Sharp MX-6201N / MX-7001N (serv.man41) Service Manual ▷ View online
MX-7001N DRIVE SECTION Q – 5
d. Transfer belt separation sensor CL
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the main drive unit (CL). (Refer to the "(1) Main drive
unit (CL)".)
unit (CL)".)
3)
Disconnect the connector (A), and remove the transfer belt
separation sensor CL (B).
separation sensor CL (B).
B. Main drive unit (BK)
(1) Main drive unit (BK)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Open the front cabinet (A).
3)
Turn the blue screw (B) counterclockwise. Check that the lock
is released as shown in (C).
* Failure to complete this step may damage the primary trans-
is released as shown in (C).
* Failure to complete this step may damage the primary trans-
fer belt.
4)
Remove the screw (D). Hold the drum fixing knob (E) by the
hand to not rotate, remove the screw (F). Remove the drum
fixing knob (E).
hand to not rotate, remove the screw (F). Remove the drum
fixing knob (E).
Unit
Parts
1
Main drive unit (CL)
h
Transfer belt separation sensor CL
Unit
Parts
Page
1
Main drive unit (BK)
a
Developement drive motor_K
Q - 7
b
Developement drive motor
Q - 8
c
Drum motor_K
Q - 8
d
Belt separation clutch
(normal)
(normal)
Q - 9
e
Belt separation clutch
(reverse)
(reverse)
f
K phase detection
Q -10
g
Charger cleaner motor
Q -11
h
CCM rotation detection
i
PTC cleaner motor
Q -11
1-h
A
B
1-h
1-d
1-b
1-i
1-e
1-a
1
1-g
1-c
1-f
1-h
Unit
1
Main drive unit (BK)
1
A
B
C
E
D
F
MX-7001N DRIVE SECTION Q – 6
5)
Pull out the fixing cover (G).
6)
Loosen the screws (H), and open the cover (I) of the process
section.
section.
7)
Loosen the screw (J), pull out slightly the developement unit
(BK) (K) and the OPC drum unit (BK) (L).
(BK) (K) and the OPC drum unit (BK) (L).
8)
Remove the screws (M), and open the control box (N).
9)
Remove the screws (O), and remove the flywheel (P).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
10) Disconnect the connector (Q), and remove the snap band (R).
Remove the screw (S), and remove the BK process cooling
fan motor unit (T).
fan motor unit (T).
G
H
H
I
J
K
L
N
N
M
M
O
P
O
Q
R
S
T
MX-7001N DRIVE SECTION Q – 7
11) Disconnect the connectors (U).
12) Disconnect the connectors (V), and the connectors (W).
Remove the screws (X), and remove the main drive unit (BK)
(Y).
* When connecting the connectors (W), refer to the mark (Z)
(Y).
* When connecting the connectors (W), refer to the mark (Z)
and connect it.
a. Developement drive motor_K
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
4)
Disconnect the connectors (E). Remove the screws (F). Disen-
gage the pawl (G) of PWB supporter, and remove the devel-
opement drive motor_K (H).
gage the pawl (G) of PWB supporter, and remove the devel-
opement drive motor_K (H).
Unit
Parts
1
Main drive unit (BK)
a
Developement drive motor_K
U
U
X
Y
1
W
V
V
Z
1-a
B
B
A
A
C
D
C
E
E
F
F
F
F
H
1-a
G
MX-7001N DRIVE SECTION Q – 8
b. Developement drive motor
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
4)
Disconnect the connector (E), and remove the snap band (F).
Remove the screw (G), and remove the BK process cooling
fan motor unit (H).
Remove the screw (G), and remove the BK process cooling
fan motor unit (H).
5)
Disconnect the connector (I). Remove the screws (J), and
remove the transfer drive motor (K).
remove the transfer drive motor (K).
c. Drum motor_K
Unit
Parts
1
Main drive unit (BK)
b
Developement drive motor
1-b
B
B
A
A
C
D
C
Unit
Parts
1
Main drive unit (BK)
c
Drum motor_K
E
F
G
H
J
J
I
K
1-b
1-c
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.