DOWNLOAD Sharp MX-M232D (serv.man3) Service Manual ↓ Size: 9.62 MB | Pages: 127 in PDF or view online for FREE

MX-M182 SIMULATIONS 7-53

66

04

Signal send mode
Used to send signals to the line and the machine speaker by setting the signal number. (Signal send is 
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from 
0db and the soft SW values. Since the level setting is not required for 1:NO SIGNAL and 31:PSEUDO RNG 
- 33:R.B.TONE NONE, the selection menu does not appear. The signal send level is returned to the soft SW 
set value before execution of the mode when completing the mode.

06

Confidential pass code print
Used to print the confidential ID table (confidential box number, confidential box name, confidential pass 
code).

07

Image memory content print
Used to print all the image data (confidential receive contents, remote send images, and images which are 
not sent yet) in the image memory of the FAX section. The printed images are remained in the memory after 
printing.

Main 
code

Sub 

code

Contents

Remark

Sim66-4 SIGNAL OUT

Sim66-4 SIGNAL OUT

Sim66-4 SIGNAL OUT

Sim66-4 SIGNAL OUT

Sim66-4 SIGNAL OUT

SIGNAL SELECT

(1 - 35) 

1:NO SIGNAL
2:33600bps(V34)
3:31200bps(V34)
(1 - 35) 

XX

After selection with numeric keys

[OK] key

[OK] key

[OK] key

[BACK] key

33600bps(V34)
1:MAX
2:SOFT SW.
(1 - 2) 

X

33600bps(V34)
0dB

 EXEC

33600bps(V34)
PRESS BACK TO STOP

 

EXEC

Sim66-4 SIGNAL OUT

34:DP MAKE
35:DP BREAK

(1 - 35) 

XX

After pressing 
[OK] key

SIM66-4 initial window

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input window
[C] key 

: Input clear

          key 

: Page select

Numeric keys 

: Number input and item selection

[OK] key 

: Input value settlement and execution

[START] key 

: Input value settlement

[BACK] key 

: Signal send stop

The window is switched with the up and down keys.
Input and switching the window are irrelevant.
Not highlighted with an input of a value.
The window is not switched, either.

When "1: NO SIGNAL" or "31: PSEUDO RNG" - "33: R.B. TONE NONE"
is selected, "0dB" and "SOFT SW" are not selected.
When one of these is selected, the second line is the signal name,
the third and fourth lines are empty, and the fifth line is EXEC display. 

1sec later

PRINT CONF.

               EXEC

PRINT CONF.

               EXEC

Sim66-6 PASS 

CODE

Sim66-6 PASS 

CODE

Sim66-6 PASS 

CODE

PRINT STORED

Sim66-6 PASS 

CODE

NO DATA

3sec later

In case of an error

[OK] key

Sim66-7 PRINT MEMORY

Sim66-7 PRINT MEMORY

Sim66-7 PRINT MEMORY

PRINT STORED

PRINT IMAGE MEMORY

               EXEC

NO DATA

Sim66-7 PRINT MEMORY

CAN NOT PRINT

(When there is no image memory)

[OK] key

[OK] key

[OK] key

1sec later

3sec later

3sec later

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input
  

window

[OK] key 

: Settlement

[START] key 

: Settlement

[C] key 

: Disable

[BACK] key 

: Disable

MX-M182 SIMULATIONS 7-54

66

10

Used to clear all the image data (including confidential receive contents) in the image memory of the FAX 
section. The management table is also cleared (initialized) at the same time.

11

Used to send the specified signal at the speed of 300bps by setting the signal number. (Signal send is 
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from 
0db and soft switch set values. The signal send level is returned to the sot SW set value before execution of 
the mode after completion of the mode.

Main 
code

Sub 

code

Contents

Remark

Sim66-10 IMAGE CLR

[OK] key

Sim66-10 IMAGE CLR

Sim66-10 IMAGE CLR

CLEAR IMAGE MEMORY

ARE YOU SURE?  EXEC

CLEAR IMAGE MEM.

