Sharp MX-2630 (serv.man2) Service Manual ▷ View online
MX-2630N SIMULATION 6 – 22
8-10
Purpose
Operation test/check/adjustment
Function (Purpose)
Used to check and adjust the operation of
the main charger grid voltage in each
printer mode and the control circuit.
the main charger grid voltage in each
printer mode and the control circuit.
Section
Process (Charging)
Operation/Procedure
1) Select a target item of setting with scroll key on the touch
1) Select a target item of setting with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
3) Press [OK] key. (The set value is saved.)
9
9-2
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the sen-
sors and detectors in the paper reverse
section (duplex section) and its control cir-
cuit.
sors and detectors in the paper reverse
section (duplex section) and its control cir-
cuit.
Section
Duplex
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
9-3
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the load in
the paper reverse section (duplex section)
and its control circuit.
the paper reverse section (duplex section)
and its control circuit.
Section
Duplex
Operation/Procedure
1) Select the item to be operation checked with the touch panel
1) Select the item to be operation checked with the touch panel
key.
2) Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
When [EXECUTE] key is pressed, the operation is terminated.
10
10-1
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the toner
supply mechanism (toner motor) and the
related circuit.
supply mechanism (toner motor) and the
related circuit.
Section
Process (Developing)
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel key.
When [ALL] key is pressed, all the items are selected.
When [ALL] key is pressed, all the items are selected.
2)
Press [EXECUTE] key.
The selected load operation is performed for 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
The selected load operation is performed for 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
This simulation must be executed without installing the toner car-
tridges.
If this simulation is executed with the toner cartridges installed,
toner will be forcibly supplied to the developing unit, resulting in
overtoner.
If this simulation is erroneously executed with the toner cartridges
installed, overtoner state may be deleted by making a few black
background copy in the single color copy mode of the target color.
tridges.
If this simulation is executed with the toner cartridges installed,
toner will be forcibly supplied to the developing unit, resulting in
overtoner.
If this simulation is erroneously executed with the toner cartridges
installed, overtoner state may be deleted by making a few black
background copy in the single color copy mode of the target color.
10-3
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the toner
cartridge discharge sensor and the related
circuit.
cartridge discharge sensor and the related
circuit.
Section
Process (Developing)
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel key.
2)
Press [EXECUTE] key.
13
13--
Purpose
Cancel (Trouble etc.)
Function (Purpose)
Used to cancel the self-diag "U1" trouble.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
Item/Display
Contents
Setting
range
Default
value
Changeabl
e range
MI
DD
LE
DD
LE
A
MIDDLE
SPEED
MC_K
SPEED
MC_K
Main charger
total current
(Middle speed
mode) K
total current
(Middle speed
mode) K
50 to
100
83
-500 to -
800 micro
A
800 micro
A
LO
W
W
A
LOW1
SPEED
MC_K
SPEED
MC_K
Main charger
total voltage
(Middle speed
1 mode) K
total voltage
(Middle speed
1 mode) K
50 to
100
83
-500 to -
800 micro
A
800 micro
A
APPD1
ADU paper transport detector 1
APPD2
ADU paper transport detector 2
DSW_ADU
ADU paper guide open/close detector
Display
Content
ADUM1
ADU motor 1
ADUM2
ADU motor 2
ADUGS
ADU gate solenoid
TNM_K
Toner motor K
TNM_C
Toner motor C
TNM_M
Toner motor M
TNM_Y
Toner motor Y
TCE_K
Toner cartridge discharge K
TCE_C
Toner cartridge discharge C
TCE_M
Toner cartridge discharge M
TCE_Y
Toner cartridge discharge Y
MX-2630N SIMULATION 6 – 23
14
14--
Purpose
Cancel (Trouble etc.)
Function (Purpose)
Used to cancel the self-diag H3, H4, H5
troubles.
troubles.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
15
15--
Purpose
Clear/Cancel (Trouble etc.)
Function (Purpose)
Used to cancel the self-diag "U6" trouble.
Section
LCC
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
16
16--
Purpose
Clear/Cancel (Trouble etc.)
Function (Purpose)
Used to cancel the self-diag "U2" trouble.
Section
SCN MFP PWB / PCU PWB
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
1) Press [EXECUTE] key.
