DOWNLOAD Sharp MX-B381 / MX-B401 (serv.man8) Service Manual ↓ Size: 15.34 MB | Pages: 52 in PDF or view online for FREE

MX-B381/B401  MX-FWX1 (INTERNET FAX EXPANSION KIT)  7 – 1

MX-B401

Service Manual

 

<Note before installation>
• In order to enable the Internet Fax send function, the product key

must be acquired.

• In order to specify the address of the Internet Fax with the PC-

FAX driver, the PC-FAX driver must be updated by the Internet
Fax expansion kit.

1)

In order to enable the Internet Fax send function, enter the
product key by the key operation on the operation panel.
a)

Press the system setting key on the operation panel.

b)

Select page 2/2 of the system setting, and touch [Product
key input] key.

c)

Touch [Internet Fax expansion kit] key.

d)

Enter the product key with numeric key (10-key), and
touch [Registration] key.

2)

After completion of entry of the product key, turn OFF the
power switch on the operation panel. Turn OFF the main
power switch, then turn ON the power switch and the main
power switch again.
* After completion of 1) and 2), the Internet Fax send function

from the main unit becomes enable. To enable the Internet
Fax send with the PC-FAX driver, the following steps 3) and
4) are required.

3)

Use the CD-ROM packed together with the machine to install
the PC-FAX driver.
For installing procedures, refer to the software setup guide.

4)

Update the PC-FAX driver with the CD-ROM packed together
with the machine.
* Install and setting of the driver to the PC server must be per-

formed by the user or by the request from the user.

1)

After completion of entry of the product key, check to confirm
that the Internet Fax send is performed normally from the
machine.

2)

After completion of update of the PC-FAX driver, press the
print button on the test page of the PC-FAX driver to check to
confirm that the Internet Fax send is performed normally.

1

CD-ROM

1

2

Product key sheet

1

1

2

MX-B381/B401  MX-PUX1 (XPS EXPANSION KIT)  8 – 1

MX-B401

Service Manual

 

<Note before installation>
To enable XPS, an expansion memory (MX-SMX3) must be
installed.
To install an expansion memory, refer to the descriptions of "[12]
MX-SMX3" on this manual.

1)

To enable XPS, enter the product key by the key operation of
the copier machine.
a)

Press the system setting key on the operation panel.

b)

Select page 2/2 of the system setting, and touch [Product
key input] key.

c)

Touch [XPS expansion kit] key.

d)

Enter the product key with numeric key (10-key), and
touch [Registration] key.

2)

After completion of entry of the product key, turn OFF the
power switch on the operation panel. Turn OFF the main
power switch, then turn ON the power switch and the main
power switch again.

3)

Use the CD-ROM packed together with the machine to install
the XPS driver.
For installing procedures, refer to the software setup guide.
Installation of the driver must be performed by the user or the
serviceman with assistance or the user.

1

CD-ROM

1

2

Operation manual

1

1

2

APPLICATION
NUMBER

MACHINE
SERIAL
NUMBER

PRODUCT
KEY

Please keep below important information.
This information will use for other products.

MX-B381/B401  MX-AMX1 (APPLICATION INTEGRATION MODULE)  9 – 1

MX-B401

Service Manual

 

<Note before installation>
To enable the Application Integration Module function, the product
key must be acquired.

1)

To enable the Application Integration Module function, enter
the product key by the key operation of the operation panel.
a)

Press the system setting key on the operation panel.

b)

Select page 2/2 of the system setting, and touch [Product
key input] key.

c)

Touch [Application expansion kit] key.

d)

Enter the product key with numeric key (10-key), and
touch [Registration] key.

2)

After entering the product key information, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again. (For the models with the main power switch
only, turn OFF/ON the main power switch only.)

1)

Send image data and meta data by referring to MX-AMX1
GETTING STARTED GUIDE (included in package). Check to
confirm that image data and meta data are properly received.

1

CD-ROM

2

2

MX-AMX1 GETTING STARTED GUIDE

1

3

Sharpdesk license kit Operation Manual

1

1

2

3

MX-B381/B401  MX-AMX2 (APPLICATION COMMUNICATION MODULE)  10 – 1

MX-B401

Service Manual

 

<Note before installation>
* To enable the external account kit, the product key must be

acquired.

To enable the Application Communication Module, enter the prod-
uct key by key operations on the operation panel.
1)

Press the [SYSTEM SETTINGS] key.

2)

Touch the [Admin Password] key.

3)

Touch the [Password] key and enter the administrator pass-
word.

4)

Touch the [OK] key.

5)

Touch the [Product Key] key.
You may have to scroll down the screen to show this key.

6)

Touch the [Application Communication Module] key.

7)

Enter the product key with the 10-key, and touch [OK] key.

• The product key can be entered from the Web page. 

For details, refer to [HELP] on the right upper side of the Web
page.

1)

By performing procedure A, "OSA setting" key is added to the
menu screen of the system setting or the key operator pro-
gram.

2)

When "OSA setting" key is touched, the menu below is dis-
played.

3)

When the [Default Display Setting] key is touched, the screen
for setting the default display that appears when the [DOCU-
MENT FILING] key is pressed will appear.
• To set the base screen of document filing as the default dis-

play, touch the [Document Filing] key.

• To set the external application selection screen as the

default display, touch the [OSA] key.

4)

After selecting the setting, touch the [OK] key.
• "Default Display Setting" also appears in "Document Filing

Settings" in the system settings (administrator).

• If the [CA] key is pressed in document filing mode or OSA

mode, the base screen of that mode will appear regardless
of the default display setting.

1)

Click the [Login] button that appears in the upper right-hand
corner of the Web page.

2)

Select [Administrator] in [Login Name] and then enter your
password.

3)

Click [External Applications Setup] in the menu frame.

4)

Configure the standard application settings.
• Up to 8 standard applications can be stored.
• For each setting item, refer to [Help].

1

CD-ROM

1

2

Operation manual

1

1

2