Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man31) User Manual / Operation Manual ▷ View online
29
Related topics
• Windows/Display the software selection
screen (common procedure) P.12
Troubleshooting
• Problem with Windows P.42
• How to check the IP address of this
• How to check the IP address of this
machine P.45
Changing ports
1. Display [Device and printer]
Right click at the start screen (or swipe upwards from the lower edge)
→
App bar
→ Click [All applications] → [Control panel] → [Hardware and sound] →
[Device and printer].
• For Windows Vista/Server 2008/7, click [Start]
→ [Control panel] →
[Hardware and sound]
→ [Device and printer].
2. Display the property screen of the printer
Right click the printer driver icon of this machine, then select [Printer property].
3. Add or change the port
Click the [Port] tab, then click the [Add port] button.
The "Port type selection"screen is displayed.
The "Port type selection"screen is displayed.
• To change to an existing port, select the port from the list and click
the [Apply] button.
4. Select [Standard TCP/IP Port]
Select [Standard TCP/IP Port], then click the [New port] button.
5. Click the [Next] button
The "Add port" screen is displayed.
6. Input the IP address of this machine.
Input the name of this machine (host name) or IP address, then click the [Next]
button.
button.
The "Additional port information input" screen is displayed.
STEP 1-6/11
Windows/Display the software selection screen (common procedure)
Installing others
Changing ports
30
Troubleshooting
• Problem with Windows P.42
• How to check the IP address of this
• How to check the IP address of this
machine P.45
Windows/Display the software selection screen (common procedure)
Installing others
Changing ports
7. Select [Custom], and click the [Next] button
The "Port setup" screen is displayed.
8. Setup the port
Choose either of the below and click the [OK] button.
• [Protocol] Raw / [Port number] 9100
• [Protocol] LPR / [Queue Name] lp
• [Protocol] LPR / [Queue Name] lp
9. Click the [Next] button of the step 4 screen
10. Click the [Finish] button
11. Click the [Close] button on the step 1 screen
• When using a port created by an OS standard "Standard TCP/IP Port",
click the [Configure Port...] button on the step 3 screen and set the
[SNMP Status Enabled] checkbox to
[SNMP Status Enabled] checkbox to
. If it is set to
. the printer
may not function correctly.
STEP 7-11/11
31
Windows/Utility Software installation
This section explains how to install software so that the machine can be easier to use.
Windows/Display the software selection screen (common procedure)
Windows/Utility Software installation
Windows/Display the software selection
screen (common procedure)
P.12
▶
▶
P.32
▶
▶
Install status monitor
paper on the computer.
※ Can only be used when connected to LAN.
※ Can only be used when connected to LAN.
Install PC-Fax driver
When installing the PC-Fax Driver, click the [Utility Software...] button, then click the
[PC-Fax Driver] button.
P.33
▶
▶
Install the scanner driver
Can scan images directly from TWAIN standard application.
※ Can only be used when connected to LAN.
※ Can only be used when connected to LAN.
32
Related topics
• "Software CD-ROM" included in this
machine P.6
• Operating environment of the computer
P.8
• Conditions of software use P.10
• Windows/Display the software selection
• Windows/Display the software selection
screen (common procedure) P.12
Troubleshooting
• Cannot install P.41
• Problem with Windows P.42
• How to setup this machine P.45
• Problem with Windows P.42
• How to setup this machine P.45
Install status monitor
Status monitor cannot be used when the IPP function is used.
1. Display the "Software selection" screen
Refer to "
Windows/Display the software selection screen (common procedure)
P.12
" on how to display the "Software selection" screen.
2. Click the [Utility Software...] button
3. Click the [Printer Status Monitor] button
Click the [Display details] button before installation and make sure that you
confirm the details of the software.
confirm the details of the software.
4. Follow the instructions on the screen and proceed with
installation
Confirm the content of the screen, and click the [Next] button.
The install complete screen is displayed.
The install complete screen is displayed.
5. Click the [Finish] button
Select [Register at startup] and click the [Finish] button. The printer status
monitor starts up automatically when the computer boots.
monitor starts up automatically when the computer boots.
6. Close the "Software selection" screen
Click [Close].
Now the install procedure is complete.
After the install procedure is complete, a message prompting restart may be
displayed. In this case, click the [Yes] button and restart the computer.
Now the install procedure is complete.
After the install procedure is complete, a message prompting restart may be
displayed. In this case, click the [Yes] button and restart the computer.
• Refer to help for operation.
• Select in the following order: Windows [Start] button
• Select in the following order: Windows [Start] button
→ [All programs] →
[SHARP printer status monitor]
→ [Help].
STEP 1-6/6
Windows/Display the software selection screen (common procedure)
Windows/Utility Software installation
Install status monitor
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man31) service manuals if exist.