Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man16) User Manual / Operation Manual ▷ View online
OPERATION GUIDE - TURNING ON THE POWER
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-011.htm[23/03/2012 12:15:49 PM]
MX-4110N / MX-4111N / MX-5110N / MX-5111N / MX-4112N / MX-5112N
TURNING ON THE POWER
OPERATIONS COMMON TO ALL MODES
Turning on the power
Turn the main power switch to the "
" position.
After the main power indicator lights
in green, press the [Power] button.
Turning off the power
Turn off the power by pressing the
[Power] button, then turn the main
power switch to the " " position.
power switch to the " " position.
Restart the machine.
Turn off the power by pressing the
[Power] button and then press it again
to turn on the power.
This section describes how to turn on/off the machine's power and how to restart the
machine.
Operate two power switches: the main power switch inside the front cover, located in
the lower left corner, and the [Power] button on the operation panel.
When turning off the main power switch, press the [Power] button on the
operation panel and then turn the main power switch to the "
operation panel and then turn the main power switch to the "
"position.
In a sudden case of main power outage , turn the power for the machine
back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been
turned off prior to the [Power] button is turned off, abnormal noises,
degraded image quality or other problems may result.
Turn off both the [Power] button and the main power switch and unplug
the power cord if you suspect a machine failure, if there is a bad
thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power
switch in the " " position.
switch in the " " position.
In order for some settings to take effect, the machine must be restarted.
In some states of the machine, restarting with the [Power] button may
OPERATION GUIDE - TURNING ON THE POWER
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-011.htm[23/03/2012 12:15:49 PM]
Index
Contents
not make the settings take effect. In this case, turn off the main power
switch and then turn it on again.
OPERATION GUIDE - PREHEAT MODE
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-012.htm[23/03/2012 12:15:50 PM]
MX-4110N / MX-4111N / MX-5110N / MX-5111N / MX-4112N / MX-5112N
PREHEAT MODE
Index
Contents
OPERATIONS COMMON TO ALL MODES
This mode lowers the temperature of the fusing unit and makes the machine wait in
low power consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status
without executing a job.
Compared to Auto Power Shut-Off Timer, the amount of energy saved is less and the
wakeup time is shorter.
In the preheat mode, the [Home Screen] button is lit and the light goes off for the
touch panel and the [Power Save Mode] button.
The touch panel is cleared when it is tapped or the [Home Screen] button is pressed.
To set preheat mode:
In "Setting mode", select [Energy Save] → [Preheat Mode Setting].
OPERATION GUIDE - AUTO POWER SHUT-OFF TIMER
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-013.htm[23/03/2012 12:15:52 PM]
MX-4110N / MX-4111N / MX-5110N / MX-5111N / MX-4112N / MX-5112N
AUTO POWER SHUT-OFF TIMER
Index
Contents
OPERATIONS COMMON TO ALL MODES
Auto Power Shut-Off Timer is also
activated by pressing the [Power Save]
button while the [Power Save] button is
not lit.
This mode is cleared when print data is
being received, fax data is being output,
or when the [Power Save] button is
pressed while it is blinking.
This mode turns off the power to the operation panel and the fusing unit, and makes
the machine wait in the lowest power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in
waiting status without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the
wakeup time is longer.
The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.
To set Auto Power Shut-Off Timer:
In "Setting mode", select [Energy Save] → [Auto Power Shut-Off].
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man16) service manuals if exist.