DOWNLOAD Sharp MX-C301 / MX-C301W (serv.man6) Service Manual ↓ Size: 3.33 MB | Pages: 28 in PDF or view online for FREE

MX-C301  MX-FR46U (DATA SECURITY KIT)  6 – 3

The following two functions are available in the boot mode.

There are two functions available in the boot mode. These modes
can be selected by pressing [MENU] key and [BACK] key.

1)

Boot the machine in the boot mode. When the Version Check
display is indicated, press [MENU] key, and the machine
enters the Firm Update mode.

2)

Insert the USB flash drive which includes the update firmware
file (SFU file) into the USB port of the machine, and press [OK]
key.

3)

Select the firmware file (SFU file) of the target.

Use [UP] key and [DOWN] key to select the target file.

When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)

When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.

4)

Press [OK] key.

The selected firmware file (SFU) is read. (It takes about 1 min-
ute.)

5)

After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)

- The abbreviated name of the firmware which is currently

installed (updated) is displayed sequentially.

- The screen may flash instantaneously during the install

(update) process. This is a normal operation.

6)

Check the result of install (update) of the firmware.

Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.

OK: Update success

NG: Update failed

Not Update: The update process is not executed.

Cause of Update process not executed:

The option unit for the target firmware is not connected.

7)

Turn OFF the power to terminate the boot mode.

1)

Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2)

After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.

3)

Turn ON the main power switch and the power switch on the
operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

Firmware 
version check 
function

Displays the firmware version of the ICU PWB, the 
SCU PWB, the PCU PWB, and the FAX PWB.

Firmware install 
(update) function

Installs (revises) the firmware by transmitting data 
from the PC which is connected to the ICU PWB, the 
SCU PWB, the PCU PWB, the FAX PWB, and other 
options with the USB flash drive or the USB cable.

Version Check
IcM:UNUSUAL

Firm Update
    From USB Memory

 

[MENU] key

[BACK] key

[MENU] key

[BACK] key

 

&IRM

 

 

 

&IRM

 

 

&IRM

 

 

&IRM

5PDATE

 

&IRM

5PDATE

 

&IRM

5PDATE

 

&IRM

5PDATE

MX-C301  MX-FWX1 (INTERNET FAX EXPANSION KIT)  7 – 1

MX-C301

Service Manual

 

In order to specify the address of the Internet Fax with the PC-FAX
driver, the PC-FAX driver must be updated by the Internet Fax
expansion kit.

1)

Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2)

After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.

3)

Turn ON the main power switch and the power switch on the
operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

1

CD-ROM

1

2

Product key sheet

1

1

2

MX-C301  MX-AMX1 (APPLICATION INTEGRATION MODULE)  8 – 1

MX-C301

Service Manual

 

1)

Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2)

After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.

3)

Turn ON the main power switch and the power switch on the
operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

1

CD-ROM

2

2

MX-AMX1 GETTING STARTED GUIDE

1

3

Sharpdesk license kit Operation Manual

1

1

2

3

MX-C301  MX-AMX2 (APPLICATION COMMUNICATION MODULE)  9 – 1

MX-C301

Service Manual

 

1)

Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2)

After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.

3)

Turn ON the main power switch and the power switch on the
operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

1

CD-ROM

1

2

Operation manual

1

1

2