss, void area, image off-centre, and image
magnification ratio.
magnification ratio.
51
2
Adjust the contact pressure on paper by the main unit and the RSPF registration.
9
Adjust the ON/OFF timing of the separation voltage.
53
6
Adjust the detection level of the RSPF document width.
7
Adjust the RSPF document size width sensor.
8
Adjust the document lead edge reference and the RSPF mode document scan
position.
position.
55
1
Set the specifications of the engine control operations. (SOFT SW)
2
Set the specifications of the scanner control operation. (SOFT SW)
3
Set the specifications of the controller operation. (SOFT SW)
10
Set the special stamp text. (Taiwan only).
56
1
Transport data between HDD - MFP PWB SRAM/EEPROM.
2
Backup the data in the EEPROM. SD Card, and HDD (including user authentication
data and address data) to the USB memory.
data and address data) to the USB memory.
3
Backup the document filing data to the USB memory.
4
Backup the JOB log data to the USB memory.
Test Simulations
23
Document Solutions After Sales Service
Main Sub Functions
56 5 Import
the
SIM22-6
data to a USB memory in the TEXT format.
11
Save the data in the SD card to the HDD temporarily.
12
Copy the SD card data saved temporarily in the HDD with SIM56-11 to the
machine.
machine.
60
1
Check the memory operations (read/write) of the MFP PWB.
61
1
Check the LSU polygon motor rotation and laser detection.
3
Set the laser power
62
1
Format the hard disk. (HDD: Excluding the Op manual and watermark data)
2
Check read/write of the hard disk (partial).
3
Check read/write of the hard disk (all areas).
6
Perform the self diagnostics of the hard disk.
7
Print the hard disk self diagnostics error log.
8
Format the hard disk. (HDD: Excluding the Operation Manual, the watermark data,
and the system area)
and the system area)
10
Clear the job completion list data.
11
Delete the document filing data.
12
Set Enable/Disable of auto format in a hard disk trouble.
13
Used to format the hard disk. (Operation Manual, watermark data only)
14
Initialize (remake) only the database file of the HDD.
63
1
Display the shading correction result.
2 Perform
shading.
3
Perform scanner (CCD) colour balance and gamma auto adjustment.
4
Display the SIT chart patch density.
5
Perform the scanner (CCD) colour balance and gamma default setting.
64
2
Test print. (Self print) (Monochrome mode)
4
Printer test print. (Self print)
5 Printer
test
print.
(Self print) (PCL)
6
Printer test print. (Self print) (PS)
65
1
Adjust the touch panel (LCD display section) detection coordinates.
2
Display the touch panel (LCD display section) detection coordinates.
5
Check the operation panel key input.
66
1
Display the FAX-related soft SW (2 - 150) on the LCD.
2
Enter a country code and set the default value for the country code.
3
Check read/write of the EEPROM and the SDRAM on the MODEM controller and
display the result.
display the result.
4
Send the selected signals to the line and the main unit speaker. (Send level: max.)
5
Send the selected signal to the line and the main unit speaker. (Send level: Soft
SW setting) (For the kinds of send signals, refer to SIM66-04.)
SW setting) (For the kinds of send signals, refer to SIM66-04.)
6
Print the confidential registration check table (BOX NO., BOX name, passcode. (If
there is no confidential registration, no print is made.)
there is no confidential registration, no print is made.)
Test Simulations
24
Document Solutions After Sales Service
Main Sub Functions
66
7
Output all image data saved in the image memory.
8
Send the selected sound messages to the line and the speaker.
9
Send the selected sound message to the line and the speaker. (Send level: Soft
SW setting) * For details of sound messages, refer to the sound message table of
SIM66-08.FAX
SW setting) * For details of sound messages, refer to the sound message table of
SIM66-08.FAX
10
Clear the FAX and image send image data.
11
Send the selected signal at 300bps to the line and the speaker.
12
Send the selected signal at 300bps to the line and the speaker. (Send level: Soft
SW setting) * For the kings of send signals at 300bps, refer to SIM66-11, 300bps
send signal table.
SW setting) * For the kings of send signals at 300bps, refer to SIM66-11, 300bps
send signal table.
13
Register dial numbers for SIM66-14/15/16, Dial test. (Up to 20 digits can be
registered.)
registered.)
14
Execute the dial pulse (10PPS) send test and to adjust the make time.
15
Execute the dial pulse (20PPS) send test and to adjust the make time.
16
Execute the DTFM signal send test and to adjust the send level.
17
Send the DTMF signal to the line and the speaker. (Send level: Max.)
18
Send the DTMF signal to the line and the speaker. (Send level: Soft SW setting)
21
Print the selected items (system error, protocol monitor).
22
Set the handset sound volume. (This simulation can be executed even though the
handset setting is set to NO. When, however, the handset is not installed, the
sound volume cannot be checked.) (Japan model only)FAX
handset setting is set to NO. When, however, the handset is not installed, the
sound volume cannot be checked.) (Japan model only)FAX
24
Clear the FAST save data.
29
Initialize the telephone book data (the one-touch registration table, the
FTP/Desktop expansion table, the group expansion table, the program registration
table, the interface memory box table, the meta data, Inbound Routing, and the
Document Admin table).
FTP/Desktop expansion table, the group expansion table, the program registration
table, the interface memory box table, the meta data, Inbound Routing, and the
Document Admin table).
30
Display the TEL/LIU status change, The display is highlighted by status change.
31
Set ON/OFF the port for output to TEL/LIU.
32
Check the fixed data received from the line and to display the result.
33
Execute detection of various signals with the line connected and to display the
detection result. When a signal is detected, the display is highlighted.
detection result. When a signal is detected, the display is highlighted.
34
Used to execute the send test and display the time required for sending image data
in the test. Used to execute send test and display. (Unit: ms)
in the test. Used to execute send test and display. (Unit: ms)
36
Check send and receive data from the MODEM controller to the MFP controller or
the data line or the command line individually.
the data line or the command line individually.
39
Check and change the destination setting saved in EEPROM of the FAX BOX.
42
Rewrite the program to power control installed in the FAX BOX.
43
Write the adjustment value into the power control installed in the FAX BOX.
61
Display the FAX-related soft SW (151 - 250) on the LCD to allow changing the soft
SW while checking with the LCD.
SW while checking with the LCD.
62
Import the FAX receive data into a USB memory in PDF file type.
67 17 Printer
reset.
45 Adjust
the
printer
image filter and trapping.
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man5) service manuals if exist.