Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man6) Service Manual ▷ View online
MX-C401 MX-FR12U/FR13U (DATA SECURITY KIT) 7 – 1
MX-C401
Service Manual
[7] MX-FR12U/FR13U
(DATA SECURITY KIT)
1. Unpacking
A. Check the packed items
1)
Check to confirm that all the parts are included in the package.
2. Installation
<Note before installation>
• To enable the data security function, the product key must be
• To enable the data security function, the product key must be
acquired. (For the acquisition procedures of the product key,
inquire the distributor.)
inquire the distributor.)
• Before installing the data security kit, be sure to bakc up the data
stored in the memory (including the HDD) of the machine.
When the data security kit is installed, all the job data stored in
the memory (including the HDD) of the machine are deleted.
When the data security kit is installed, all the job data stored in
the memory (including the HDD) of the machine are deleted.
• When the printer lamp and the image send communication lamp
and the data lamp on the operation panel are lighted or blinking,
unprocessed data remain in the memory (including the HDD) of
the machine. In this case, perform all the output/send oeprations
so that no data remain in the machine, then perform installation.
(Check to confirm that the communication lamp on teh operarion
panel and the data lamp udner it are not lighted and not blinking.)
unprocessed data remain in the memory (including the HDD) of
the machine. In this case, perform all the output/send oeprations
so that no data remain in the machine, then perform installation.
(Check to confirm that the communication lamp on teh operarion
panel and the data lamp udner it are not lighted and not blinking.)
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
then turn OFF the power switch.
3)
Disconnect the power plug from the power outlet.
B. MFP PWB cover removal
1)
Open the front cover and the paper feed tray 1.
2)
Remove the stopper, and shift the left cabinet to the front side
to remove.
to remove.
No.
Packed part names
Quantity
1
PROGRAM ROM 1
1
2
PROGRAM ROM 2
1
3
Operation manual
1
4
Installation manual
1
5
USB memory (with the program data in it)
1
1
1
2
3
4
5
: Apr. 20 2009
1
MX-C401 MX-FR12U/FR13U (DATA SECURITY KIT) 7 – 2
3)
Remove the screw, and remove the MFP PWB cover.
C. ROM replacement
1)
Replace the ROM. (Install the accessory DSK ROM.)
D. MFP PWB cover installation
1)
Install the MFP PWB cover.
2)
Install the left cabinet.
3)
Close the front cover and the tray 1.
E. Turn on the power of the main unit
1)
Insert the power plug into the power outlet.
2)
Turn ON the power switch.
31-sheet machine
38/40-sheet machine
MX-C401 MX-FR12U/FR13U (DATA SECURITY KIT) 7 – 3
3)
Turn ON the power switch on the operation panel.
F. DSK firmware installation
(1) Entering the boot mode
1)
When the power is turned ON, the main program error is dis-
played.
played.
2)
The above error message is displayed for 10 sec. Then the fol-
lowing message is displayed.
lowing message is displayed.
3)
The machine enters the boot mode which indicates that there
is an error in the main program.
is an error in the main program.
(2) Operations in the boot mode
When the machine is booted in the boot mode, the firmware ver-
sion check, the firmware install, and the version-up operation can
be performed.
* In the boot mode, the following keys are used for operation. Note
sion check, the firmware install, and the version-up operation can
be performed.
* In the boot mode, the following keys are used for operation. Note
that the functions of the keys in the boot mode differ from those
in the normal mode.
in the normal mode.
(2)-1. Key functions and operations in the boot mode
• 8.5 Inch LCD model
• 8.5 Inch LCD model
• 4.3 Inch LCD model
(2)-2. Functions in the boot mode
The following two functions are available in the boot mode.
The following two functions are available in the boot mode.
(2)-3. Selection of functions in the boot mode
There are two functions available in the boot mode. These modes
can be selected by pressing MENU key and BACK key.
There are two functions available in the boot mode. These modes
can be selected by pressing MENU key and BACK key.
