Sharp MX-B381 / MX-B401 (serv.man8) Service Manual ▷ View online
MX-B381/B401 MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 1
MX-B401
Service Manual
[4] MX-FXX3 (FACSIMILE EXPANSION KIT)
1. Unpacking
A. Check the packed items
2. Installation
<Precautions for installation>
Before execution of installation, check to confirm that the communi-
cation lamp on the operation panel and the data lamp under it are
not lighted or blinking.
Before execution of installation, check to confirm that the communi-
cation lamp on the operation panel and the data lamp under it are
not lighted or blinking.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
then turn OFF the power switch.
3)
Disconnect the power plug from the power outlet.
B. FAX unit installation
1)
Remove the two screws on the rear cabinet of the main unit.
Attach the step screw (included in the package) to one of the
removed screw positions.
Attach the step screw (included in the package) to one of the
removed screw positions.
No.
Packed part names
Quantity
1
FAX memory
1
2
Ferrite core
1
3
Line cable
1
4
Screw (M3)
1
5
Step screw
1
6
Clamp
1
7
Instructions for installation
1
2
4
5
7
6
1
3
Australia
MX-B381/B401 MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 2
2)
Hang the FAX unit on the step screw. Fix the FAX unit with the
screws which were removed in the step 1).
screws which were removed in the step 1).
C. FAX memory installation
1)
Open the front cover and the tray 1.
2)
Remove the stopper, and slide the left cabinet to the front side
to remove.
to remove.
3)
Remove the screw, and remove the controller cover.
4)
Install the FAX memory (included in the package) to the slot E
for an option of the MFPC PWB.
for an option of the MFPC PWB.
D. I/F cable connection
1)
Connect the I/F cable to the FAX unit of the MFPC PWB.
Attach the clamp (included in the package) and pass the I/F
cable through the clamp.
NOTE: Check to confirm that the connector is not inserted
Attach the clamp (included in the package) and pass the I/F
cable through the clamp.
NOTE: Check to confirm that the connector is not inserted
obliquely.
MX-B381/B401 MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 3
2)
Cut off the notch section of the rear cabinet. Attach the I/F
cable to the rear cabinet and the frame, and fix the banding
band with the screw (M3) (included in the package).
cable to the rear cabinet and the frame, and fix the banding
band with the screw (M3) (included in the package).
3)
Attach the controller cover, and fix it with the screw.
4)
Attach the left cabinet by using care for the hook, and fix the
stopper.
stopper.
5)
Close the front cover and the tray 1.
E. Turn on the power of the main unit
1)
Insert the power plug into the power outlet.
2)
Turn ON the power switch.
3)
Turn ON the power switch on the operation panel.
F. Set the destination and the logo type.
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
operation [P], [
], [C], and [] to enter the simulation mode.
2)
Use the numeric keys to enter [26] in the main code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
SIMULATION
INPUT A MAIN NUM BY 10-KEY, AND PRESS START
01: SCANNER CHECK
02: SPF CHECK
03: AFTER PROCESS CHECK
04: DESK/LCC CHECK
05: PANEL/LAMP CHECK
06: MFP CHECK
07: AGING
TEST
1/9
CLOSE
26
MX-B381/B401 MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 4
3)
Use the numeric keys to enter [06] in the sub-code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
4)
Press the desired destination on the touch panel and press
[EXECUTE] to highlight it.
[EXECUTE] to highlight it.
5)
Press the [CA] key or the [SYSTEM SETTINGS] key to exit
from the simulation mode. The message [PLEASE TURN
MAIN POWER OFF THEN ON] is displayed.
Restart the machine to change the destination.
from the simulation mode. The message [PLEASE TURN
MAIN POWER OFF THEN ON] is displayed.
Restart the machine to change the destination.
• List of destinations
G. Clear the FAX related software switches.
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
operation [P], [
], [C], and [] to enter the simulation mode.
2)
Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
3)
Use the numeric keys to enter [02] in the sub-code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
4)
Use numeric keys [0] and [1] to enter the desired 8-digit coun-
try code.
After entry, press [SET], [EXECUTE], and [YES] in this order.
try code.
After entry, press [SET], [EXECUTE], and [YES] in this order.
• Country code list screen
* Press the [DEST CODE] button on the initial screen to move to
the country code list screen.
To return to the input screen, press the [BACK] button.
To return to the input screen, press the [BACK] button.