 

EXEC

CLEARED IMAGE MEM.
DO POWER OFF

Sim66-10 IMAGE CLR

CLEARED

Power source OFF/ON

Simulation code input window

Completion 
of execution
(Highlighted 
 during execution)

Completion of execution
(Highlighted during execution)

After pressing 
[OK] key,
during execution

With prints

Without prints

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input
  

window

[OK] key 

: Settlement

[BACK] key 

: Simulation code input window

[START] key 

: Settlement

[C] key 

: Disable

[BACK] key

Sim66-11 300bps SIG.

Sim66-11 300bps SIG.

[OK] key

Sim66-11 300bps SIG.

Sim66-11 300bps SIG.

SIGNAL LEVEL
1:MAX
2:SOFT SW.
( 1 - 2 )  

X

1:NO SIG.  4:00000
2:11111 5:010101
3:11110 6:00001
( 1 - 6 )  

X

NO SIGNAL

 EXEC

SIM66-11 initial window

OUTPUTING SIGNAL
PRESS BACK TO STOP

 

EXEC

After selection with numeric keys

[OK] key

[OK] key

After selection
with numeric keys

After pressing [OK] key,
during execution

[BACK] key

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input window
[C] key 

: Input clear

          keys 

: Page switch

Numeric keys 

: Item selection

[OK] key 

: Input value settlement and execution

[START] key 

: Input value settlement

[BACK] key 

: Signal send stop

MX-M182 SIMULATIONS 7-55

66

13

Used to perform send test and adjustments of the dial pulse and the DTMF signal.
Perform send test of the dial pulse and the DTMF signal, and perform adjustments of the make time of the 
dial pulse and adjustments of the send level of the DTMF signal. 

17

Used to send the DTMF signal.

Main 
code

Sub 

code

Contents

Remark

[OK] key

[OK] key

[OK] key

[OK] key

[OK] key

[OK] key

[OK] key

[OK] key

SIM66-13 initial window

[INTERRUPT] key : Sub code input window
[C] key 

: Input clear

Numeric key 

: Input of time and dial number

 

  and selection of an item

[OK] key 

: Settlement and execution of an input

[START] key 

: Settlement of an input

[BACK] key 

: Returns to the selection window

XXXXXXXX : 

Input 

dial 

After selection
with numeric key

After selection
with numeric key

After selection 
with numeric key

The default is set to "1590."
Dial input (0 - 9, *, #)
When the value is great, scroll to the left. 
When [C] is pressed, all are cleared.

After pressing [OK] key, during execution

[OK] key

After pressing [OK] key, 
during execution

Sim66-13 DIAL TEST

After selection 
with numeric key

1.NormalMode
2.HandsetMode

( 1-2 ) 

X

When "2" is 
selected

[OK] key

Select with numeric keys and press [OK] key.

Sim66-13 DIAL TEST

DTMF HIGH:XX LOW:YY
INPUT DIAL #
   XXXXXXXXXXXXX
                               

EXEC

When "1" is 
selected

SIM66-13 initial window

When the soft SW and the SIM DTMF 
sound speaker are selected, "Normal" 
and "handset" are selected. In another 
case, this menu is not displayed. 

Set the signal send level to 0 
or to the soft SW setting 
value. 
(High group of DTMF signal 
send level)
*1 (Low group of DTMF 

signal send level)

Sim66-13 DIAL TEST

1:PULSE 10pps
2:PULSE 20pps
3:DTMF
( 1-3 ) 

X

Sim66-13 DIAL TEST

PULSE 10pps
INPUT MAKE TIME
 YY
( 26-41 ) 

YY

Sim66-13 DIAL TEST

SELECT HIGH LEVEL
1:DEFAULT
2:SOFT SW. 

Y

( 1-2 ) 

X

Sim66-13 DIAL TEST

Sim66-13 DIAL TEST

INPUT LOW LEVEL
DTMF    SOFT SW.
 

Y

( 0-15 ) 

XX

Select with numeric keys
and press [OK] key.

