Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) Service Manual ▷ View online
MX-6070V MX-5070V/6070V/5050V/6050V (MAIN UNIT) 1 – 1
MX-6070V
Service Manual
[1] MX-5070V/6070V/5050V/6050V (MAIN UNIT)
1. Unpacking
A. Fixing tape and protection material removal
DSPF Model
EXIT TRAY
CABINET
standard
model
CABINET
standard
model
RSPF Model
EXIT TRAY
CABINET
standard
model
CABINET
standard
model
MX-6070V MX-5070V/6070V/5050V/6050V (MAIN UNIT) 1 – 2
Insert the DV sheet when the machine will be moved.
[For North America]
1)
Turn the drum cover securing locks (2) to release, and then raise
the drum positioning cover.
the drum positioning cover.
2)
Raise a lever to the left. Pull out the developing unit to remove.
3)
Remove the fixing tape.
Ĭ
Ĭ
ĭ
Ĭ
ĭ
MX-6070V MX-5070V/6070V/5050V/6050V (MAIN UNIT) 1 – 3
4)
Insert the developing unit so as not to give a strong shock to the
main unit gently.Raise a lever to the right.
main unit gently.Raise a lever to the right.
Slide the developing unit horizontally into the machine, in the
direction of the arrow, until developing unit locks into. place.
direction of the arrow, until developing unit locks into. place.
Do not push the unit diagonally, as contact with the drum may
occur causing damage.
occur causing damage.
When removing or installing the developing unit, put your hand
from below the unit and slide it in parallel along the guide.
from below the unit and slide it in parallel along the guide.
At that time, be careful not to touch the roller surface.
When installing the machine, there is no need to remove or install
the OPC drum unit. If it must be removed or installed for any rea-
son, follow the procedures below. When removing or installing the
OPC drum unit, put your hand from below the unit and slide it in
parallel along the guide on the right side.
the OPC drum unit. If it must be removed or installed for any rea-
son, follow the procedures below. When removing or installing the
OPC drum unit, put your hand from below the unit and slide it in
parallel along the guide on the right side.
At that time, be careful not to touch the OPC drum surface.
5)
Close the drum positioning cover, and lock it.
6)
Connect the connecter.
B. Packed items check
C. Lock release
(1)
Tray rotation plate lock release
1)
Pull out the tray. Turn the fixing material and remove it. Remove
the caution label.
Attach the removed fixing material to the position shown in the fig-
ure for future use.
Close the tray which was pulled out.
the caution label.
Attach the removed fixing material to the position shown in the fig-
ure for future use.
Close the tray which was pulled out.
Ĭ
ĭ
ĭ
ĭ
Ĭ
No.
Name
Quantity
1
Operation manual
1
2
Protection sheet
1
Ĭ
2
1
MX-6070V MX-5070V/6070V/5050V/6050V (MAIN UNIT) 1 – 4
(2)
Scanner (2/3 mirror unit) lock release
1)
Remove the optical unit fixing screw, and remove the note label.
2)
Attache the protection sheet.
2. Installation
When an optional paper feed desk is connected to the machine,
unpack and install the paper feed desk, then unpack the machine.
Place the machine on the option desk securely, and perform the
installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
unpack and install the paper feed desk, then unpack the machine.
Place the machine on the option desk securely, and perform the
installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
This models have been shipped with developer enclosed into the
developer unit and done Sim25-2. Therefore do NOT execute Sim25-2
at machine installation.
developer unit and done Sim25-2. Therefore do NOT execute Sim25-2
at machine installation.
If executed Sim25-2, replace all of the developers with new ones and
execute Sim25-2. If the machine have been used without replacing the
new developer. It may be trouble related to the life performance.
execute Sim25-2. If the machine have been used without replacing the
new developer. It may be trouble related to the life performance.
A. Toner cartridge installation
1)
Shake the toner cartridge horizontally several times
2)
Open the front cover and insert each toner cartridge
Be sure to install the color cartridge to their proper positions.
Avoid installation to a different color position.
Do not forcibly insert the toner cartridge.
Push it in until the cartridge is securely locked in place.
Developing units removed, be sure to remove the toner cartridges
as well to prevent toner clogging.
as well to prevent toner clogging.
Mounting location of the toner cartridge of each color
3)
Close the front cover
When the main unit is transported after installation, be sure to
keep DV unit and insert DV sheet.
keep DV unit and insert DV sheet.
Then, be careful not to make the developer spilled out from the
mouth of the DV unit.
mouth of the DV unit.
Ĭ
ĭ
Į
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) service manuals if exist.