Sharp MX-6240N / MX-7040N (serv.man29) Service Manual ▷ View online
MX-7040N DISASSEMBLY AND ASSEMBLY 10 – 13
F. Manual paper feed section
(1) Manual paper feed tray
1)
Open the right door unit.
2)
Remove the screw, and remove the right door rear cabinet.
3)
Remove the screw, and remove the right door front cabinet
lower.
lower.
4)
Remove the cover. Disconnect the connector.
5)
Remove the shaft. Remove the screw, and remove the manual
paper feed tray.
paper feed tray.
(2) Manual paper feed unit
1)
Remove the manual paper feed unit.
2)
Disconnect the connector. Remove the screw, and remove the
manual paper feed unit.
manual paper feed unit.
No.
Name
1
Manual paper feed tray
2
Manual paper feed unit
2
1
2
1
2
1
1
1
1
2
3
2
2
1
4
3
3
3
1
1
2
MX-7040N DISASSEMBLY AND ASSEMBLY 10 – 14
G. Paper transport section
(1) Interface unit
1)
Remove the tandem paper feed tray.
2)
Remove the front cover.
3)
Disconnect the connector. Remove the screw, and remove the
interface unit.
interface unit.
(2) Right vertical transport unit
1)
Remove the waste toner bottle.
2)
Remove the resin E-ring, and remove the right vertical trans-
port unit.
port unit.
(3) Vertical transport unit
1)
Remove the right vertical transport unit.
2)
Open the right door unit.
3)
Disconnect the connector. Remove the screw, and remove the
vertical transport unit.
vertical transport unit.
No.
Name
1
Interface unit
2
Right vertical transport unit
3
Vertical transport unit
4
LCC transport unit
5
PS lower unit
6
PS unit
7
Paper dust cleaner unit
1
3
2
6
7
5
4
2
3
1
1
2
3
1
1
2
2
MX-7040N DISASSEMBLY AND ASSEMBLY 10 – 15
(4) LCC transport unit
1)
Remove the right lower door and the right cabinet lower.
2)
Remove the screw and the connector, and remove the LCC
transport unit.
transport unit.
(5) PS lower unit
1)
Remove the LCC transport unit.
2)
Remove the PS unit.
3)
Remove the screw, and remove the PS lower unit.
(6) PS unit
1)
Remove the paper dust cleaner unit.
2)
Open the right door unit.
3)
Remove the screw, and remove the cover. Disconnect the con-
nector.
nector.
4)
Remove the screw, and slide the PS unit to the front side and
remove it.
remove it.
(7) Paper dust cleaner unit
1)
Open the front cover.
2)
Pull out and remove the paper dust removing unit.
1
2
3
1
1
2
2
3
3
1
2
1
1
MX-7040N DISASSEMBLY AND ASSEMBLY 10 – 16
H. LSU section
(1) LSU
1)
Remove the left cabinet upper.
2)
Remove the screw, and remove the cover.
3)
Disconnect the connector from LSU. Remove the screw, and
pull out the LSU.
pull out the LSU.
Note for disassembling the LSUcnt PWB
Do not hold the right and left edges of the LSUcnt PWB when dis-
assembling.
* The board may be warped, resulting in solder separation of built-
Do not hold the right and left edges of the LSUcnt PWB when dis-
assembling.
* The board may be warped, resulting in solder separation of built-
in parts.
Be sure to hold the upper and lower edges of the LSUcnt PWB
when disassembling.
when disassembling.
Note for assembling the LSUcnt PWB
No.
Name
1
LSU
1
2
1
1
1
1
1
2
3
2
1
NG
OK
When connecting in board-to-board, press these points to engage.
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man29) service manuals if exist.