Sharp MX-5500N / MX-6200N / MX-7000N (serv.man10) Peripheral ▷ View online
MX-LCX2 DISASSEMBLY AND ASSEMBLY 6 – 3
B. Lift motor
1) Remove the drive unit.
2) Remove the E-ring, and remove the parts.
2) Remove the E-ring, and remove the parts.
3) Remove the screw, and remove the cover.
4) Remove the screw, and remove the lift motor.
5) Remove the ring, and remove the pulley.
C. Clutch
1)
Remove the paper feed unit. (Refer to "3. Each unit removal.")
2)
Remove the screw, and remove the cover.
3)
Remove the E-ring, and remove the parts.
4)
Disconnect the connector, and remove the screw.
5)
Remove the frame.
MX-LCX2 DISASSEMBLY AND ASSEMBLY 6 – 4
6) Remove the connector, and the E-ring, and remove the paper
feed, transport clutch, respectively.
D. Paper feed solenoid
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the screw, and remove the unit.
2) Remove the cover.
3) Remove the screw, and remove the unit.
4) Disconnect the connector.
5) Remove the screw, and remove the solenoid.
5) Remove the screw, and remove the solenoid.
E. Torque limiter
1)
Remove the paper feed unit.
2)
Remove the cover.
3)
Remove the E-ring and the screw, and remove the parts.
4)
Lift the shaft, and remove the torque limiter.
MX-LCX2 DISASSEMBLY AND ASSEMBLY 6 – 5
F. Transport roller
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the spring, and remove the screw.
2) Remove the cover.
3) Remove the spring, and remove the screw.
4) Remove the plate cover, and remove the lever.
5) Remove the clutch.
6) Remove the screw and the E-ring, and remove the parts.
7) Remove the transport roller.
6) Remove the screw and the E-ring, and remove the parts.
7) Remove the transport roller.
MX-LCX2 MAINTENANCE 7 – 1
MX-LCX2
Service Manual
[7] MAINTENANCE
1. Maintenance system table
✕ : Checking (clean, replace or adjust as required) { : Cleaning ▲ : Replace ∆ : Adjust ✩ : Lubricate : Position shift
No.
Part name
When
calling
Main unit
maintenance cycle
Remarks
1
Pick-up roller/each paper feed roller
✕
{
As a rough guide, these rollers should be replaced when the LCC paper feed
counter reaches a value of 100K (Sim22-9) or when one year has elapsed
since the start of use.
counter reaches a value of 100K (Sim22-9) or when one year has elapsed
since the start of use.
2
Torque limiter
✕
✕
As a rough guide, the torque limiter should be replaced when the LCC paper
feed counter reaches a value of 800K (Sim22-9).
feed counter reaches a value of 800K (Sim22-9).
3
Each transport rollers
✕
{
4
Each transport paper guides
{
{
5
Each gears
✕
✕
6
Each belts
✕
7
Each sensors
✕
✕
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man10) service manuals if exist.