2) Press [YES] key to execute cancellation of the trouble.
21
21-1
Purpose
Setting
Function (Purpose)
Used to set the maintenance cycle.
Section
Operation/Procedure
* Do not change the default setting value of the maintenance
* Do not change the default setting value of the maintenance
counter on SIM21-1. The replacement timing of the fusing clean-
ing roller, the filter and PS paper dust removal cleaner may not
clarify.
ing roller, the filter and PS paper dust removal cleaner may not
clarify.
1) Select a target item of setting with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
3) Press [OK] key. (The set value is saved.)
22
22-1
Purpose
Adjustment/Setting/Operation data output/
Check
Check
Function (Purpose)
Used to check the print count value in each
section and each operation mode.
(Used to check the maintenance timing.)
section and each operation mode.
(Used to check the maintenance timing.)
Section
Operation/Procedure
Change the display page with scroll key on the touch panel.
Change the display page with scroll key on the touch panel.
Item/Display
Content
Setting range
Default value
A
MAINTE-
NANCE
COUNTER
(TOTAL)
NANCE
COUNTER
(TOTAL)
Maintenance
counter (Total)
counter (Total)
0: Default
1 - 300: 1K - 300K
999: Free
1 - 300: 1K - 300K
999: Free
250K
B
MAINTE-
NANCE
COUNTER
(COLOR)
NANCE
COUNTER
(COLOR)
Maintenance
counter
(Color)
counter
(Color)
0: Default
1 - 300: 1K- 300K
999: Free
1 - 300: 1K- 300K
999: Free
250K
Item
Display
Content
Total
output
quantity
output
quantity
TOTAL OUT
(BW)
(BW)
Total output
quantity of black
and white
quantity of black
and white
All prints including
jams
jams
TOTAL OUT
(COL)
(COL)
Total output
quantity of color
quantity of color
All prints including
jams
jams
Total use
quantity
quantity
TOTAL (BW)
Total use quantity
of black and white
of black and white
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
TOTAL (COL)
Total use quantity
of full color
of full color
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
TOTAL
(2COL)
(2COL)
Total use quantity
of 2-color
of 2-color
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
TOTAL
(3COL)
(3COL)
Total use quantity
of 3-color
of 3-color
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
TOTAL
(SGL_COL)
(SGL_COL)
Total use quantity
of single color
of single color
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
Copy
COPY (BW)
Black and white
copy counter
copy counter
Billing target
(excluding self print)
(excluding self print)
COPY (COL)
Full color copy
counter
counter
Billing target
(excluding self print)
(excluding self print)
COPY (2COL)
2-color copy
counter
counter
Billing target
(excluding self print)
(excluding self print)
COPY
(SGL_COL)
(SGL_COL)
Single color copy
counter
counter
Billing target
(excluding self print)
(excluding self print)
Print
PRINT (BW)
Black and white
print counter
print counter
Billing target
(excluding self print)
(excluding self print)
PRINT (COL)
Full color print
counter
counter
Billing target
(excluding self print)
(excluding self print)
PRINT (2COL)
2-color print
counter
counter
Billing target
(excluding self print)
(excluding self print)
PRINT (3COL)
3-color print
counter
counter
Billing target
(excluding self print)
(excluding self print)
PRINT
(SGL_COL)
(SGL_COL)
Single color print
counter
counter
Billing target
(excluding self print)
(excluding self print)
Document
filing
filing
DOC FIL (BW)
Black and white
document filing
print counter
document filing
print counter
DOC FIL
(COL)
(COL)
Color document
filing print counter
filing print counter
DOC FIL
(2COL)
(2COL)
2-color document
filing print counter
filing print counter
DOC FIL(SGL
COL)
COL)
Single color
document filing
print counter
document filing
print counter
Other
OTHER (BW)
Black and white
other counter
other counter
Self print quantity
OTHER (COL)
Color other
counter
counter
Self print quantity
MX-2630N SIMULATION 6 – 24
22-2
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the total number of misfeed
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
Section
Operation/Procedure
The paper jam, trouble counter value is displayed.
The paper jam, trouble counter value is displayed.
22-3
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check misfeed positions and the
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
Section
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
22-4
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the trouble (self diag) his-
tory.
tory.
