Sharp MX-BMX1 (serv.man4) Service Manual ▷ View online
20 October 2010
CF-3-2
6. Loosen nut [D] ( x 1).
7. Remove screws [E] ( x 2).
7. Remove screws [E] ( x 2).
[D]
[E]
Cover Feeder, viewed from
Booklet Maker rear side
COVER FEEDER
20 October 2010
Replacement Adjustment
CF-3-3
8. Note the position of the brackets [G] and [H].
9. Lift the rear end of Cover Feeder and carefully remove the complete unit so
9. Lift the rear end of Cover Feeder and carefully remove the complete unit so
that the shaft [F] comes loose from brackets [G] and [H].
NOTE: The shaft [F] must exit the cut-outs in the brackets [G] and [H] in the
Top Cover before it can be removed.
Cover Feeder, outer side view
Cover Feeder, inner side view
[F]
[H]
[H]
[F]
[G]
[G]
COVER FEEDER
Page intentionally blank
20 October 2010
Replacement Adjustment
CF-3-5
AREA F
3.2 AREA F
3.2.1 EMPTY BIN SENSOR Q31
1. Remove screw [A] ( x1).
2. Gently lift out Sensor Q31 [B] and disconnect connector [C] (
2. Gently lift out Sensor Q31 [B] and disconnect connector [C] (
x1).
2. Remove Sensor Q31 [B] ( x1).
[A]
[B]
[C]
Click on the first or last page to see other MX-BMX1 (serv.man4) service manuals if exist.