(3) Firmware install and version-up procedures in the
boot mode
1)
Boot the machine in the boot mode. When the Version Check
display is indicated, press [MENU] key, and the machine
enters the Firm Update mode.
display is indicated, press [MENU] key, and the machine
enters the Firm Update mode.
2)
Insert the USB memory which includes the update firmware file
(SFU file) into the USB port of the machine, and press [OK]
key.
(SFU file) into the USB port of the machine, and press [OK]
key.
SFU file display
Key name in the
normal mode
Key name in the
boot mode
Function
Start key
(Monochrome)
(Monochrome)
[OK] key
Performs the selected item or
function.
function.
Home key
[MENU] key
Selects a menu.
Clear key
[BACK] key
Selects a menu.
(Serves as a cancel key in the
execution check screen.)
(Serves as a cancel key in the
execution check screen.)
Job status key
[UP] key
Selects an item.
System setting
key
key
[DOWN] key
Selects an item.
1
Main Program Error!!
Emergency Prog Init
Please wait
Version Check
IcM:UNUSUAL
JOB STATUS
IMAGE SEND
HOME
PRINT
READY
DATA
DATA
DATA
LINE
SYSTEM
SETTINGS
LOGOUT
DOWN key
UP key
BACK key
MENU key
OK key
Key name in the
normal mode
Key name in the
boot mode
Function
Start key
(Monochrome)
(Monochrome)
[OK] key
Performs the selected item or
function.
function.
Home key
[MENU] key
Selects a menu.
Clear key
[BACK] key
Selects a menu.
(Serves as a cancel key in the
execution check screen.)
(Serves as a cancel key in the
execution check screen.)
Job status key
[UP] key
Selects an item.
System setting
key
key
[DOWN] key
Selects an item.
Function
Content
Firmware
version check
function
version check
function
Displays the firmware version of the ICU PWB, the
SCU PWB, the PCU PWB, and the FAX PWB.
SCU PWB, the PCU PWB, and the FAX PWB.
Firmware install
(update) function
(update) function
Installs (revises) the firmware by transmitting data
from the PC which is connected to the ICU PWB, the
SCU PWB, the PCU PWB, the FAX PWB, and other
options with the USB memory or the USB cable.
from the PC which is connected to the ICU PWB, the
SCU PWB, the PCU PWB, the FAX PWB, and other
options with the USB memory or the USB cable.
LOGOUT
COPY
PRINT
OK
BACK
JOB STATUS
SYSTEM
SETTINGS
IMAGE SEND
READY
DATA
DATA
DATA
LINE
DOWN key
BACK key
UP key
MENU key
OK key
Version Check
IcM:UNUSUAL
Firm Update
From USB Memory
MENU key
BACK key
MENU key
BACK key
Firm Update
From USB Memory
Firm Update
> 0100P200.sfu
: Apr. 20 2009
1
MX-C401 MX-FR12U/FR13U (DATA SECURITY KIT) 7 – 4
3)
Select the firmware file (SFU file) of the target.
Use [UP] key and [DOWN] key to select the target file.
When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)
When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.
Use [UP] key and [DOWN] key to select the target file.
When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)
When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.
4)
Press [OK] key.
The selected firmware file (SFU) is read. (It takes about 1
minute.)
The selected firmware file (SFU) is read. (It takes about 1
minute.)
Display of reading file data
5)
After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)
(It takes about 5 - 6 minutes.)
Display of firmware install (Update) process
* The abbreviated name of the firmware which is currently
installed (updated) is displayed sequentially.
* The screen may flash instantaneously during the install
(update) process. This is a normal operation.
6)
Check the result of install (update) of the firmware.
Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.
Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.
Display of firmware update results
OK: Update success
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
7)
Turn OFF the power to terminate the boot mode.
1
Firm Update
Reading Data
Firm
Update
IcuM
Firm
Updat
IcuM
Firm
Updat
IcuM
Firm
Updat
IcuM
: Apr. 20 2009
1
Click on the first or last page to see other DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man6) service manuals if exist.