DTMF HIGH:XX LOW:YY
INPUT DIAL #
   XXXXXXXXXXXXX
 EXEC

Completion of execution
(Highlighted during execution)

Completion of execution
(Highlighted during execution)

SENDING 10 pps YYms
INPUT DIAL #
   XXXXXXXXXXXX
 

EXEC

Sim66-13 DIAL TEST

Sim66-13 DIAL TEST

SEND 10 pps 

YYms

INPUT DIAL #
   XXXXXXXXXXXXX
 EXEC

Sim66-13 DIAL TEST

PULSE 10pps 

 YYms

INPUT DIAL #
   XXXXXXXXXXXXX
 EXEC

The default is set to "1590."
Dial input (0 - 9, *, #)
When the value is great, 
scroll to the left. 
When [C] is pressed, all are 
cleared.

[OK] key

Sim66-17 DTMF SIG.

Sim66-17 DTMF SIG.

Sim66-17 DTMF SIG.

1:MAX
2:SOFT SW.

( 1-2 ) 

X

INPUT DIAL #
X

 EXEC

SIM66-17 initial window

[CA] key 

:  Simulation cancel

[INTERRUPT] key :  Sub code input window
[C] key 

:  Input clear and stop

Numeric keys 

:  Item selection, dial 

  

number 

input

[OK] key 

:  Input value settlement 

  

and 

execution

[START] key 

:  Input value settlement 

  

and 

execution

[BACK] key 

:  Signal send stop

After selection 
with numeric key

SENDING SIGNAL
X
PRESS BACK TO STOP
 

EXEC

Completion of execution 
(Highlighted during execution)

Set the signal send level to 
MAX or to the soft setting 
value.

Select the dial 
number to be sent. 
(1 dial)

The DTMF signal 
of the selected 
dial number is 
sent until the 
interruption 
command is 
delivered by 
pressing the stop 
key.

[OK] key

[BACK] key

After pressing [OK] key, 
during execution

MX-M182 SIMULATIONS 7-56

66

21

Used to print the following FAX information.

24

Used to clear the FAST SRAM data.

30

Used to display the change contents regardless of the soft SW setting when the status of the polarity 
inversion relay, the handset hook switch, or the external telephone hook switch is changed. The display of 
the changed status is remained until the interruption command is made by pressing RETURN key.

Main 
code

Sub 

code

Contents

Remark

Sim66-21 LIST

Sim66-21 LIST

Sim66-21 LIST

1:USER SW. LIST
2:SOFT SW. LIST
3:SYSTEM ERROR
(1 - 5) 

X

SOFT SW. LIST

 EXEC

PRINT  STORED

Sim66-21 LIST

4:PROTOCOL MONITOR
5:FAX SIMULATION

(1 - 5) 

X

[OK] key

[OK] key

[OK] key

Sim66-21 LIST

CAN NOT PRINT

Printer Error

After selection with numeric keys

After selection 
with numeric
keys

After pressing 
[OK] key,
during 
execution

1sec later

SIM66-21 window

1sec later

SIM66-21 window

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input window
Numeric key 

: Item selection

[OK] key 

: Settlement and execution

[START] key 

: Input value settlement and execution

[BACK] key 

: Returns to the selection window.

         keys 

: Page switch

[C] key 

: Disable 

Sim66-24 FAST CLEAR

Sim66-24 FAST CLEAR

[OK] key

Sim66-24 FAST CLEAR

INITIAL

 EXEC

INITIALIZED

Sim66-24 FAST CLEAR

Not Supported

FAST Correspond

FAST NO Correspond

INITIAL

 

EXEC

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input window
[OK] key 

: Settlement

[START] key 

: Settlement

[C] key 

: Disable

[BACK] key 

: Disable

After pressing 
[OK] key,
during 
execution

Completion of 
execution
(Highlighted during 
 execution)

1sec later

Simulation code input window

Sim66-30 TEL STAT.

Sim66-30 TEL STAT.

[OK] key

[BACK] key

SIM66-30 
initial window

 EXEC

HS2 :XXX  HS1  :XXX
RHS :XXX  EXHS :XXX
PRESS BACK TO STOP
 

EXEC

XXX: ON or OFF

[CA] key 

: Simulation cancel

[INTERRUPT] key : Sub code input window
[OK] key 

: Settlement

[BACK] key 

: Returns to the selection 

  

window

[START] key 

: Settlement

[C] key 

: Disable

After pressing 
[OK] key,
during 
execution