DOWNLOAD Sharp MX-2630 (serv.man2) Service Manual ↓ Size: 96.88 MB | Pages: 127 in PDF or view online for FREE

MX-2630N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 4

1

The main power switch

Use this switch to turn on the power for the machine. When using the 
fax or Internet fax functions, always keep this switch in the “ | ” 
position.

2

Toner cartridge

This cartridge contains toner. When the toner in a cartridge runs out, 
replace with new one.

3

Waste toner box

This container collects excess toner that remains after printing.

A service technician collects 
replaced waste toner box.

4

Fusing unit

Heat is applied here to fuse the transferred image onto the paper.

The fusing unit is hot. Take 
care not to burn yourself when 
removing a misfeed.

5

Transfer belt

During full color printing, the toner images of the four colors on the 
photoconductive drums are combined
together on the transfer belt. During black and white printing, only the 
black toner image is transferred onto the transfer belt.

Do not touch or damage the 
transfer belt. This may cause a 
defective image.

6

Right side cover

Open this cover to remove a paper misfeed.

7

Paper reversing section cover

This unit is used for reversing paper when 2-sided printing is 
performed. Open this cover to remove a paper misfeed.

8

Waste toner box release button

Press this button when you need to release the waste toner box lock to 
replace the waste toner box or clean the laser unit.

9

Handle

Pull this out and grasp it when moving the machine.

10

A stand/550/2x550/3x550/550&2100 sheet 
paper drawer right-side cover

Open this to remove a paper misfeed in tray 2, 3 and 4.

11

Paper tray right side cover

Open this to remove a paper misfeed in tray 1.

12

Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to open the right 
side cover.

1

2

8

9 10 11 12

3

4

5

6

7

MX-2630N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 5

* Optional

1

LAN connector

Connect the LAN cable to this connector when the machine is used on a network. Use a shielded LAN 
cable.

2

Extension phone jack (TEL)*

When the fax function of the machine is used, an extension phone can be connected to this jack.

3

Telephone line jack (LINE)*

When the fax function of the machine is used, the telephone line is connected to this jack.

4

Power plug

1

2

3

4

MX-2630N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 6

Use your finger to touch the [Home Screen] key. If you use a pen or
other tool to touch the key, it may not operate properly. Risk of mal-
functioning if you use with jewelry or other accessories.

You can change the angle of the touch panel.

1

2

3

4

5

6

7

1

Data notification indicator

The indicator lights solidly or blinks to indicate the status of a job. When the Job separator or Exit tray unit 
(right tray) is used for output, this blinks until the output is removed.

2

Touch panel

Messages and keys appear on the touch panel display. Operate the machine by directly tapping the 
displayed keys.

3

Error indicator

Lights solidly or blinks to indicate the status of the error.

4

Main power indicator

This lamp lights up when the machine's main power switch is in the “ ” position. Blinks green during the 
time that the [Power] button does not operate immediately after the main power switch is switched on.

5

[Power] button

Use this button to turn the machine's power on and off.

6

[Power Save] button/indicator

Use this button to set the machine to Sleep mode for energy saving. [Power Save] button blinks when the 
machine is in Sleep Mode.

7

[Home Screen] key

Use this button to display the home screen.

MX-2630N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 7

1

Pickup roller

Picks up document and feed it to the document feed roller

2

Document feed roller

Feeds a document to the transport section. Makes a buckle on paper between the registration roller and this roller 
to correct the start position of document skew and document image scan

3

Separation roller

Separates a document to prevent double-feeding

4

Registration roller (Drive)

Transports a document to the transport roller 1 / Controls the transport timing of the document and adjusts the 
document scanning timing

5

Registration roller (Idle)

Apply a pressure to a document and the registration roller to provide the transport power of the transport roller to 
the document

6

Transport roller 1 (Drive)

Transports a document transported from the registration roller to the document scanning section

7

Transport roller 1 (Idle)

Apply a pressure to a document and the transport roller to provide the transport power of the transport roller to the 
document

8

Transport roller 2 (Drive)

Transports a document transported from the document scanning section to the paper exit roller

9

Transport roller 2 (Idle)

Apply a pressure to a document and the transport roller to provide the transport power of the transport roller to the 
document

10

Paper exit roller (Drive)

Discharges a document. Switchbacks the document and transports it to the registration roller when scanning the 
back surface

11

Paper exit roller (Idle)

Apply a pressure to a document and the paper exit roller to provide the transport power of the paper exit roller to 
the document

1

2

3

5

4

7

6

8

9

10 11