Section
Operation/Procedure
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
22-5
Purpose
Others
Function (Purpose)
Used to check the ROM version of each
unit (section).
unit (section).
Section
Firmware
Operation/Procedure
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
22-6
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to output the setting/adjustment data
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
Section
Operation/Procedure
* When installing or servicing, this simulation is executed to print
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
(Memory trouble, PWB replacement, etc.)
1)
Select the print list mode with 10-key.
2)
Press [EXECUTE] key to start printing the list selected in step
1).
1).
22-8
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of operations
(counter value) of the finisher, the SPF, and
the scan (reading) unit.
(counter value) of the finisher, the SPF, and
the scan (reading) unit.
Section
Operation/Procedure
The counter values of the finisher, the SPF, and the scanner related
counters are displayed.
The counter values of the finisher, the SPF, and the scanner related
counters are displayed.
MACHINE JAM
Machine JAM counter
RSPF/DSPF JAM
SPF JAM counter
TROUBLE
Trouble counter
Display
Content
S/N
Serial No. (The codes for November and
December are "X" and "Y" respectively.)
December are "X" and "Y" respectively.)
BUNDLE
Bundle version
ICU-MAIN
ICUM (MAIN section)
ICU-BIOS
ICUM (BIOS section)
ASIC-MAIN
ASIC (MAIN section)
ASIC-SUB
ASIC (SUB section)
LANGUAGE
Language support data version
LANGUAGE (LIST)
Language data for list printing
EOSA
ESCP font ROM
UNICONTENTS
Contents data for display
SIM-TEXT
Language data for simulation
PCL (PROFILE)
Color profile data
POWER-CON
Power controller program
FONT BARCODE
Font data for bar code
FONT PS
PS font data
FONT PCL
PCL font data
FONT SPDL
Simple PDL font data
FONT OFFICE
Office Direct font data
WATER MARK
Water mark data
E-MANUAL
Users manual data
OCR-DIC
OCR dictionary data
SCU
SCU
PCU
PCU
DESK/ESK (TANDEM)
Desk unit
LCC
LCC
FINISHER/FINISHER
(1KFIN)/ FINISHER (3KFIN)/
FINISHER (INNER)
(1KFIN)/ FINISHER (3KFIN)/
FINISHER (INNER)
Finisher
JOGGER
3K finisher jogger
FIN-SUB
3K finisher sub
SADDLE
Saddle
PUNCH/UNCH(3K)/
UNCH(IN)
UNCH(IN)
Punch unit
FAX OPT1
FAX 1-Line (Option section)
Display
Print list
mode
Print content
DATA
PATTERN
PATTERN
NO.1
Firmware version, counter data, etc.
NO.2
SIM50-24 data
NO.3
Data related to the process control
2SIDED PRINT
1-SIDED
One sided printing (Default)
2-SIDED
Double sided printing
Display
Content
SPF
Document feed quantity
SCAN
Number of times of scan
STAPLER
Staple counter
PUNCHER
Puncher counter
STAMP
Stamp counter
SADDLE STAPLER
Saddle staple counter
SADDLE V FOLD
Saddle finisher V fold counter
COVER
Document cover open/close counter
HP_ON
Number of scanner HP detection
OC LAMP TIME
Total lighting time of the scanner lamp
FIN OUTPUT
Finisher output counter
STAPLELESS STAPLE
Stapleless staple counter
MANUAL STAPLE
Manual staple counter
Display
Content
MX-2630N SIMULATION 6 – 25
22-9
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of use (print
quantity) of each paper feed section.
quantity) of each paper feed section.
Section
Paper feed, ADU
Operation/Procedure
The counter values related to paper feed are displayed.
The counter values related to paper feed are displayed.
22-10
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the system configuration
(option, internal hardware).
(option, internal hardware).
Section
Operation/Procedure
The system configuration is displayed.
(The model names of the installed devices and options are dis-
played.)
The system configuration is displayed.
(The model names of the installed devices and options are dis-
played.)
22-11
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the use frequency (send/
receive) of FAX.
(Only when FAX is installed)
receive) of FAX.
(Only when FAX is installed)
Section
FAX
Operation/Procedure
The values of the FAX send counter and the FAX receive counter
are displayed.
The values of the FAX send counter and the FAX receive counter
are displayed.
