Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) Service Manual ▷ View online
MX3500N MX-TRX2 3 – 1
MX3500N
Service Manual
[3] MX-TRX2
1. Unpacking
A. Removal of the exit tray unit
B. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
Turn OFF the power switch in the front cabinet of the main unit.
3)
Remove the earth cord and disconnect the power plug of the
main unit from the power outlet.
main unit from the power outlet.
B. Installation of the exit roller unit
1)
Open the right door.
2)
Remove the screw, and remove the connector cover.
No.
Packed part names
Quantity
1
Exit roller unit
1
2
Full detection actuator
1
1
2
OFF
OFF
OFF
1
2
MX3500N MX-TRX2 3 – 2
3)
Remove the screw. Disengage the engagement in the front
side then in the rear side, and remove the paper exit cover.
side then in the rear side, and remove the paper exit cover.
4)
Connect the connector, and install the exit roller unit (package
part No. 1). Use the screw which was removed in step 3) and
fix the unit.
part No. 1). Use the screw which was removed in step 3) and
fix the unit.
5)
Install the connector cover, and fix it with the screw.
6)
Install the exit tray unit (A) and the full detection actuator (B)
(package part No. 2).
* Be careful of the installing direction of the full detection actu-
(package part No. 2).
* Be careful of the installing direction of the full detection actu-
ator.
C. Turn on the power of the main unit.
1)
Connect the earth cord, and insert the power plug of the main
unit into the power outlet.
unit into the power outlet.
2)
Open the front cabinet.
Turn ON the power switch in the front cabinet of the main unit.
Turn ON the power switch in the front cabinet of the main unit.
3)
Turn ON the power switch on the operation panel.
D. Tray setting
Use SIM26-1 to set the tray YES/NO.
1
2
3
4
A
B
B
ON
ON
ON
MX3500N MX-LCX1 4 – 1
MX3500N
Service Manual
[4] MX-LCX1
1. Unpacking
A. Removal of the large capacity tray unit
B. Removal of the fixing material and packing
parts
1)
Remove the fixing material.
2)
Remove the fixing material and the packing parts.
3)
Remove the paper feed desk fixing screw.
C. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
NOTE:
Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on
without removing the fixing screw, a trouble may be
resulted.
Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on
without removing the fixing screw, a trouble may be
resulted.
No.
Names of bundles
Quantity
1
Mounting plate upper
2
2
Connection unit
1
3
Fixing screw A (Hexagon with seat, S-tight, M4 x 35)
4
4
Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
2
5
Fixing screw C (screw 4 x 8 cup)
1
1
3
4
2
5
OFF
OFF
MX3500N MX-LCX1 4 – 2
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
Turn OFF the power switch in the front cabinet of the main unit.
3)
Remove the earth cord and disconnect the power plug of the
main unit from the power outlet.
main unit from the power outlet.
B. Connection of the main unit and the large
capacity tray unit
1)
Install the mounting plate upper (package part No. 1) to the
right side of the main unit with the fixing screw A (package part
No. 3).
* When installing, put the rubber section of the mounting plate
right side of the main unit with the fixing screw A (package part
No. 3).
* When installing, put the rubber section of the mounting plate
upper on the lower side.
2)
Remove the right door cover from the machine.
3)
Disengage the pawl, and remove the right adjuster.
4)
Remove the screw cap, and remove the screw.
5)
Remove the cover.
6)
Temporarily fix the fixing screw B (package part No. 4) midway.
OFF
1
2
3
3
1
1
2
1
2
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) service manuals if exist.