Display
Description
01: U.S.A
U.S.A.
02: CANADA
Canada
03: INCH
Inch system, other destinations
04: JAPAN
Japan
05: AB_B
AB system (B5 size detectable), other destinations
06: EUROPE
Europe
07: U.K.
U.K.
08: AUS.
Australia
09: AB_A
AB system (A5 size detectable), other destinations
10: CHINA
China
SIMULATION
NO.26
INPUT A SUB NUM BY 10-KEY, AND PRESS START
01: RIGHT TRAY SETUP
02: SIZE SETUP
03: AUDITOR SETUP
06: DESTINATION SETUP
10: NETWORK SCANNER TRIAL MODE SETUP
18: TONER SAVE MODE SETUP
30: CE MARK CONTROL SETTING
TEST
1/3
CLOSE
06
SIMULATION
NO.26-06
DESTINATION SETUP
01:
01:
TEST
05:
09:
09:
03:
07:
07:
02:
06:
10:
06:
10:
04:
08:
08:
1/1
00
U.S.A.
AB_B
AB_A
AB_A
CANADA
EUROPE
EUROPE
CHINA
INCH
U.K.
JAPAN
AUS.
CLOSE
EXECUTE
SIMULATION
INPUT A MAIN NUM BY 10-KEY, AND PRESS START
01: SCANNER CHECK
02: SPF CHECK
03: AFTER PROCESS CHECK
04: DESK/LCC CHECK
05: PANEL/LAMP CHECK
06: MFP CHECK
07: AGING
TEST
1/9
CLOSE
66
Country code list
JAPAN
: 00000000
SWITZERLAND
: 10100110
U.S.A.
: 10110101
AUSTRIA
: 00001010
AUSTRALIA
: 00001001
INDONESIA
: 01010100
U.K.
: 10110100
THAILAND
: 10101001
FRANCE
: 00111101
MALAYSIA
: 01101100
GERMANY
: 00000100
INDIA
: 01010011
SWEDEN
: 10100101
PHILIPPINES
: 10001001
NEWZEALAND
: 01111110
HONGKONG
: 01010000
CHINA
: 00100110
RUSSIA
: 10111000
SINGAPORE
: 10011100
SOUTHAFRICA
: 10011111
TW
: 11111110
SPAIN
: 10100000
MIDDLEAND
NEAREAST
NEAREAST
: 11111101
PORTUGUESE
: 10001011
SLOVAKIA
: 11111100
LUXEMBURG
: 01101001
OTHER3
: 11111011
BELGIUM
: 00001111
FINLAND
: 00111100
CZECH
: 00101110
NORWAY
: 10000010
HUNGARY
: 01010001
DENMARK
: 00110001
GREECE
: 01000110
NETHERLANDS
: 01111011
POLAND
: 10001010
ITALY
: 01011001
BRAZIL : 00010110
SIMULATION
NO.66
INPUT A SUB NUM BY 10-KEY, AND PRESS START
01: FAX SOFT SW. SETTING.
02: FAX SOFT SW. CLEAR.
03: FAX PWB MEMORY CHECK.
04: SIGNAL OUTPUT CHECK. (LEVEL MAX)
05: SIGNAL OUTPUT CHECK. (SOFT SW.)
06: PASS CODE PRINT OUT.
07: IMAGE MEMORY PRINT OUT.
02: FAX SOFT SW. CLEAR.
03: FAX PWB MEMORY CHECK.
04: SIGNAL OUTPUT CHECK. (LEVEL MAX)
05: SIGNAL OUTPUT CHECK. (SOFT SW.)
06: PASS CODE PRINT OUT.
07: IMAGE MEMORY PRINT OUT.
TEST
1/5
CLOSE
02
SET
SIMULATION
NO.66-02
CLOSE
FAX SOFT SW.CLEAR - U.S.A.
TEST
10110101
PRESENT:
NEW:
SURE?
YES
NO
EXECUTE
DEST CODE
SIMULATION
NO.66-02
FAX SOFT SW.CLEAR - U.S.A.
JAPAN
:00000000
AUSTRALIA
:00001001
FRANCE
:00111101
SWEDEN
:10100101
U.S.A.
:10110101
U.K.
:10110100
GERMANY
:00000100
NEWZEALAND
:01111110
TEST
1/5
CLOSE
BACK
Click on the first or last page to see other MX-B381 / MX-B401 (serv.man8) service manuals if exist.