DOWNLOAD Sharp MX-B201D (serv.man9) Service Manual ↓ Size: 16.14 MB | Pages: 127 in PDF or view online for FREE

MX-B201/B201D  UNPACKING AND INSTALLATION  5 - 7

If the machine will be used as a shared printer on a network, follow
these steps to install the printer driver in the client computer.

Note: To configure the appropriate settings in the print server, see

the operation manual or help file of your operating system.

1) Perform steps 2) through 6) in "Installing the software".

2) Click the "Custom" button.

3) Click the "MFP Driver" button.

Click the "Display Readme" button to show information on pack-
ages that are selected.

4) Select "Connected via the network" and click the "Next" button.

5) Click the "Add Network Port" button.

In Windows Vista/7, the "Add Network Port" button does not
appear.

6) Select the network printer that is shared and click the "OK" but-

ton.
Ask your network administrator for the server name and printer
name of the machine on the network.

7) In the printer port selection window, verify the network printer

that is shared and whether the machine is to be used as the
default printer, make the selections and click the "Next" button. 
Follow the on-screen instructions.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

8) You will return to the window of step 3). Click the "Close" button.

Note: After the installation, a message prompting you to restart

your computer may appear. In this case, click the "Yes"
button to restart your computer.

This completes the installation of the software.

MX-B201/B201D  UNPACKING AND INSTALLATION  5 - 8

Button Manager is a software program that works with the scanner
driver to enable scanning from the machine.

To scan using the machine, Button Manager must be linked with the
scan menu on the machine. Follow the steps below to link Button
Manager to scanner events.

1) Click the "Start" button, click "Control Panel", click "Printers and

Other Hardware", and then click "Scanners and Cameras".

• In Windows Vista/7, click the "start" button, select "Control

Panel" and click "Printers and Other Hardware", and then
click "Scanners and Cameras".

2) Click the "SHARP MX-xxxx" icon and select "Properties" from

the "File" menu.

• On Windows Vista/7, select "Properties" from the "Organize"

menu.

3) In the "Properties" screen, click the "Events" tab.

4) Select "SC1:" from the "Select an event" pull-down menu.

5) Select "Start this program" and then select "Sharp Button Man-

ager Y" from the pull-down menu.

6) Click the "Apply" button.

7) Repeat Steps 4) through 6) to link Button Manager to "SC2:"

through "SC6:".
Select "SC2:" from the "Select an event" pull-down menu.
Select "Start this program", select "Sharp Button Manager T"
from the pull-down menu, and then click the "Apply" button. Do
the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button
to close the screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager Settings" in the Online Manual.

1) Click the "Start" button, select "Settings", and then click "Con-

trol Panel".

2) Double-click the "Scanners and Cameras" icon.

3) Select "SHARP MX-xxxx" and click the "Properties" button.

4) In the "Properties" screen, click the "Events" tab.

5) Select "SC1:" from the "Scanner events" pull-down menu.

6) Select "Sharp Button Manager Y" in "Send to this application".

Note: If other applications are shown, deselect the checkboxes

for the other applications and leave only the Button
Manager checkbox selected.

7) Click the "Apply" button.

MX-B201/B201D  UNPACKING AND INSTALLATION  5 - 9

：'11/Oct/17

8) Repeat Steps 5) through 7) to link Button Manager to "SC2:"

through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu.
Select "Sharp Button Manager Y" in "Send to this application"
and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button
to close the screen.

Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager settings".

Type-B connector

Shielded twisted pair cable

(2 m (6 feet) Max.: high-speed transmission equivalent)

The pin numbers and signal names are listed in the following table.

When moving the unit, follow the procedure below.

Note: When moving this unit, be sure to remove the toner cartridge

and developer unit in advance.

1) Turn the power switch off and remove the power cord from the

outlet.

2) Open the side cover and front cover, in that order. Remove the

toner cartridge and developer unit and close the front cover and
side cover, in that order.

To open and close the side cover and front cover, and to remove
the toner cartridge and developer unit.

3) Raise the handle of the paper tray and pull the paper tray out

until it stops.

4) Push the center of the pressure plate down until it locks in place

and lock the plate using the pressure plate lock which has been
stored in the front of the paper tray.

5) Push the paper tray back into the unit.

6) Lock the scan head locking switch.

Note: When shipping the unit, the scan head locking switch must

be locked to prevent shipping damage.

7) Close the multi-bypass tray and the paper output tray extension,

and attach the packing materials and tape which were removed
during installation of the unit.

8) Pack the unit into the carton.

If the machine is installed in a highly humid environment, you can
alleviate dew condensation inside the scanner by installing the
scanner moisture-proof kit described below.

Scanner moisture-proof kit (DKIT-0016QSZZ)

Clean the position where each cushion/mylar is attached with
industrial alcohol before the work.

Pin No.

Signal name

1

+5V

2

-DATA

3

+DATA

4

GND

1

2

3

4

Name

Part code

Qty

1

Scanner condensation 
prevention mylar

PSHEZ0493QSZZ

3

2

Optical right hole mylar B

PSHEZ0469QSZZ

2

3

Scanner motor metal plate 
cushion

PMLT-0106QSZZ

2

4

Scanner upper surface cushion

PMLT-0105QSZZ

1

5

Scanner motor lower mylar

PSHEP0600QSZZ

1

6

Scanner UPG mylar J3

PSHEP0599QSZZ

1

7

Fan housing cushion

PMLT-0108QSZ1

1

MX-B201/B201D  UNPACKING AND INSTALLATION  5 - 10

Turn the main switch to the "OFF" position and remove the power
plug from the outlet.

1) Remove original cover.

2) Remove the rear cabinet.

Remove the three screws and then remove the rear cabinet.

3) Remove the rear cover for the document glass.

<1> Remove the two screws and then remove the right glass

holder.

<2> Slide the rear cover for the document glass to remove it.

<3> Remove the table glass.

4) Attach the Scanner condensation prevention mylar at the 3

positions on the rear side of the main unit as described below.

Note: The hole should be covered with the mylar.

Align the edge of the mylar to the R part (the yellow line in the
diagram below) so that the hole of the metal plate is covered as
much as possible.

Align the edge of the mylar to the R part (the yellow line in the
diagram below) so that the hole of the metal plate is covered as
much as possible.

Attach along the edge of the projection (the yellow line in the
diagram below).

1

2

3