22-12
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the SPF misfeed positions
and the number of misfeed at each posi-
tion. (When the number of misfeed is con-
siderably great, it can be judged as
necessary for repair.)
and the number of misfeed at each posi-
tion. (When the number of misfeed is con-
siderably great, it can be judged as
necessary for repair.)
Section
SPF
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
Display
Content
TRAY1
Paper feed counter (Paper feed tray 1)
TRAY2
Paper feed counter (Paper feed tray 2)
TRAY3
Paper feed counter (Paper feed tray 3)
TRAY4
Paper feed counter (Paper feed tray 4)
MFT
Manual paper feed counter
LCC
LCC paper feed counter
ADU
ADU paper transport counter
TRAY1_TTL
Accumulated tray 1 paper feed counter
TRAY2_TTL
Accumulated tray 2 paper feed counter
TRAY3_TTL
Accumulated tray 3 paper feed counter
TRAY4_TTL
Accumulated tray 4 paper feed counter
MFT_TTL
Accumulated manual paper feed counter
LCC_TTL
Accumulated side LCC paper feed counter
ADU_TTL
Accumulated ADU paper feed counter
TRAY1_RETRY
Paper feed retry counter (Paper feed tray 1)
TRAY2_RETRY
Paper feed retry counter (Paper feed tray 2)
TRAY3_RETRY
Paper feed retry counter (Paper feed tray 3)
TRAY4_RETRY
Paper feed retry counter (Paper feed tray 4)
MFT_RETRY
Manual paper feed retry counter
LCC_RETRY
LCC paper feed retry counter
Item display
name
Display
content
content
Content
MACHINE
MX-2630N
Main unit
SPF
STANDARD
RIVERSING SINGLE PASS FEEDER
STAMP
AR-SU1
Finish stamp
DESK
MX-DE25 N
STAND/550 SHEET PAPER DRAWER
MX-DE26 N
STAND/2x550 SHEET PAPER DRAWER
MX-DE27 N
STAND/3x550 SHEET PAPER DRAWER
MX-DE28 N
STAND/550&2100 SHEET PAPER
DRAWER
DRAWER
MX-DE29 N
LOW STAND/550 SHEET PAPER
DRAWER
DRAWER
LCC
MX-LC17 N
A4 Large capacity tray
PUNCHER
MX-PN14A
Punch unit
MX-PN14B
MX-PN14C
MX-PN14D
MX-PN15A
MX-PN15B
MX-PN15C
MX-PN15D
MX-PN16A
MX-PN16B
MX-PN16C
MX-PN16D
MX-PN14C
MX-PN14D
MX-PN15A
MX-PN15B
MX-PN15C
MX-PN15D
MX-PN16A
MX-PN16B
MX-PN16C
MX-PN16D
FINISHER
MX-FN27 N
Inner finisher
MX-FN28
Finisher (1K)
MX-FN29
Saddle stitch finisher (1K)
MX-FN30
Finisher (3K)
MX-FN31
Saddle stitch finisher (3K)
EXIT TRAY
MX-TR19 N
Exit tray unit
STANDARD
Exit tray cabinet
SEPARATOR
MX-TR20
Job separator tray
FAX1
MX-FX15
Facsimile expansion kit
PS
MX-PK13
PS expansion kit
SECURITY
MX-FR-51U
Data security kit (commercial version)
ICU_PWB
(REUS)
(REUS)
*****MB
ICU REUS capacity
ICU_PWB
(SOC)
(SOC)
*****MB
ICU SOC capacity
HDD
*****GB
Hard disk capacity
SSD
*****MB
SSD capacity
BARCODE
MX-PF10
Barcode font kit
INTERNET-
FAX
FAX
MX-FWX1
Internet Fax expansion kit
AIM
MX-AMX1
Application integration module
ACM
MX-AMX2
Application communication module
EAM
MX-AMX3
External account module
OFFICE DRT
MX-PU10
Direct print expansion kit
FAX OUTPUT
FAX print quantity counter
FAX SEND
FAX send counter
FAX RECEIVED
FAX receive counter
SEND IMAGES
FAX send quantity counter
SEND TIME
FAX send time
RECEIVED TIME
FAX receive time
Item display
name
Display
content
content
Content
Click on the first or last page to see other MX-2630 (serv.man2) service manuals if exist.